From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: Linux 5.4.192
Date: Mon, 9 May 2022 09:37:47 +0200 [thread overview]
Message-ID: <16520818661988@kroah.com> (raw)
In-Reply-To: <16520818664210@kroah.com>
diff --git a/Makefile b/Makefile
index 365b487e50d7..968470cf368e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 4
-SUBLEVEL = 191
+SUBLEVEL = 192
EXTRAVERSION =
NAME = Kleptomaniac Octopus
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts
index a1fd3e63e86e..3db30ce134b9 100644
--- a/arch/arm/boot/dts/am3517-evm.dts
+++ b/arch/arm/boot/dts/am3517-evm.dts
@@ -160,6 +160,8 @@
/* HS USB Host PHY on PORT 1 */
hsusb1_phy: hsusb1_phy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_rst_pins>;
compatible = "usb-nop-xceiv";
reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
#phy-cells = <0>;
@@ -167,7 +169,9 @@
};
&davinci_emac {
- status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <ðernet_pins>;
+ status = "okay";
};
&davinci_mdio {
@@ -192,6 +196,8 @@
};
&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins>;
clock-frequency = <400000>;
/* User DIP swithes [1:8] / User LEDS [1:2] */
tca6416: gpio@21 {
@@ -204,6 +210,8 @@
};
&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
clock-frequency = <400000>;
};
@@ -222,6 +230,8 @@
};
&usbhshost {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb1_pins>;
port1-mode = "ehci-phy";
};
@@ -230,8 +240,35 @@
};
&omap3_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb1_rst_pins>;
+
+ ethernet_pins: pinmux_ethernet_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21fe, PIN_INPUT | MUX_MODE0) /* rmii_mdio_data */
+ OMAP3_CORE1_IOPAD(0x2200, MUX_MODE0) /* rmii_mdio_clk */
+ OMAP3_CORE1_IOPAD(0x2202, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd0 */
+ OMAP3_CORE1_IOPAD(0x2204, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_rxd1 */
+ OMAP3_CORE1_IOPAD(0x2206, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_crs_dv */
+ OMAP3_CORE1_IOPAD(0x2208, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_rxer */
+ OMAP3_CORE1_IOPAD(0x220a, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd0 */
+ OMAP3_CORE1_IOPAD(0x220c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* rmii_txd1 */
+ OMAP3_CORE1_IOPAD(0x220e, PIN_OUTPUT_PULLDOWN |MUX_MODE0) /* rmii_txen */
+ OMAP3_CORE1_IOPAD(0x2210, PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii_50mhz_clk */
+ >;
+ };
+
+ i2c2_pins: pinmux_i2c2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_scl */
+ OMAP3_CORE1_IOPAD(0x21c0, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c2_sda */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
leds_pins: pinmux_leds_pins {
pinctrl-single,pins = <
@@ -299,8 +336,6 @@
};
&omap3_pmx_core2 {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb1_pins>;
hsusb1_pins: pinmux_hsusb1_pins {
pinctrl-single,pins = <
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi
index 8b669e2eafec..f7b680f6c48a 100644
--- a/arch/arm/boot/dts/am3517-som.dtsi
+++ b/arch/arm/boot/dts/am3517-som.dtsi
@@ -69,6 +69,8 @@
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
clock-frequency = <400000>;
s35390a: s35390a@30 {
@@ -179,6 +181,13 @@
&omap3_pmx_core {
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
index bda22700110c..287566e09a67 100644
--- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi
@@ -217,6 +217,12 @@
wm8731: wm8731@1b {
compatible = "wm8731";
reg = <0x1b>;
+
+ /* PCK0 at 12MHz */
+ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+ clock-names = "mclk";
+ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
+ assigned-clock-rates = <12000000>;
};
};
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 7c4ad541c3f5..b165bd6ea53b 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -314,6 +314,8 @@
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <®_module_3v3_audio>;
VDDIO-supply = <®_module_3v3>;
@@ -543,8 +545,6 @@
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
- /* SGTL5000 sys_mclk */
- MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
>;
};
@@ -810,6 +810,12 @@
>;
};
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__CCM_CLKO1 0x130b0
+ >;
+ };
+
pinctrl_spdif: spdifgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
diff --git a/arch/arm/boot/dts/imx6ull-colibri.dtsi b/arch/arm/boot/dts/imx6ull-colibri.dtsi
index d56728f03c35..c83323b9ea53 100644
--- a/arch/arm/boot/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri.dtsi
@@ -37,7 +37,7 @@
reg_sd1_vmmc: regulator-sd1-vmmc {
compatible = "regulator-gpio";
- gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+ gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_snvs_reg_sd>;
regulator-always-on;
diff --git a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
index f7a841a28865..270e4986b6e6 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-35xx-devkit.dts
@@ -11,3 +11,18 @@
model = "LogicPD Zoom OMAP35xx SOM-LV Development Kit";
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3";
};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_2_pins>;
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3430_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3430_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3430_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3430_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3430_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3430_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
index a604d92221a4..c757f0d7781c 100644
--- a/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
+++ b/arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts
@@ -11,3 +11,18 @@
model = "LogicPD Zoom DM3730 SOM-LV Development Kit";
compatible = "logicpd,dm3730-som-lv-devkit", "ti,omap3630", "ti,omap3";
};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsusb2_2_pins>;
+ hsusb2_2_pins: pinmux_hsusb2_2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
+ OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
+ OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
+ >;
+ };
+};
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi
index b56524cc7fe2..55b619c99e24 100644
--- a/arch/arm/boot/dts/logicpd-som-lv.dtsi
+++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi
@@ -265,21 +265,6 @@
};
};
-&omap3_pmx_core2 {
- pinctrl-names = "default";
- pinctrl-0 = <&hsusb2_2_pins>;
- hsusb2_2_pins: pinmux_hsusb2_2_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25f0, PIN_OUTPUT | MUX_MODE3) /* etk_d10.hsusb2_clk */
- OMAP3630_CORE2_IOPAD(0x25f2, PIN_OUTPUT | MUX_MODE3) /* etk_d11.hsusb2_stp */
- OMAP3630_CORE2_IOPAD(0x25f4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d12.hsusb2_dir */
- OMAP3630_CORE2_IOPAD(0x25f6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d13.hsusb2_nxt */
- OMAP3630_CORE2_IOPAD(0x25f8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d14.hsusb2_data0 */
- OMAP3630_CORE2_IOPAD(0x25fa, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d15.hsusb2_data1 */
- >;
- };
-};
-
&uart2 {
interrupts-extended = <&intc 73 &omap3_pmx_core OMAP3_UART2_RX>;
pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 186b2af7743e..089e9f1f442b 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -31,6 +31,8 @@
aliases {
display0 = &lcd;
display1 = &tv0;
+ /delete-property/ mmc2;
+ /delete-property/ mmc3;
};
ldo_3v3: fixedregulator {
diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c
index 5c3845730dbf..0b80f8bcd304 100644
--- a/arch/arm/mach-omap2/omap4-common.c
+++ b/arch/arm/mach-omap2/omap4-common.c
@@ -314,10 +314,12 @@ void __init omap_gic_of_init(void)
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-gic");
gic_dist_base_addr = of_iomap(np, 0);
+ of_node_put(np);
WARN_ON(!gic_dist_base_addr);
np = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-twd-timer");
twd_base = of_iomap(np, 0);
+ of_node_put(np);
WARN_ON(!twd_base);
skip_errata_init:
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
index d61f43052a34..8e9ad1e51d66 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-a311d.dtsi
@@ -11,26 +11,6 @@
compatible = "operating-points-v2";
opp-shared;
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <731000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <731000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <731000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <731000>;
- };
-
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <761000>;
@@ -71,26 +51,6 @@
compatible = "operating-points-v2";
opp-shared;
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <731000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <731000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <731000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <731000>;
- };
-
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
index 046cc332d07f..f2543da63c39 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-s922x.dtsi
@@ -11,26 +11,6 @@
compatible = "operating-points-v2";
opp-shared;
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <731000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <731000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <731000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <731000>;
- };
-
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <731000>;
@@ -71,26 +51,6 @@
compatible = "operating-points-v2";
opp-shared;
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <751000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <751000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <751000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <667000000>;
- opp-microvolt = <751000>;
- };
-
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <771000>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 8ba3555ca369..dd62a608c805 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -55,26 +55,6 @@
compatible = "operating-points-v2";
opp-shared;
- opp-100000000 {
- opp-hz = /bits/ 64 <100000000>;
- opp-microvolt = <730000>;
- };
-
- opp-250000000 {
- opp-hz = /bits/ 64 <250000000>;
- opp-microvolt = <730000>;
- };
-
- opp-500000000 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <730000>;
- };
-
- opp-667000000 {
- opp-hz = /bits/ 64 <666666666>;
- opp-microvolt = <750000>;
- };
-
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
opp-microvolt = <770000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 9ad1d43b8ce7..4fa39654b695 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -213,6 +213,10 @@
interrupts = <3 GPIO_ACTIVE_LOW>;
rohm,reset-snvs-powered;
+ #clock-cells = <0>;
+ clocks = <&osc_32k 0>;
+ clock-output-names = "clk-32k-out";
+
regulators {
buck1_reg: BUCK1 {
regulator-name = "BUCK1";
diff --git a/arch/x86/include/asm/microcode.h b/arch/x86/include/asm/microcode.h
index 2b7cc5397f80..91a06cef50c1 100644
--- a/arch/x86/include/asm/microcode.h
+++ b/arch/x86/include/asm/microcode.h
@@ -133,11 +133,13 @@ extern void load_ucode_ap(void);
void reload_early_microcode(void);
extern bool get_builtin_firmware(struct cpio_data *cd, const char *name);
extern bool initrd_gone;
+void microcode_bsp_resume(void);
#else
static inline int __init microcode_init(void) { return 0; };
static inline void __init load_ucode_bsp(void) { }
static inline void load_ucode_ap(void) { }
static inline void reload_early_microcode(void) { }
+static inline void microcode_bsp_resume(void) { }
static inline bool
get_builtin_firmware(struct cpio_data *cd, const char *name) { return false; }
#endif
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index 4a4198b806b4..c95a27513a30 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -772,9 +772,9 @@ static struct subsys_interface mc_cpu_interface = {
};
/**
- * mc_bp_resume - Update boot CPU microcode during resume.
+ * microcode_bsp_resume - Update boot CPU microcode during resume.
*/
-static void mc_bp_resume(void)
+void microcode_bsp_resume(void)
{
int cpu = smp_processor_id();
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
@@ -786,7 +786,7 @@ static void mc_bp_resume(void)
}
static struct syscore_ops mc_syscore_ops = {
- .resume = mc_bp_resume,
+ .resume = microcode_bsp_resume,
};
static int mc_cpu_starting(unsigned int cpu)
diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c
index 1847e993ac63..f3f7f4cb15a6 100644
--- a/arch/x86/lib/usercopy_64.c
+++ b/arch/x86/lib/usercopy_64.c
@@ -142,7 +142,7 @@ void __memcpy_flushcache(void *_dst, const void *_src, size_t size)
/* cache copy and flush to align dest */
if (!IS_ALIGNED(dest, 8)) {
- unsigned len = min_t(unsigned, size, ALIGN(dest, 8) - dest);
+ size_t len = min_t(size_t, size, ALIGN(dest, 8) - dest);
memcpy((void *) dest, (void *) source, len);
clean_cache_range((void *) dest, len);
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 1bff0f68f027..20dd7023132f 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -25,6 +25,7 @@
#include <asm/cpu.h>
#include <asm/mmu_context.h>
#include <asm/cpu_device_id.h>
+#include <asm/microcode.h>
#ifdef CONFIG_X86_32
__visible unsigned long saved_context_ebx;
@@ -263,6 +264,13 @@ static void notrace __restore_processor_state(struct saved_context *ctxt)
x86_platform.restore_sched_clock_state();
mtrr_bp_restore();
perf_restore_debug_store();
+
+ microcode_bsp_resume();
+
+ /*
+ * This needs to happen after the microcode has been updated upon resume
+ * because some of the MSRs are "emulated" in microcode.
+ */
msr_restore_context(ctxt);
}
diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index d5f64018044b..503404f3280e 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -457,7 +457,7 @@ void update_siblings_masks(unsigned int cpuid)
for_each_online_cpu(cpu) {
cpu_topo = &cpu_topology[cpu];
- if (cpuid_topo->llc_id == cpu_topo->llc_id) {
+ if (cpu_topo->llc_id != -1 && cpuid_topo->llc_id == cpu_topo->llc_id) {
cpumask_set_cpu(cpu, &cpuid_topo->llc_sibling);
cpumask_set_cpu(cpuid, &cpu_topo->llc_sibling);
}
diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig
index 9f6782329a23..8a08cbb958d1 100644
--- a/drivers/block/Kconfig
+++ b/drivers/block/Kconfig
@@ -39,6 +39,22 @@ config BLK_DEV_FD
To compile this driver as a module, choose M here: the
module will be called floppy.
