From: <gregkh@linuxfoundation.org>
To: pali@kernel.org, lorenzo.pieralisi@arm.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] PCI: pci-bridge-emul: Fix definitions of reserved bits" failed to apply to 5.4-stable tree
Date: Sun, 23 Jan 2022 18:01:49 +0100 [thread overview]
Message-ID: <1642957309148161@kroah.com> (raw)
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 12998087d9f48b66965b97412069c7826502cd7e Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Pali=20Roh=C3=A1r?= <pali@kernel.org>
Date: Wed, 24 Nov 2021 16:59:42 +0100
Subject: [PATCH] PCI: pci-bridge-emul: Fix definitions of reserved bits
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Some bits in PCI_EXP registers are reserved for non-root ports. Driver
pci-bridge-emul.c implements PCIe Root Port device therefore it should not
allow setting reserved bits of registers.
Properly define non-reserved bits for all PCI_EXP registers.
Link: https://lore.kernel.org/r/20211124155944.1290-5-pali@kernel.org
Fixes: 23a5fba4d941 ("PCI: Introduce PCI bridge emulated config space common logic")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
diff --git a/drivers/pci/pci-bridge-emul.c b/drivers/pci/pci-bridge-emul.c
index 0cbb4e3ca827..2c7e04fb2685 100644
--- a/drivers/pci/pci-bridge-emul.c
+++ b/drivers/pci/pci-bridge-emul.c
@@ -176,41 +176,55 @@ struct pci_bridge_reg_behavior pcie_cap_regs_behavior[PCI_CAP_PCIE_SIZEOF / 4] =
[PCI_CAP_LIST_ID / 4] = {
/*
* Capability ID, Next Capability Pointer and
- * Capabilities register are all read-only.
+ * bits [14:0] of Capabilities register are all read-only.
+ * Bit 15 of Capabilities register is reserved.
*/
- .ro = ~0,
+ .ro = GENMASK(30, 0),
},
[PCI_EXP_DEVCAP / 4] = {
- .ro = ~0,
+ /*
+ * Bits [31:29] and [17:16] are reserved.
+ * Bits [27:18] are reserved for non-upstream ports.
+ * Bits 28 and [14:6] are reserved for non-endpoint devices.
+ * Other bits are read-only.
+ */
+ .ro = BIT(15) | GENMASK(5, 0),
},
[PCI_EXP_DEVCTL / 4] = {
- /* Device control register is RW */
- .rw = GENMASK(15, 0),
+ /*
+ * Device control register is RW, except bit 15 which is
+ * reserved for non-endpoints or non-PCIe-to-PCI/X bridges.
+ */
+ .rw = GENMASK(14, 0),
/*
* Device status register has bits 6 and [3:0] W1C, [5:4] RO,
- * the rest is reserved
+ * the rest is reserved. Also bit 6 is reserved for non-upstream
+ * ports.
*/
- .w1c = (BIT(6) | GENMASK(3, 0)) << 16,
+ .w1c = GENMASK(3, 0) << 16,
.ro = GENMASK(5, 4) << 16,
},
[PCI_EXP_LNKCAP / 4] = {
- /* All bits are RO, except bit 23 which is reserved */
- .ro = lower_32_bits(~BIT(23)),
+ /*
+ * All bits are RO, except bit 23 which is reserved and
+ * bit 18 which is reserved for non-upstream ports.
+ */
+ .ro = lower_32_bits(~(BIT(23) | PCI_EXP_LNKCAP_CLKPM)),
},
[PCI_EXP_LNKCTL / 4] = {
/*
* Link control has bits [15:14], [11:3] and [1:0] RW, the
- * rest is reserved.
+ * rest is reserved. Bit 8 is reserved for non-upstream ports.
*
* Link status has bits [13:0] RO, and bits [15:14]
* W1C.
*/
- .rw = GENMASK(15, 14) | GENMASK(11, 3) | GENMASK(1, 0),
+ .rw = GENMASK(15, 14) | GENMASK(11, 9) | GENMASK(7, 3) | GENMASK(1, 0),
.ro = GENMASK(13, 0) << 16,
.w1c = GENMASK(15, 14) << 16,
},
reply other threads:[~2022-01-23 17:01 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1642957309148161@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=pali@kernel.org \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.