Re: [PATCH v1 1/2] dt-bindings: iio: accel: add ADXL367

[Rob Herring <robh@kernel.org>]

On Mon, 06 Dec 2021 12:54:02 +0200, Cosmin Tanislav wrote:
> The ADXL367 is an ultralow power, 3-axis MEMS accelerometer.
> 
> The ADXL367 does not alias input signals to achieve ultralow power
> consumption, it samples the full bandwidth of the sensor at all
> data rates. Measurement ranges of +-2g, +-4g, and +-8g are available,
> with a resolution of 0.25mg/LSB on the +-2 g range.
> 
> In addition to its ultralow power consumption, the ADXL367
> has many features to enable true system level power reduction.
> It includes a deep multimode output FIFO, a built-in micropower
> temperature sensor, and an internal ADC for synchronous conversion
> of an additional analog input.
> 
> Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
> ---
>  .../bindings/iio/accel/adi,adxl367.yaml       | 79 +++++++++++++++++++
>  1 file changed, 79 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/adi,adxl367.example.dt.yaml: adxl367@0: 'spi-max-frequency' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/accel/adi,adxl367.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/1563904

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.