From: <gregkh@linuxfoundation.org>
To: chengzhihao1@huawei.com, kechengsong@huawei.com, richard@nod.at
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()" failed to apply to 4.9-stable tree
Date: Sun, 03 Apr 2022 13:43:25 +0200 [thread overview]
Message-ID: <164898620536154@kroah.com> (raw)
The patch below does not apply to the 4.9-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 4f2262a334641e05f645364d5ade1f565c85f20b Mon Sep 17 00:00:00 2001
From: Zhihao Cheng <chengzhihao1@huawei.com>
Date: Mon, 27 Dec 2021 11:22:40 +0800
Subject: [PATCH] ubifs: Fix read out-of-bounds in ubifs_wbuf_write_nolock()
Function ubifs_wbuf_write_nolock() may access buf out of bounds in
following process:
ubifs_wbuf_write_nolock():
aligned_len = ALIGN(len, 8); // Assume len = 4089, aligned_len = 4096
if (aligned_len <= wbuf->avail) ... // Not satisfy
if (wbuf->used) {
ubifs_leb_write() // Fill some data in avail wbuf
len -= wbuf->avail; // len is still not 8-bytes aligned
aligned_len -= wbuf->avail;
}
n = aligned_len >> c->max_write_shift;
if (n) {
n <<= c->max_write_shift;
err = ubifs_leb_write(c, wbuf->lnum, buf + written,
wbuf->offs, n);
// n > len, read out of bounds less than 8(n-len) bytes
}
, which can be catched by KASAN:
=========================================================
BUG: KASAN: slab-out-of-bounds in ecc_sw_hamming_calculate+0x1dc/0x7d0
Read of size 4 at addr ffff888105594ff8 by task kworker/u8:4/128
Workqueue: writeback wb_workfn (flush-ubifs_0_0)
Call Trace:
kasan_report.cold+0x81/0x165
nand_write_page_swecc+0xa9/0x160
ubifs_leb_write+0xf2/0x1b0 [ubifs]
ubifs_wbuf_write_nolock+0x421/0x12c0 [ubifs]
write_head+0xdc/0x1c0 [ubifs]
ubifs_jnl_write_inode+0x627/0x960 [ubifs]
wb_workfn+0x8af/0xb80
Function ubifs_wbuf_write_nolock() accepts that parameter 'len' is not 8
bytes aligned, the 'len' represents the true length of buf (which is
allocated in 'ubifs_jnl_xxx', eg. ubifs_jnl_write_inode), so
ubifs_wbuf_write_nolock() must handle the length read from 'buf' carefully
to write leb safely.
Fetch a reproducer in [Link].
Fixes: 1e51764a3c2ac0 ("UBIFS: add new flash file system")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=214785
Reported-by: Chengsong Ke <kechengsong@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c
index 789a7813f3fa..1607a3c76681 100644
--- a/fs/ubifs/io.c
+++ b/fs/ubifs/io.c
@@ -854,16 +854,42 @@ int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len)
*/
n = aligned_len >> c->max_write_shift;
if (n) {
- n <<= c->max_write_shift;
+ int m = n - 1;
+
dbg_io("write %d bytes to LEB %d:%d", n, wbuf->lnum,
wbuf->offs);
- err = ubifs_leb_write(c, wbuf->lnum, buf + written,
- wbuf->offs, n);
+
+ if (m) {
+ /* '(n-1)<<c->max_write_shift < len' is always true. */
+ m <<= c->max_write_shift;
+ err = ubifs_leb_write(c, wbuf->lnum, buf + written,
+ wbuf->offs, m);
+ if (err)
+ goto out;
+ wbuf->offs += m;
+ aligned_len -= m;
+ len -= m;
+ written += m;
+ }
+
+ /*
+ * The non-written len of buf may be less than 'n' because
+ * parameter 'len' is not 8 bytes aligned, so here we read
+ * min(len, n) bytes from buf.
+ */
+ n = 1 << c->max_write_shift;
+ memcpy(wbuf->buf, buf + written, min(len, n));
+ if (n > len) {
+ ubifs_assert(c, n - len < 8);
+ ubifs_pad(c, wbuf->buf + len, n - len);
+ }
+
+ err = ubifs_leb_write(c, wbuf->lnum, wbuf->buf, wbuf->offs, n);
if (err)
goto out;
wbuf->offs += n;
aligned_len -= n;
- len -= n;
+ len -= min(len, n);
written += n;
}
reply other threads:[~2022-04-03 11:44 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=164898620536154@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=chengzhihao1@huawei.com \
--cc=kechengsong@huawei.com \
--cc=richard@nod.at \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.