All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: pali@kernel.org, kabel@kernel.org, lorenzo.pieralisi@arm.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] PCI: aardvark: Fix support for bus mastering and PCI_COMMAND" failed to apply to 4.19-stable tree
Date: Sun, 14 Nov 2021 14:53:10 +0100	[thread overview]
Message-ID: <163689799019031@kroah.com> (raw)


The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 771153fc884f566a89af2d30033b7f3bc6e24e84 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
Date: Thu, 28 Oct 2021 20:56:56 +0200
Subject: [PATCH] PCI: aardvark: Fix support for bus mastering and PCI_COMMAND
 on emulated bridge
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

From very vague, ambiguous and incomplete information from Marvell we
deduced that the 32-bit Aardvark register at address 0x4
(PCIE_CORE_CMD_STATUS_REG), which is not documented for Root Complex mode
in the Functional Specification (only for Endpoint mode), controls two
16-bit PCIe registers: Command Register and Status Registers of PCIe Root
Port.

This means that bit 2 controls bus mastering and forwarding of memory and
I/O requests in the upstream direction. According to PCI specifications
bits [0:2] of Command Register, this should be by default disabled on
reset. So explicitly disable these bits at early setup of the Aardvark
driver.

Remove code which unconditionally enables all 3 bits and let kernel code
(via pci_set_master() function) to handle bus mastering of Root PCIe
Bridge via emulated PCI_COMMAND on emulated bridge.

Link: https://lore.kernel.org/r/20211028185659.20329-5-kabel@kernel.org
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org # b2a56469d550 ("PCI: aardvark: Add FIXME comment for PCIE_CORE_CMD_STATUS_REG access")

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 389ebba1dd9b..d7db03da4d1c 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -31,9 +31,6 @@
 /* PCIe core registers */
 #define PCIE_CORE_DEV_ID_REG					0x0
 #define PCIE_CORE_CMD_STATUS_REG				0x4
-#define     PCIE_CORE_CMD_IO_ACCESS_EN				BIT(0)
-#define     PCIE_CORE_CMD_MEM_ACCESS_EN				BIT(1)
-#define     PCIE_CORE_CMD_MEM_IO_REQ_EN				BIT(2)
 #define PCIE_CORE_DEV_REV_REG					0x8
 #define PCIE_CORE_PCIEXP_CAP					0xc0
 #define PCIE_CORE_ERR_CAPCTL_REG				0x118
@@ -514,6 +511,11 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 	reg = (PCI_VENDOR_ID_MARVELL << 16) | PCI_VENDOR_ID_MARVELL;
 	advk_writel(pcie, reg, VENDOR_ID_REG);
 
+	/* Disable Root Bridge I/O space, memory space and bus mastering */
+	reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
+	reg &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
+
 	/* Set Advanced Error Capabilities and Control PF0 register */
 	reg = PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX |
 		PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN |
@@ -612,19 +614,6 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 		advk_pcie_disable_ob_win(pcie, i);
 
 	advk_pcie_train_link(pcie);
-
-	/*
-	 * FIXME: The following register update is suspicious. This register is
-	 * applicable only when the PCI controller is configured for Endpoint
-	 * mode, not as a Root Complex. But apparently when this code is
-	 * removed, some cards stop working. This should be investigated and
-	 * a comment explaining this should be put here.
-	 */
-	reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
-	reg |= PCIE_CORE_CMD_MEM_ACCESS_EN |
-		PCIE_CORE_CMD_IO_ACCESS_EN |
-		PCIE_CORE_CMD_MEM_IO_REQ_EN;
-	advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
 }
 
 static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u32 *val)
@@ -753,6 +742,37 @@ static int advk_pcie_wait_pio(struct advk_pcie *pcie)
 	return -ETIMEDOUT;
 }
 
+static pci_bridge_emul_read_status_t
+advk_pci_bridge_emul_base_conf_read(struct pci_bridge_emul *bridge,
+				    int reg, u32 *value)
+{
+	struct advk_pcie *pcie = bridge->data;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		*value = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
+		return PCI_BRIDGE_EMUL_HANDLED;
+
+	default:
+		return PCI_BRIDGE_EMUL_NOT_HANDLED;
+	}
+}
+
+static void
+advk_pci_bridge_emul_base_conf_write(struct pci_bridge_emul *bridge,
+				     int reg, u32 old, u32 new, u32 mask)
+{
+	struct advk_pcie *pcie = bridge->data;
+
+	switch (reg) {
+	case PCI_COMMAND:
+		advk_writel(pcie, new, PCIE_CORE_CMD_STATUS_REG);
+		break;
+
+	default:
+		break;
+	}
+}
 
 static pci_bridge_emul_read_status_t
 advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
@@ -854,6 +874,8 @@ advk_pci_bridge_emul_pcie_conf_write(struct pci_bridge_emul *bridge,
 }
 
 static struct pci_bridge_emul_ops advk_pci_bridge_emul_ops = {
+	.read_base = advk_pci_bridge_emul_base_conf_read,
+	.write_base = advk_pci_bridge_emul_base_conf_write,
 	.read_pcie = advk_pci_bridge_emul_pcie_conf_read,
 	.write_pcie = advk_pci_bridge_emul_pcie_conf_write,
 };


                 reply	other threads:[~2021-11-14 13:53 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=163689799019031@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=kabel@kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=pali@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.