+config BLK_DEV_FD_RAWCMD
+ bool "Support for raw floppy disk commands (DEPRECATED)"
+ depends on BLK_DEV_FD
+ help
+ If you want to use actual physical floppies and expect to do
+ special low-level hardware accesses to them (access and use
+ non-standard formats, for example), then enable this.
+
+ Note that the code enabled by this option is rarely used and
+ might be unstable or insecure, and distros should not enable it.
+
+ Note: FDRAWCMD is deprecated and will be removed from the kernel
+ in the near future.
+
+ If unsure, say N.
+
config AMIGA_FLOPPY
tristate "Amiga floppy support"
depends on AMIGA
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c
index 02af4f109e59..f24e3791e840 100644
--- a/drivers/block/floppy.c
+++ b/drivers/block/floppy.c
@@ -3012,6 +3012,8 @@ static const char *drive_name(int type, int drive)
return "(null)";
}
+#ifdef CONFIG_BLK_DEV_FD_RAWCMD
+
/* raw commands */
static void raw_cmd_done(int flag)
{
@@ -3223,6 +3225,35 @@ static int raw_cmd_ioctl(int cmd, void __user *param)
return ret;
}
+static int floppy_raw_cmd_ioctl(int type, int drive, int cmd,
+ void __user *param)
+{
+ int ret;
+
+ pr_warn_once("Note: FDRAWCMD is deprecated and will be removed from the kernel in the near future.\n");
+
+ if (type)
+ return -EINVAL;
+ if (lock_fdc(drive))
+ return -EINTR;
+ set_floppy(drive);
+ ret = raw_cmd_ioctl(cmd, param);
+ if (ret == -EINTR)
+ return -EINTR;
+ process_fd_request();
+ return ret;
+}
+
+#else /* CONFIG_BLK_DEV_FD_RAWCMD */
+
+static int floppy_raw_cmd_ioctl(int type, int drive, int cmd,
+ void __user *param)
+{
+ return -EOPNOTSUPP;
+}
+
+#endif
+
static int invalidate_drive(struct block_device *bdev)
{
/* invalidate the buffer track to force a reread */
@@ -3410,7 +3441,6 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
{
int drive = (long)bdev->bd_disk->private_data;
int type = ITYPE(UDRS->fd_device);
- int i;
int ret;
int size;
union inparam {
@@ -3561,16 +3591,7 @@ static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned int
outparam = UDRWE;
break;
case FDRAWCMD:
- if (type)
- return -EINVAL;
- if (lock_fdc(drive))
- return -EINTR;
- set_floppy(drive);
- i = raw_cmd_ioctl(cmd, (void __user *)param);
- if (i == -EINTR)
- return -EINTR;
- process_fd_request();
- return i;
+ return floppy_raw_cmd_ioctl(type, drive, cmd, (void __user *)param);
case FDTWADDLE:
if (lock_fdc(drive))
return -EINTR;
diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c
index 1bb00a959c67..9b1a5e62417c 100644
--- a/drivers/bus/sunxi-rsb.c
+++ b/drivers/bus/sunxi-rsb.c
@@ -224,6 +224,8 @@ static struct sunxi_rsb_device *sunxi_rsb_device_create(struct sunxi_rsb *rsb,
dev_dbg(&rdev->dev, "device %s registered\n", dev_name(&rdev->dev));
+ return rdev;
+
err_device_add:
put_device(&rdev->dev);
diff --git a/drivers/clk/sunxi/clk-sun9i-mmc.c b/drivers/clk/sunxi/clk-sun9i-mmc.c
index 542b31d6e96d..636bcf2439ef 100644
--- a/drivers/clk/sunxi/clk-sun9i-mmc.c
+++ b/drivers/clk/sunxi/clk-sun9i-mmc.c
@@ -109,6 +109,8 @@ static int sun9i_a80_mmc_config_clk_probe(struct platform_device *pdev)
spin_lock_init(&data->lock);
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r)
+ return -EINVAL;
/* one clock/reset pair per word */
count = DIV_ROUND_UP((resource_size(r)), SUN9I_MMC_WIDTH);
data->membase = devm_ioremap_resource(&pdev->dev, r);
diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
index 2deed8d8773f..75e1bf3a08f7 100644
--- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
@@ -98,8 +98,10 @@ static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
return -ENOMEM;
ret = sun50i_cpufreq_get_efuse(&speed);
- if (ret)
+ if (ret) {
+ kfree(opp_tables);
return ret;
+ }
snprintf(name, MAX_NAME_LEN, "speed%d", speed);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
index 11a4c4029a90..acc2c307c871 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn21/dcn21_resource.c
@@ -1140,6 +1140,7 @@ static struct clock_source *dcn21_clock_source_create(
return &clk_src->base;
}
+ kfree(clk_src);
BREAK_TO_DEBUGGER();
return NULL;
}
diff --git a/drivers/iio/dac/ad5446.c b/drivers/iio/dac/ad5446.c
index 1f55cd8abb55..5fbda0431d6a 100644
--- a/drivers/iio/dac/ad5446.c
+++ b/drivers/iio/dac/ad5446.c
@@ -170,7 +170,7 @@ static int ad5446_read_raw(struct iio_dev *indio_dev,
switch (m) {
case IIO_CHAN_INFO_RAW:
- *val = st->cached_val;
+ *val = st->cached_val >> chan->scan_type.shift;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = st->vref_mv;
diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c
index 424922cad1e3..87a51a85a642 100644
--- a/drivers/iio/dac/ad5592r-base.c
+++ b/drivers/iio/dac/ad5592r-base.c
@@ -530,7 +530,7 @@ static int ad5592r_alloc_channels(struct ad5592r_state *st)
if (!ret)
st->channel_modes[reg] = tmp;
- fwnode_property_read_u32(child, "adi,off-state", &tmp);
+ ret = fwnode_property_read_u32(child, "adi,off-state", &tmp);
if (!ret)
st->channel_offstate[reg] = tmp;
}
diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c
index 82af903a765b..c54eed3f4edc 100644
--- a/drivers/iio/magnetometer/ak8975.c
+++ b/drivers/iio/magnetometer/ak8975.c
@@ -391,6 +391,7 @@ static int ak8975_power_on(const struct ak8975_data *data)
if (ret) {
dev_warn(&data->client->dev,
"Failed to enable specified Vid supply\n");
+ regulator_disable(data->vdd);
return ret;
}
/*
diff --git a/drivers/lightnvm/Kconfig b/drivers/lightnvm/Kconfig
index 4c2ce210c123..95b09148167e 100644
--- a/drivers/lightnvm/Kconfig
+++ b/drivers/lightnvm/Kconfig
@@ -5,7 +5,7 @@
menuconfig NVM
bool "Open-Channel SSD target support"
- depends on BLOCK
+ depends on BLOCK && BROKEN
help
Say Y here to get to enable Open-channel SSDs.
