patch "usb: dwc2: fix STM ID/VBUS detection startup delay in" added to usb-linus

[<gregkh@linuxfoundation.org>]

This is a note to let you know that I've just added the patch titled

    usb: dwc2: fix STM ID/VBUS detection startup delay in

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


From fac6bf87c55f7f0733efb0375565fb6a50cf2caf Mon Sep 17 00:00:00 2001
From: Amelie Delaunay <amelie.delaunay@foss.st.com>
Date: Tue, 7 Dec 2021 13:45:10 +0100
Subject: usb: dwc2: fix STM ID/VBUS detection startup delay in
 dwc2_driver_probe

When activate_stm_id_vb_detection is enabled, ID and Vbus detection relies
on sensing comparators. This detection needs time to stabilize.
A delay was already applied in dwc2_resume() when reactivating the
detection, but it wasn't done in dwc2_probe().
This patch adds delay after enabling STM ID/VBUS detection. Then, ID state
is good when initializing gadget and host, and avoid to get a wrong
Connector ID Status Change interrupt.

Fixes: a415083a11cc ("usb: dwc2: add support for STM32MP15 SoCs USB OTG HS and FS")
Cc: stable <stable@vger.kernel.org>
Acked-by: Minas Harutyunyan <Minas.Harutyunyan@synopsys.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20211207124510.268841-1-amelie.delaunay@foss.st.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/dwc2/platform.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/usb/dwc2/platform.c b/drivers/usb/dwc2/platform.c
index c8f18f3ba9e3..c331a5128c2c 100644
--- a/drivers/usb/dwc2/platform.c
+++ b/drivers/usb/dwc2/platform.c
@@ -575,6 +575,9 @@ static int dwc2_driver_probe(struct platform_device *dev)
 		ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
 		ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
 		dwc2_writel(hsotg, ggpio, GGPIO);
+
+		/* ID/VBUS detection startup time */
+		usleep_range(5000, 7000);
 	}
 
 	retval = dwc2_drd_init(hsotg);
-- 
2.34.1