From: <gregkh@linuxfoundation.org>
To: hsiangkao@linux.alibaba.com, chao@kernel.org, stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] erofs: fix unsafe pagevec reuse of hooked pclusters" failed to apply to 5.4-stable tree
Date: Mon, 15 Nov 2021 14:37:41 +0100 [thread overview]
Message-ID: <163698346111096@kroah.com> (raw)
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 86432a6dca9bed79111990851df5756d3eb5f57c Mon Sep 17 00:00:00 2001
From: Gao Xiang <hsiangkao@linux.alibaba.com>
Date: Thu, 4 Nov 2021 02:20:06 +0800
Subject: [PATCH] erofs: fix unsafe pagevec reuse of hooked pclusters
There are pclusters in runtime marked with Z_EROFS_PCLUSTER_TAIL
before actual I/O submission. Thus, the decompression chain can be
extended if the following pcluster chain hooks such tail pcluster.
As the related comment mentioned, if some page is made of a hooked
pcluster and another followed pcluster, it can be reused for in-place
I/O (since I/O should be submitted anyway):
_______________________________________________________________
| tail (partial) page | head (partial) page |
|_____PRIMARY_HOOKED___|____________PRIMARY_FOLLOWED____________|
However, it's by no means safe to reuse as pagevec since if such
PRIMARY_HOOKED pclusters finally move into bypass chain without I/O
submission. It's somewhat hard to reproduce with LZ4 and I just found
it (general protection fault) by ro_fsstressing a LZMA image for long
time.
I'm going to actively clean up related code together with multi-page
folio adaption in the next few months. Let's address it directly for
easier backporting for now.
Call trace for reference:
z_erofs_decompress_pcluster+0x10a/0x8a0 [erofs]
z_erofs_decompress_queue.isra.36+0x3c/0x60 [erofs]
z_erofs_runqueue+0x5f3/0x840 [erofs]
z_erofs_readahead+0x1e8/0x320 [erofs]
read_pages+0x91/0x270
page_cache_ra_unbounded+0x18b/0x240
filemap_get_pages+0x10a/0x5f0
filemap_read+0xa9/0x330
new_sync_read+0x11b/0x1a0
vfs_read+0xf1/0x190
Link: https://lore.kernel.org/r/20211103182006.4040-1-xiang@kernel.org
Fixes: 3883a79abd02 ("staging: erofs: introduce VLE decompression support")
Cc: <stable@vger.kernel.org> # 4.19+
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
diff --git a/fs/erofs/zdata.c b/fs/erofs/zdata.c
index 11c7a1aaebad..eb51df4a9f77 100644
--- a/fs/erofs/zdata.c
+++ b/fs/erofs/zdata.c
@@ -373,8 +373,8 @@ static bool z_erofs_try_inplace_io(struct z_erofs_collector *clt,
/* callers must be with collection lock held */
static int z_erofs_attach_page(struct z_erofs_collector *clt,
- struct page *page,
- enum z_erofs_page_type type)
+ struct page *page, enum z_erofs_page_type type,
+ bool pvec_safereuse)
{
int ret;
@@ -384,9 +384,9 @@ static int z_erofs_attach_page(struct z_erofs_collector *clt,
z_erofs_try_inplace_io(clt, page))
return 0;
- ret = z_erofs_pagevec_enqueue(&clt->vector, page, type);
+ ret = z_erofs_pagevec_enqueue(&clt->vector, page, type,
+ pvec_safereuse);
clt->cl->vcnt += (unsigned int)ret;
-
return ret ? 0 : -EAGAIN;
}
@@ -729,7 +729,8 @@ static int z_erofs_do_read_page(struct z_erofs_decompress_frontend *fe,
tight &= (clt->mode >= COLLECT_PRIMARY_FOLLOWED);
retry:
- err = z_erofs_attach_page(clt, page, page_type);
+ err = z_erofs_attach_page(clt, page, page_type,
+ clt->mode >= COLLECT_PRIMARY_FOLLOWED);
/* should allocate an additional short-lived page for pagevec */
if (err == -EAGAIN) {
struct page *const newpage =
@@ -737,7 +738,7 @@ static int z_erofs_do_read_page(struct z_erofs_decompress_frontend *fe,
set_page_private(newpage, Z_EROFS_SHORTLIVED_PAGE);
err = z_erofs_attach_page(clt, newpage,
- Z_EROFS_PAGE_TYPE_EXCLUSIVE);
+ Z_EROFS_PAGE_TYPE_EXCLUSIVE, true);
if (!err)
goto retry;
}
diff --git a/fs/erofs/zpvec.h b/fs/erofs/zpvec.h
index dfd7fe0503bb..b05464f4a808 100644
--- a/fs/erofs/zpvec.h
+++ b/fs/erofs/zpvec.h
@@ -106,11 +106,18 @@ static inline void z_erofs_pagevec_ctor_init(struct z_erofs_pagevec_ctor *ctor,
static inline bool z_erofs_pagevec_enqueue(struct z_erofs_pagevec_ctor *ctor,
struct page *page,
- enum z_erofs_page_type type)
+ enum z_erofs_page_type type,
+ bool pvec_safereuse)
{
- if (!ctor->next && type)
- if (ctor->index + 1 == ctor->nr)
+ if (!ctor->next) {
+ /* some pages cannot be reused as pvec safely without I/O */
+ if (type == Z_EROFS_PAGE_TYPE_EXCLUSIVE && !pvec_safereuse)
+ type = Z_EROFS_VLE_PAGE_TYPE_TAIL_SHARED;
+
+ if (type != Z_EROFS_PAGE_TYPE_EXCLUSIVE &&
+ ctor->index + 1 == ctor->nr)
return false;
+ }
if (ctor->index >= ctor->nr)
z_erofs_pagevec_ctor_pagedown(ctor, false);
next reply other threads:[~2021-11-15 13:38 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-11-15 13:37 gregkh [this message]
2021-11-16 1:10 ` [PATCH 5.4.y 1/2] erofs: remove the occupied parameter from z_erofs_pagevec_enqueue() Gao Xiang
2021-11-16 1:10 ` Gao Xiang
2021-11-16 1:10 ` [PATCH 5.4.y 2/2] erofs: fix unsafe pagevec reuse of hooked pclusters Gao Xiang
2021-11-16 1:10 ` Gao Xiang
2021-11-19 14:34 ` Patch "erofs: fix unsafe pagevec reuse of hooked pclusters" has been added to the 5.4-stable tree gregkh
2021-11-19 14:34 ` Patch "erofs: remove the occupied parameter from z_erofs_pagevec_enqueue()" " gregkh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=163698346111096@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=chao@kernel.org \
--cc=hsiangkao@linux.alibaba.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.