diff --git a/drivers/mtd/nand/raw/mtk_ecc.c b/drivers/mtd/nand/raw/mtk_ecc.c
index 74595b644b7c..57fa7807cd7d 100644
--- a/drivers/mtd/nand/raw/mtk_ecc.c
+++ b/drivers/mtd/nand/raw/mtk_ecc.c
@@ -43,6 +43,7 @@
struct mtk_ecc_caps {
u32 err_mask;
+ u32 err_shift;
const u8 *ecc_strength;
const u32 *ecc_regs;
u8 num_ecc_strength;
@@ -76,7 +77,7 @@ static const u8 ecc_strength_mt2712[] = {
};
static const u8 ecc_strength_mt7622[] = {
- 4, 6, 8, 10, 12, 14, 16
+ 4, 6, 8, 10, 12
};
enum mtk_ecc_regs {
@@ -221,7 +222,7 @@ void mtk_ecc_get_stats(struct mtk_ecc *ecc, struct mtk_ecc_stats *stats,
for (i = 0; i < sectors; i++) {
offset = (i >> 2) << 2;
err = readl(ecc->regs + ECC_DECENUM0 + offset);
- err = err >> ((i % 4) * 8);
+ err = err >> ((i % 4) * ecc->caps->err_shift);
err &= ecc->caps->err_mask;
if (err == ecc->caps->err_mask) {
/* uncorrectable errors */
@@ -449,6 +450,7 @@ EXPORT_SYMBOL(mtk_ecc_get_parity_bits);
static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
.err_mask = 0x3f,
+ .err_shift = 8,
.ecc_strength = ecc_strength_mt2701,
.ecc_regs = mt2701_ecc_regs,
.num_ecc_strength = 20,
@@ -459,6 +461,7 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2701 = {
static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
.err_mask = 0x7f,
+ .err_shift = 8,
.ecc_strength = ecc_strength_mt2712,
.ecc_regs = mt2712_ecc_regs,
.num_ecc_strength = 23,
@@ -468,10 +471,11 @@ static const struct mtk_ecc_caps mtk_ecc_caps_mt2712 = {
};
static const struct mtk_ecc_caps mtk_ecc_caps_mt7622 = {
- .err_mask = 0x3f,
+ .err_mask = 0x1f,
+ .err_shift = 5,
.ecc_strength = ecc_strength_mt7622,
.ecc_regs = mt7622_ecc_regs,
- .num_ecc_strength = 7,
+ .num_ecc_strength = 5,
.ecc_mode_shift = 4,
.parity_bits = 13,
.pg_irq_sel = 0,
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index e509c93737c4..f0e2f2d65282 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -384,7 +384,8 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
dma_addr_t dma_addr;
dma_cookie_t cookie;
uint32_t reg;
- int ret;
+ int ret = 0;
+ unsigned long time_left;
if (dir == DMA_FROM_DEVICE) {
chan = flctl->chan_fifo0_rx;
@@ -425,13 +426,14 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
goto out;
}
- ret =
+ time_left =
wait_for_completion_timeout(&flctl->dma_complete,
msecs_to_jiffies(3000));
- if (ret <= 0) {
+ if (time_left == 0) {
dmaengine_terminate_all(chan);
dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
+ ret = -ETIMEDOUT;
}
out:
@@ -441,7 +443,7 @@ static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
dma_unmap_single(chan->device->dev, dma_addr, len, dir);
- /* ret > 0 is success */
+ /* ret == 0 is success */
return ret;
}
@@ -465,7 +467,7 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
/* initiate DMA transfer */
if (flctl->chan_fifo0_rx && rlen >= 32 &&
- flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE) > 0)
+ !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_FROM_DEVICE))
goto convert; /* DMA success */
/* do polling transfer */
@@ -524,7 +526,7 @@ static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
/* initiate DMA transfer */
if (flctl->chan_fifo0_tx && rlen >= 32 &&
- flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE) > 0)
+ !flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_TO_DEVICE))
return; /* DMA success */
/* do polling transfer */
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 60e36f46f8ab..0c191d395f8f 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -1607,9 +1607,6 @@ static void gswip_phylink_mac_config(struct dsa_switch *ds, int port,
break;
case PHY_INTERFACE_MODE_RMII:
miicfg |= GSWIP_MII_CFG_MODE_RMIIM;
-
- /* Configure the RMII clock as output: */
- miicfg |= GSWIP_MII_CFG_RMII_CLK;
break;
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index cff64e43bdd8..b5f58c62e7d2 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -14267,10 +14267,6 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp)
/* Stop Tx */
bnx2x_tx_disable(bp);
- /* Delete all NAPI objects */
- bnx2x_del_all_napi(bp);
- if (CNIC_LOADED(bp))
- bnx2x_del_all_napi_cnic(bp);
netdev_reset_tc(bp->dev);
del_timer_sync(&bp->timer);
@@ -14375,6 +14371,11 @@ static pci_ers_result_t bnx2x_io_slot_reset(struct pci_dev *pdev)
bnx2x_drain_tx_queues(bp);
bnx2x_send_unload_req(bp, UNLOAD_RECOVERY);
bnx2x_netif_stop(bp, 1);
+ bnx2x_del_all_napi(bp);
+
+ if (CNIC_LOADED(bp))
+ bnx2x_del_all_napi_cnic(bp);
+
bnx2x_free_irq(bp);
/* Report UNLOAD_DONE to MCP */
diff --git a/drivers/net/ethernet/broadcom/genet/bcmgenet.c b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
index 2affdddc12bf..e03e2bfcc6a1 100644
--- a/drivers/net/ethernet/broadcom/genet/bcmgenet.c
+++ b/drivers/net/ethernet/broadcom/genet/bcmgenet.c
@@ -1547,6 +1547,11 @@ static struct sk_buff *bcmgenet_put_tx_csum(struct net_device *dev,
return skb;
}
+static void bcmgenet_hide_tsb(struct sk_buff *skb)
+{
+ __skb_pull(skb, sizeof(struct status_64));
+}
+
static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
@@ -1655,6 +1660,8 @@ static netdev_tx_t bcmgenet_xmit(struct sk_buff *skb, struct net_device *dev)
}
GENET_CB(skb)->last_cb = tx_cb_ptr;
+
+ bcmgenet_hide_tsb(skb);
skb_tx_timestamp(skb);
/* Decrement total BD count and advance our write pointer */
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
index 23a706a1765a..410a9bf7bf0a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_mbx.c
@@ -64,6 +64,13 @@ static int hclge_send_mbx_msg(struct hclge_vport *vport, u8 *msg, u16 msg_len,
enum hclge_cmd_status status;
struct hclge_desc desc;
+ if (msg_len > HCLGE_MBX_MAX_MSG_SIZE) {
+ dev_err(&hdev->pdev->dev,
+ "msg data length(=%u) exceeds maximum(=%u)\n",
+ msg_len, HCLGE_MBX_MAX_MSG_SIZE);
+ return -EMSGSIZE;
+ }
+
resp_pf_to_vf = (struct hclge_mbx_pf_to_vf_cmd *)desc.data;
hclge_cmd_setup_basic_desc(&desc, HCLGEVF_OPC_MBX_PF_TO_VF, false);
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
index b14b164c9601..5799b434165e 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
@@ -903,7 +903,8 @@ int ixgbe_ipsec_vf_add_sa(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf)
/* Tx IPsec offload doesn't seem to work on this
* device, so block these requests for now.
