All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: jannh@google.com, gregkh@linuxfoundation.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] net: usb: ax88179_178a: Fix out-of-bounds accesses in RX" failed to apply to 4.14-stable tree
Date: Sun, 13 Feb 2022 12:16:58 +0100	[thread overview]
Message-ID: <164475101811131@kroah.com> (raw)


The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 57bc3d3ae8c14df3ceb4e17d26ddf9eeab304581 Mon Sep 17 00:00:00 2001
From: Jann Horn <jannh@google.com>
Date: Wed, 26 Jan 2022 14:14:52 +0100
Subject: [PATCH] net: usb: ax88179_178a: Fix out-of-bounds accesses in RX
 fixup

ax88179_rx_fixup() contains several out-of-bounds accesses that can be
triggered by a malicious (or defective) USB device, in particular:

 - The metadata array (hdr_off..hdr_off+2*pkt_cnt) can be out of bounds,
   causing OOB reads and (on big-endian systems) OOB endianness flips.
 - A packet can overlap the metadata array, causing a later OOB
   endianness flip to corrupt data used by a cloned SKB that has already
   been handed off into the network stack.
 - A packet SKB can be constructed whose tail is far beyond its end,
   causing out-of-bounds heap data to be considered part of the SKB's
   data.

I have tested that this can be used by a malicious USB device to send a
bogus ICMPv6 Echo Request and receive an ICMPv6 Echo Reply in response
that contains random kernel heap data.
It's probably also possible to get OOB writes from this on a
little-endian system somehow - maybe by triggering skb_cow() via IP
options processing -, but I haven't tested that.

Fixes: e2ca90c276e1 ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver")
Cc: stable@kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index 1a627ba4b850..a31098981a65 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1468,58 +1468,68 @@ static int ax88179_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	u16 hdr_off;
 	u32 *pkt_hdr;
 
-	/* This check is no longer done by usbnet */
-	if (skb->len < dev->net->hard_header_len)
+	/* At the end of the SKB, there's a header telling us how many packets
+	 * are bundled into this buffer and where we can find an array of
+	 * per-packet metadata (which contains elements encoded into u16).
+	 */
+	if (skb->len < 4)
 		return 0;
-
 	skb_trim(skb, skb->len - 4);
 	rx_hdr = get_unaligned_le32(skb_tail_pointer(skb));
-
 	pkt_cnt = (u16)rx_hdr;
 	hdr_off = (u16)(rx_hdr >> 16);
+
+	if (pkt_cnt == 0)
+		return 0;
+
+	/* Make sure that the bounds of the metadata array are inside the SKB
+	 * (and in front of the counter at the end).
+	 */
+	if (pkt_cnt * 2 + hdr_off > skb->len)
+		return 0;
 	pkt_hdr = (u32 *)(skb->data + hdr_off);
 
-	while (pkt_cnt--) {
+	/* Packets must not overlap the metadata array */
+	skb_trim(skb, hdr_off);
+
+	for (; ; pkt_cnt--, pkt_hdr++) {
 		u16 pkt_len;
 
 		le32_to_cpus(pkt_hdr);
 		pkt_len = (*pkt_hdr >> 16) & 0x1fff;
 
-		/* Check CRC or runt packet */
-		if ((*pkt_hdr & AX_RXHDR_CRC_ERR) ||
-		    (*pkt_hdr & AX_RXHDR_DROP_ERR)) {
-			skb_pull(skb, (pkt_len + 7) & 0xFFF8);
-			pkt_hdr++;
-			continue;
-		}
-
-		if (pkt_cnt == 0) {
-			skb->len = pkt_len;
-			/* Skip IP alignment pseudo header */
-			skb_pull(skb, 2);
-			skb_set_tail_pointer(skb, skb->len);
-			skb->truesize = pkt_len + sizeof(struct sk_buff);
-			ax88179_rx_checksum(skb, pkt_hdr);
-			return 1;
-		}
+		if (pkt_len > skb->len)
+			return 0;
 
-		ax_skb = skb_clone(skb, GFP_ATOMIC);
-		if (ax_skb) {
+		/* Check CRC or runt packet */
+		if (((*pkt_hdr & (AX_RXHDR_CRC_ERR | AX_RXHDR_DROP_ERR)) == 0) &&
+		    pkt_len >= 2 + ETH_HLEN) {
+			bool last = (pkt_cnt == 0);
+
+			if (last) {
+				ax_skb = skb;
+			} else {
+				ax_skb = skb_clone(skb, GFP_ATOMIC);
+				if (!ax_skb)
+					return 0;
+			}
 			ax_skb->len = pkt_len;
 			/* Skip IP alignment pseudo header */
 			skb_pull(ax_skb, 2);
 			skb_set_tail_pointer(ax_skb, ax_skb->len);
 			ax_skb->truesize = pkt_len + sizeof(struct sk_buff);
 			ax88179_rx_checksum(ax_skb, pkt_hdr);
+
+			if (last)
+				return 1;
+
 			usbnet_skb_return(dev, ax_skb);
-		} else {
-			return 0;
 		}
 
-		skb_pull(skb, (pkt_len + 7) & 0xFFF8);
-		pkt_hdr++;
+		/* Trim this packet away from the SKB */
+		if (!skb_pull(skb, (pkt_len + 7) & 0xFFF8))
+			return 0;
 	}
-	return 1;
 }
 
 static struct sk_buff *


                 reply	other threads:[~2022-02-13 11:17 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=164475101811131@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=jannh@google.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.