From: <gregkh@linuxfoundation.org>
To: ghalem.boudour@6wind.com, nicolas.dichtel@6wind.com,
steffen.klassert@secunet.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] xfrm: fix policy lookup for ipv6 gre packets" failed to apply to 4.4-stable tree
Date: Sun, 23 Jan 2022 18:02:55 +0100 [thread overview]
Message-ID: <164295737514835@kroah.com> (raw)
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From bcf141b2eb551b3477b24997ebc09c65f117a803 Mon Sep 17 00:00:00 2001
From: Ghalem Boudour <ghalem.boudour@6wind.com>
Date: Fri, 19 Nov 2021 18:20:16 +0100
Subject: [PATCH] xfrm: fix policy lookup for ipv6 gre packets
On egress side, xfrm lookup is called from __gre6_xmit() with the
fl6_gre_key field not initialized leading to policies selectors check
failure. Consequently, gre packets are sent without encryption.
On ingress side, INET6_PROTO_NOPOLICY was set, thus packets were not
checked against xfrm policies. Like for egress side, fl6_gre_key should be
correctly set, this is now done in decode_session6().
Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Cc: stable@vger.kernel.org
Signed-off-by: Ghalem Boudour <ghalem.boudour@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index d831d2439693..f5a511c57aa2 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -755,6 +755,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
fl6->daddr = key->u.ipv6.dst;
fl6->flowlabel = key->label;
fl6->flowi6_uid = sock_net_uid(dev_net(dev), NULL);
+ fl6->fl6_gre_key = tunnel_id_to_key32(key->tun_id);
dsfield = key->tos;
flags = key->tun_flags &
@@ -990,6 +991,7 @@ static netdev_tx_t ip6erspan_tunnel_xmit(struct sk_buff *skb,
fl6.daddr = key->u.ipv6.dst;
fl6.flowlabel = key->label;
fl6.flowi6_uid = sock_net_uid(dev_net(dev), NULL);
+ fl6.fl6_gre_key = tunnel_id_to_key32(key->tun_id);
dsfield = key->tos;
if (!(tun_info->key.tun_flags & TUNNEL_ERSPAN_OPT))
@@ -1098,6 +1100,7 @@ static void ip6gre_tnl_link_config_common(struct ip6_tnl *t)
fl6->flowi6_oif = p->link;
fl6->flowlabel = 0;
fl6->flowi6_proto = IPPROTO_GRE;
+ fl6->fl6_gre_key = t->parms.o_key;
if (!(p->flags&IP6_TNL_F_USE_ORIG_TCLASS))
fl6->flowlabel |= IPV6_TCLASS_MASK & p->flowinfo;
@@ -1544,7 +1547,7 @@ static void ip6gre_fb_tunnel_init(struct net_device *dev)
static struct inet6_protocol ip6gre_protocol __read_mostly = {
.handler = gre_rcv,
.err_handler = ip6gre_err,
- .flags = INET6_PROTO_NOPOLICY|INET6_PROTO_FINAL,
+ .flags = INET6_PROTO_FINAL,
};
static void ip6gre_destroy_tunnels(struct net *net, struct list_head *head)
diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c
index 1a06585022ab..84d2361da015 100644
--- a/net/xfrm/xfrm_policy.c
+++ b/net/xfrm/xfrm_policy.c
@@ -33,6 +33,7 @@
#include <net/flow.h>
#include <net/xfrm.h>
#include <net/ip.h>
+#include <net/gre.h>
#if IS_ENABLED(CONFIG_IPV6_MIP6)
#include <net/mip6.h>
#endif
@@ -3422,6 +3423,26 @@ decode_session6(struct sk_buff *skb, struct flowi *fl, bool reverse)
}
fl6->flowi6_proto = nexthdr;
return;
+ case IPPROTO_GRE:
+ if (!onlyproto &&
+ (nh + offset + 12 < skb->data ||
+ pskb_may_pull(skb, nh + offset + 12 - skb->data))) {
+ struct gre_base_hdr *gre_hdr;
+ __be32 *gre_key;
+
+ nh = skb_network_header(skb);
+ gre_hdr = (struct gre_base_hdr *)(nh + offset);
+ gre_key = (__be32 *)(gre_hdr + 1);
+
+ if (gre_hdr->flags & GRE_KEY) {
+ if (gre_hdr->flags & GRE_CSUM)
+ gre_key++;
+ fl6->fl6_gre_key = *gre_key;
+ }
+ }
+ fl6->flowi6_proto = nexthdr;
+ return;
+
#if IS_ENABLED(CONFIG_IPV6_MIP6)
case IPPROTO_MH:
offset += ipv6_optlen(exthdr);
reply other threads:[~2022-01-23 17:03 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=164295737514835@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=ghalem.boudour@6wind.com \
--cc=nicolas.dichtel@6wind.com \
--cc=stable@vger.kernel.org \
--cc=steffen.klassert@secunet.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.