*/
- if (!(sam->flags & XFRM_OFFLOAD_INBOUND)) {
+ sam->flags = sam->flags & ~XFRM_OFFLOAD_IPV6;
+ if (sam->flags != XFRM_OFFLOAD_INBOUND) {
err = -EOPNOTSUPP;
goto err_out;
}
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
index 72e47621d27c..934c34e98d55 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c
@@ -65,8 +65,9 @@ static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed)
struct phy_device *phy_dev = ndev->phydev;
u32 val;
- writew(SGMII_ADAPTER_DISABLE,
- sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
+ if (sgmii_adapter_base)
+ writew(SGMII_ADAPTER_DISABLE,
+ sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
if (splitter_base) {
val = readl(splitter_base + EMAC_SPLITTER_CTRL_REG);
@@ -88,10 +89,11 @@ static void socfpga_dwmac_fix_mac_speed(void *priv, unsigned int speed)
writel(val, splitter_base + EMAC_SPLITTER_CTRL_REG);
}
- writew(SGMII_ADAPTER_ENABLE,
- sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
- if (phy_dev)
+ if (phy_dev && sgmii_adapter_base) {
+ writew(SGMII_ADAPTER_ENABLE,
+ sgmii_adapter_base + SGMII_ADAPTER_CTRL_REG);
tse_pcs_fix_mac_speed(&dwmac->pcs, phy_dev, speed);
+ }
}
static int socfpga_dwmac_parse_data(struct socfpga_dwmac *dwmac, struct device *dev)
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index 02d6f3ad9aca..83dc1c2c3b84 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -311,7 +311,6 @@ static void sp_setup(struct net_device *dev)
{
/* Finish setting up the DEVICE info. */
dev->netdev_ops = &sp_netdev_ops;
- dev->needs_free_netdev = true;
dev->mtu = SIXP_MTU;
dev->hard_header_len = AX25_MAX_HEADER_LEN;
dev->header_ops = &ax25_header_ops;
@@ -679,9 +678,11 @@ static void sixpack_close(struct tty_struct *tty)
del_timer_sync(&sp->tx_t);
del_timer_sync(&sp->resync_t);
- /* Free all 6pack frame buffers. */
+ /* Free all 6pack frame buffers after unreg. */
kfree(sp->rbuff);
kfree(sp->xbuff);
+
+ free_netdev(sp->dev);
}
/* Perform I/O control on an active 6pack channel. */
diff --git a/drivers/net/hippi/rrunner.c b/drivers/net/hippi/rrunner.c
index a4b3fce69ecd..6016e182f008 100644
--- a/drivers/net/hippi/rrunner.c
+++ b/drivers/net/hippi/rrunner.c
@@ -1346,7 +1346,9 @@ static int rr_close(struct net_device *dev)
rrpriv->fw_running = 0;
+ spin_unlock_irqrestore(&rrpriv->lock, flags);
del_timer_sync(&rrpriv->timer);
+ spin_lock_irqsave(&rrpriv->lock, flags);
writel(0, ®s->TxPi);
writel(0, ®s->IpRxPi);
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index 94a34cf75eb3..39d13f7e4cf3 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -628,7 +628,8 @@ static int phy_mdm6600_probe(struct platform_device *pdev)
cleanup:
if (error < 0)
phy_mdm6600_device_power_off(ddata);
-
+ pm_runtime_disable(ddata->dev);
+ pm_runtime_dont_use_autosuspend(ddata->dev);
return error;
}
diff --git a/drivers/phy/samsung/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
index 4dd7324d91b2..ea46576404b8 100644
--- a/drivers/phy/samsung/phy-exynos5250-sata.c
+++ b/drivers/phy/samsung/phy-exynos5250-sata.c
@@ -190,6 +190,7 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
return -EINVAL;
sata_phy->client = of_find_i2c_device_by_node(node);
+ of_node_put(node);
if (!sata_phy->client)
return -EPROBE_DEFER;
@@ -198,20 +199,21 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl");
if (IS_ERR(sata_phy->phyclk)) {
dev_err(dev, "failed to get clk for PHY\n");
- return PTR_ERR(sata_phy->phyclk);
+ ret = PTR_ERR(sata_phy->phyclk);
+ goto put_dev;
}
ret = clk_prepare_enable(sata_phy->phyclk);
if (ret < 0) {
dev_err(dev, "failed to enable source clk\n");
- return ret;
+ goto put_dev;
}
sata_phy->phy = devm_phy_create(dev, NULL, &exynos_sata_phy_ops);
if (IS_ERR(sata_phy->phy)) {
- clk_disable_unprepare(sata_phy->phyclk);
dev_err(dev, "failed to create PHY\n");
- return PTR_ERR(sata_phy->phy);
+ ret = PTR_ERR(sata_phy->phy);
+ goto clk_disable;
}
phy_set_drvdata(sata_phy->phy, sata_phy);
@@ -219,11 +221,18 @@ static int exynos_sata_phy_probe(struct platform_device *pdev)
phy_provider = devm_of_phy_provider_register(dev,
of_phy_simple_xlate);
if (IS_ERR(phy_provider)) {
- clk_disable_unprepare(sata_phy->phyclk);
- return PTR_ERR(phy_provider);
+ ret = PTR_ERR(phy_provider);
+ goto clk_disable;
}
return 0;
+
+clk_disable:
+ clk_disable_unprepare(sata_phy->phyclk);
+put_dev:
+ put_device(&sata_phy->client->dev);
+
+ return ret;
}
static const struct of_device_id exynos_sata_phy_of_match[] = {
diff --git a/drivers/phy/ti/phy-am654-serdes.c b/drivers/phy/ti/phy-am654-serdes.c
index 6ef12017ff4e..96e3426f9293 100644
--- a/drivers/phy/ti/phy-am654-serdes.c
+++ b/drivers/phy/ti/phy-am654-serdes.c
