From: <gregkh@linuxfoundation.org>
To: hverkuil-cisco@xs4all.nl, mchehab+huawei@kernel.org,
stable@vger.kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] media: cec-pin: fix interrupt en/disable handling" failed to apply to 4.19-stable tree
Date: Sun, 23 Jan 2022 15:22:36 +0100 [thread overview]
Message-ID: <1642947756113132@kroah.com> (raw)
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 713bdfa10b5957053811470d298def9537d9ff13 Mon Sep 17 00:00:00 2001
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Date: Wed, 1 Dec 2021 13:41:25 +0100
Subject: [PATCH] media: cec-pin: fix interrupt en/disable handling
The en/disable_irq() functions keep track of the 'depth': i.e. if
interrupts are disabled twice, then it needs to enable_irq() calls to
enable them again. The cec-pin framework didn't take this into accound
and could disable irqs multiple times, and it expected that a single
enable_irq() would enable them again.
Move all calls to en/disable_irq() to the kthread where it is easy
to keep track of the current irq state and ensure that multiple
en/disable_irq calls never happen.
If interrupts where disabled twice, then they would never turn on
again, leaving the CEC adapter in a dead state.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Fixes: 865463fc03ed (media: cec-pin: add error injection support)
Cc: <stable@vger.kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
diff --git a/drivers/media/cec/core/cec-pin.c b/drivers/media/cec/core/cec-pin.c
index 2b6459df1e94..21f0f749713e 100644
--- a/drivers/media/cec/core/cec-pin.c
+++ b/drivers/media/cec/core/cec-pin.c
@@ -1033,6 +1033,7 @@ static int cec_pin_thread_func(void *_adap)
{
struct cec_adapter *adap = _adap;
struct cec_pin *pin = adap->pin;
+ bool irq_enabled = false;
for (;;) {
wait_event_interruptible(pin->kthread_waitq,
@@ -1060,6 +1061,7 @@ static int cec_pin_thread_func(void *_adap)
ns_to_ktime(pin->work_rx_msg.rx_ts));
msg->len = 0;
}
+
if (pin->work_tx_status) {
unsigned int tx_status = pin->work_tx_status;
@@ -1083,27 +1085,39 @@ static int cec_pin_thread_func(void *_adap)
switch (atomic_xchg(&pin->work_irq_change,
CEC_PIN_IRQ_UNCHANGED)) {
case CEC_PIN_IRQ_DISABLE:
- pin->ops->disable_irq(adap);
+ if (irq_enabled) {
+ pin->ops->disable_irq(adap);
+ irq_enabled = false;
+ }
cec_pin_high(pin);
cec_pin_to_idle(pin);
hrtimer_start(&pin->timer, ns_to_ktime(0),
HRTIMER_MODE_REL);
break;
case CEC_PIN_IRQ_ENABLE:
+ if (irq_enabled)
+ break;
pin->enable_irq_failed = !pin->ops->enable_irq(adap);
if (pin->enable_irq_failed) {
cec_pin_to_idle(pin);
hrtimer_start(&pin->timer, ns_to_ktime(0),
HRTIMER_MODE_REL);
+ } else {
+ irq_enabled = true;
}
break;
default:
break;
}
-
if (kthread_should_stop())
break;
}
+ if (pin->ops->disable_irq && irq_enabled)
+ pin->ops->disable_irq(adap);
+ hrtimer_cancel(&pin->timer);
+ cec_pin_read(pin);
+ cec_pin_to_idle(pin);
+ pin->state = CEC_ST_OFF;
return 0;
}
@@ -1129,13 +1143,7 @@ static int cec_pin_adap_enable(struct cec_adapter *adap, bool enable)
hrtimer_start(&pin->timer, ns_to_ktime(0),
HRTIMER_MODE_REL);
} else {
- if (pin->ops->disable_irq)
- pin->ops->disable_irq(adap);
- hrtimer_cancel(&pin->timer);
kthread_stop(pin->kthread);
- cec_pin_read(pin);
- cec_pin_to_idle(pin);
- pin->state = CEC_ST_OFF;
}
return 0;
}
@@ -1156,11 +1164,8 @@ void cec_pin_start_timer(struct cec_pin *pin)
if (pin->state != CEC_ST_RX_IRQ)
return;
- atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_UNCHANGED);
- pin->ops->disable_irq(pin->adap);
- cec_pin_high(pin);
- cec_pin_to_idle(pin);
- hrtimer_start(&pin->timer, ns_to_ktime(0), HRTIMER_MODE_REL);
+ atomic_set(&pin->work_irq_change, CEC_PIN_IRQ_DISABLE);
+ wake_up_interruptible(&pin->kthread_waitq);
}
static int cec_pin_adap_transmit(struct cec_adapter *adap, u8 attempts,
reply other threads:[~2022-01-23 14:22 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1642947756113132@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=mchehab+huawei@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.