@@ -641,7 +641,7 @@ static int serdes_am654_probe(struct platform_device *pdev)
clk_err:
of_clk_del_provider(node);
-
+ pm_runtime_disable(dev);
return ret;
}
diff --git a/drivers/phy/ti/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c
index 3d74629d7423..471fe2e80f4e 100644
--- a/drivers/phy/ti/phy-omap-usb2.c
+++ b/drivers/phy/ti/phy-omap-usb2.c
@@ -157,7 +157,7 @@ static int omap_usb2_enable_clocks(struct omap_usb *phy)
return 0;
err1:
- clk_disable(phy->wkupclk);
+ clk_disable_unprepare(phy->wkupclk);
err0:
return ret;
diff --git a/drivers/pinctrl/pinctrl-pistachio.c b/drivers/pinctrl/pinctrl-pistachio.c
index 379e9a6a6d89..5f381e4c7577 100644
--- a/drivers/pinctrl/pinctrl-pistachio.c
+++ b/drivers/pinctrl/pinctrl-pistachio.c
@@ -1370,10 +1370,10 @@ static int pistachio_gpio_register(struct pistachio_pinctrl *pctl)
}
irq = irq_of_parse_and_map(child, 0);
- if (irq < 0) {
- dev_err(pctl->dev, "No IRQ for bank %u: %d\n", i, irq);
+ if (!irq) {
+ dev_err(pctl->dev, "No IRQ for bank %u\n", i);
of_node_put(child);
- ret = irq;
+ ret = -EINVAL;
goto err;
}
diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c
index f4fe73ce5710..c38f06139ccf 100644
--- a/drivers/tty/n_gsm.c
+++ b/drivers/tty/n_gsm.c
@@ -72,6 +72,8 @@ module_param(debug, int, 0600);
*/
#define MAX_MRU 1500
#define MAX_MTU 1500
+/* SOF, ADDR, CTRL, LEN1, LEN2, ..., FCS, EOF */
+#define PROT_OVERHEAD 7
#define GSM_NET_TX_TIMEOUT (HZ*10)
/**
@@ -823,7 +825,7 @@ static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
break;
case 2: /* Unstructed with modem bits.
Always one byte as we never send inline break data */
- *dp++ = gsm_encode_modem(dlci);
+ *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
break;
}
WARN_ON(kfifo_out_locked(dlci->fifo, dp , len, &dlci->lock) != len);
@@ -1300,11 +1302,12 @@ static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
{
- struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 1, gsm->ftype);
+ struct gsm_msg *msg = gsm_data_alloc(gsm, 0, ctrl->len + 2, gsm->ftype);
if (msg == NULL)
return;
- msg->data[0] = (ctrl->cmd << 1) | 2 | EA; /* command */
- memcpy(msg->data + 1, ctrl->data, ctrl->len);
+ msg->data[0] = (ctrl->cmd << 1) | CR | EA; /* command */
+ msg->data[1] = (ctrl->len << 1) | EA;
+ memcpy(msg->data + 2, ctrl->data, ctrl->len);
gsm_data_queue(gsm->dlci[0], msg);
}
@@ -1327,7 +1330,6 @@ static void gsm_control_retransmit(struct timer_list *t)
spin_lock_irqsave(&gsm->control_lock, flags);
ctrl = gsm->pending_cmd;
if (ctrl) {
- gsm->cretries--;
if (gsm->cretries == 0) {
gsm->pending_cmd = NULL;
ctrl->error = -ETIMEDOUT;
@@ -1336,6 +1338,7 @@ static void gsm_control_retransmit(struct timer_list *t)
wake_up(&gsm->event);
return;
}
+ gsm->cretries--;
gsm_control_transmit(gsm, ctrl);
mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
}
@@ -1376,7 +1379,7 @@ static struct gsm_control *gsm_control_send(struct gsm_mux *gsm,
/* If DLCI0 is in ADM mode skip retries, it won't respond */
if (gsm->dlci[0]->mode == DLCI_MODE_ADM)
- gsm->cretries = 1;
+ gsm->cretries = 0;
else
gsm->cretries = gsm->n2;
@@ -1810,7 +1813,6 @@ static void gsm_queue(struct gsm_mux *gsm)
gsm_response(gsm, address, UA);
gsm_dlci_close(dlci);
break;
- case UA:
case UA|PF:
if (cr == 0 || dlci == NULL)
break;
@@ -1961,7 +1963,8 @@ static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
}
/* Any partial frame was a runt so go back to start */
if (gsm->state != GSM_START) {
- gsm->malformed++;
+ if (gsm->state != GSM_SEARCH)
+ gsm->malformed++;
gsm->state = GSM_START;
}
/* A SOF in GSM_START means we are still reading idling or
@@ -2098,6 +2101,7 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm)
gsm_dlci_release(gsm->dlci[i]);
mutex_unlock(&gsm->mutex);
/* Now wipe the queues */
+ tty_ldisc_flush(gsm->tty);
list_for_each_entry_safe(txq, ntxq, &gsm->tx_list, list)
kfree(txq);
INIT_LIST_HEAD(&gsm->tx_list);
@@ -2208,7 +2212,7 @@ static struct gsm_mux *gsm_alloc_mux(void)
kfree(gsm);
return NULL;
}
- gsm->txframe = kmalloc(2 * MAX_MRU + 2, GFP_KERNEL);
+ gsm->txframe = kmalloc(2 * (MAX_MTU + PROT_OVERHEAD - 1), GFP_KERNEL);
if (gsm->txframe == NULL) {
kfree(gsm->buf);
kfree(gsm);
@@ -2264,7 +2268,7 @@ static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
/* Check the MRU/MTU range looks sane */
if (c->mru > MAX_MRU || c->mtu > MAX_MTU || c->mru < 8 || c->mtu < 8)
return -EINVAL;
- if (c->n2 < 3)
+ if (c->n2 > 255)
return -EINVAL;
if (c->encapsulation > 1) /* Basic, advanced, no I */
return -EINVAL;
@@ -2879,19 +2883,17 @@ static struct tty_ldisc_ops tty_ldisc_packet = {
static int gsmtty_modem_update(struct gsm_dlci *dlci, u8 brk)
{
- u8 modembits[5];
+ u8 modembits[3];
struct gsm_control *ctrl;
int len = 2;
- if (brk)
+ modembits[0] = (dlci->addr << 2) | 2 | EA; /* DLCI, Valid, EA */
+ modembits[1] = (gsm_encode_modem(dlci) << 1) | EA;
+ if (brk) {
+ modembits[2] = (brk << 4) | 2 | EA; /* Length, Break, EA */
len++;
-
- modembits[0] = len << 1 | EA; /* Data bytes */
- modembits[1] = dlci->addr << 2 | 3; /* DLCI, EA, 1 */
- modembits[2] = gsm_encode_modem(dlci) << 1 | EA;
- if (brk)
- modembits[3] = brk << 4 | 2 | EA; /* Valid, EA */
- ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len + 1);
+ }
+ ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len);
if (ctrl == NULL)
return -ENOMEM;
return gsm_control_wait(dlci->gsm, ctrl);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index fd443bc4c298..92e2ee278523 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2907,7 +2907,7 @@ enum pci_board_num_t {
pbn_panacom2,
pbn_panacom4,
pbn_plx_romulus,
- pbn_endrun_2_4000000,
+ pbn_endrun_2_3906250,
pbn_oxsemi,
pbn_oxsemi_1_4000000,
pbn_oxsemi_2_4000000,
@@ -3434,10 +3434,10 @@ static struct pciserial_board pci_boards[] = {
* signal now many ports are available
* 2 port 952 Uart support
*/
- [pbn_endrun_2_4000000] = {
+ [pbn_endrun_2_3906250] = {
.flags = FL_BASE0,
.num_ports = 2,
- .base_baud = 4000000,
+ .base_baud = 3906250,
.uart_offset = 0x200,
.first_offset = 0x1000,
},
@@ -4345,7 +4345,7 @@ static const struct pci_device_id serial_pci_tbl[] = {
*/
{ PCI_VENDOR_ID_ENDRUN, PCI_DEVICE_ID_ENDRUN_1588,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_endrun_2_4000000 },
+ pbn_endrun_2_3906250 },
/*
* Quatech cards. These actually have configurable clocks but for
* now we just use the default.
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 87567515591e..c1891c55897a 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -3184,7 +3184,7 @@ static void serial8250_console_restore(struct uart_8250_port *up)
serial8250_set_divisor(port, baud, quot, frac);
serial_port_out(port, UART_LCR, up->lcr);
- serial8250_out_MCR(up, UART_MCR_DTR | UART_MCR_RTS);
+ serial8250_out_MCR(up, up->mcr | UART_MCR_DTR | UART_MCR_RTS);
}
/*
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index e5ed4ab2b08d..8b41a783b37e 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -1401,7 +1401,7 @@ static int imx_uart_startup(struct uart_port *port)
imx_uart_writel(sport, ucr1, UCR1);
ucr4 = imx_uart_readl(sport, UCR4) & ~UCR4_OREN;
- if (!sport->dma_is_enabled)
+ if (!dma_is_inited)
ucr4 |= UCR4_OREN;
imx_uart_writel(sport, ucr4, UCR4);
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index a118c44c70e1..d5f233fa6f3b 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -404,6 +404,9 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
USB_QUIRK_IGNORE_REMOTE_WAKEUP },
+ /* Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader)*/
+ { USB_DEVICE(0x0bda, 0x0151), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* Realtek hub in Dell WD19 (Type-C) */
{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
{ USB_DEVICE(0x0bda, 0x5487), .driver_info = USB_QUIRK_RESET_RESUME },
@@ -508,6 +511,9 @@ static const struct usb_device_id usb_quirk_list[] = {
/* DJI CineSSD */
{ USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
+ /* VCOM device */
+ { USB_DEVICE(0x4296, 0x7570), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 2c68ec60d39a..8cc81f193e9c 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1229,10 +1229,10 @@ static void dwc3_get_properties(struct dwc3 *dwc)
u8 lpm_nyet_threshold;
u8 tx_de_emphasis;
u8 hird_threshold;
- u8 rx_thr_num_pkt_prd;
- u8 rx_max_burst_prd;
- u8 tx_thr_num_pkt_prd;
- u8 tx_max_burst_prd;
+ u8 rx_thr_num_pkt_prd = 0;
+ u8 rx_max_burst_prd = 0;
+ u8 tx_thr_num_pkt_prd = 0;
+ u8 tx_max_burst_prd = 0;
/* default to highest possible threshold */
lpm_nyet_threshold = 0xf;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index a1d8cb69d229..18a53a3dfac6 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2728,6 +2728,7 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
const struct dwc3_event_depevt *event,
struct dwc3_request *req, int status)
{
+ int request_status;
int ret;
if (req->request.num_mapped_sgs)
@@ -2757,7 +2758,35 @@ static int dwc3_gadget_ep_cleanup_completed_request(struct dwc3_ep *dep,
req->needs_extra_trb = false;
}
- dwc3_gadget_giveback(dep, req, status);
+ /*
+ * The event status only reflects the status of the TRB with IOC set.
+ * For the requests that don't set interrupt on completion, the driver
+ * needs to check and return the status of the completed TRBs associated
+ * with the request. Use the status of the last TRB of the request.
+ */
+ if (req->request.no_interrupt) {
+ struct dwc3_trb *trb;
+
+ trb = dwc3_ep_prev_trb(dep, dep->trb_dequeue);
+ switch (DWC3_TRB_SIZE_TRBSTS(trb->size)) {
+ case DWC3_TRBSTS_MISSED_ISOC:
+ /* Isoc endpoint only */
+ request_status = -EXDEV;
+ break;
+ case DWC3_TRB_STS_XFER_IN_PROG:
+ /* Applicable when End Transfer with ForceRM=0 */
+ case DWC3_TRBSTS_SETUP_PENDING:
+ /* Control endpoint only */
+ case DWC3_TRBSTS_OK:
+ default:
+ request_status = 0;
+ break;
+ }
+ } else {
+ request_status = status;
+ }
+
+ dwc3_gadget_giveback(dep, req, request_status);
out:
return ret;
diff --git a/drivers/usb/gadget/configfs.c b/drivers/usb/gadget/configfs.c
index 3d4710cc34bc..2350e97a1662 100644
--- a/drivers/usb/gadget/configfs.c
+++ b/drivers/usb/gadget/configfs.c
@@ -1412,6 +1412,8 @@ static void configfs_composite_unbind(struct usb_gadget *gadget)
usb_ep_autoconfig_reset(cdev->gadget);
spin_lock_irqsave(&gi->spinlock, flags);
cdev->gadget = NULL;
+ cdev->deactivations = 0;
+ gadget->deactivated = false;
set_gadget_data(gadget, NULL);
spin_unlock_irqrestore(&gi->spinlock, flags);
}
diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c
index 61e2c94cc0b0..cab1e30462c2 100644
--- a/drivers/usb/gadget/function/uvc_queue.c
+++ b/drivers/usb/gadget/function/uvc_queue.c
@@ -242,6 +242,8 @@ void uvcg_queue_cancel(struct uvc_video_queue *queue, int disconnect)
buf->state = UVC_BUF_STATE_ERROR;
vb2_buffer_done(&buf->buf.vb2_buf, VB2_BUF_STATE_ERROR);
}
+ queue->buf_used = 0;
+
/* This must be protected by the irqlock spinlock to avoid race
* conditions between uvc_queue_buffer and the disconnection event that
* could result in an interruptible wait in uvc_dequeue_buffer. Do not
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index db65e1ad00de..dd46c15c4853 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1343,7 +1343,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
}
spin_unlock_irqrestore(&xhci->lock, flags);
if (!wait_for_completion_timeout(&bus_state->u3exit_done[wIndex],
- msecs_to_jiffies(100)))
+ msecs_to_jiffies(500)))
xhci_dbg(xhci, "missing U0 port change event for port %d\n",
wIndex);
spin_lock_irqsave(&xhci->lock, flags);
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 7fa27b403756..6cedae902adf 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2932,6 +2932,8 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
if (event_loop++ < TRBS_PER_SEGMENT / 2)
continue;
xhci_update_erst_dequeue(xhci, event_ring_deq);
+ event_ring_deq = xhci->event_ring->dequeue;
+
event_loop = 0;
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 476dc6abd5a2..2f59d447411b 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -779,6 +779,17 @@ void xhci_shutdown(struct usb_hcd *hcd)
if (xhci->quirks & XHCI_SPURIOUS_REBOOT)
usb_disable_xhci_ports(to_pci_dev(hcd->self.sysdev));
+ /* Don't poll the roothubs after shutdown. */
+ xhci_dbg(xhci, "%s: stopping usb%d port polling.\n",
+ __func__, hcd->self.busnum);
+ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
+ del_timer_sync(&hcd->rh_timer);
+
+ if (xhci->shared_hcd) {
+ clear_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags);
+ del_timer_sync(&xhci->shared_hcd->rh_timer);
+ }
+
spin_lock_irq(&xhci->lock);
xhci_halt(xhci);
/* Workaround for spurious wakeups at shutdown with HSW */
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 748139d26263..0be8efcda15d 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -71,6 +71,7 @@ static void destroy_priv(struct kref *kref)
dev_dbg(&priv->usbdev->dev, "destroying priv datastructure\n");
usb_put_dev(priv->usbdev);
+ priv->usbdev = NULL;
kfree(priv);
}
@@ -736,7 +737,6 @@ static int uss720_probe(struct usb_interface *intf,
parport_announce_port(pp);
usb_set_intfdata(intf, pp);
- usb_put_dev(usbdev);
return 0;
probe_abort:
@@ -754,7 +754,6 @@ static void uss720_disconnect(struct usb_interface *intf)
usb_set_intfdata(intf, NULL);
if (pp) {
priv = pp->private_data;
- priv->usbdev = NULL;
priv->pp = NULL;
dev_dbg(&intf->dev, "parport_remove_port\n");
parport_remove_port(pp);
diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c
index 08e18448e8b8..db30365345e0 100644
--- a/drivers/usb/mtu3/mtu3_dr.c
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -41,10 +41,8 @@ static char *mailbox_state_string(enum mtu3_vbus_id_state state)
static void toggle_opstate(struct ssusb_mtk *ssusb)
{
- if (!ssusb->otg_switch.is_u3_drd) {
- mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
- mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
- }
+ mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
+ mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
}
/* only port0 supports dual-role mode */
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index dfa7c504befe..d5a1832aa48e 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -195,6 +195,8 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x16DC, 0x0015) }, /* W-IE-NE-R Plein & Baus GmbH CML Control, Monitoring and Data Logger */
{ USB_DEVICE(0x17A8, 0x0001) }, /* Kamstrup Optical Eye/3-wire */
{ USB_DEVICE(0x17A8, 0x0005) }, /* Kamstrup M-Bus Master MultiPort 250D */
+ { USB_DEVICE(0x17A8, 0x0101) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Int Ant) */
+ { USB_DEVICE(0x17A8, 0x0102) }, /* Kamstrup 868 MHz wM-Bus C-Mode Meter Reader (Ext Ant) */
{ USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */
{ USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 839eac04b5e3..fa978412601a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -432,6 +432,8 @@ static void option_instat_callback(struct urb *urb);
#define CINTERION_PRODUCT_CLS8 0x00b0
#define CINTERION_PRODUCT_MV31_MBIM 0x00b3
#define CINTERION_PRODUCT_MV31_RMNET 0x00b7
+#define CINTERION_PRODUCT_MV32_WA 0x00f1
+#define CINTERION_PRODUCT_MV32_WB 0x00f2
/* Olivetti products */
#define OLIVETTI_VENDOR_ID 0x0b3c
@@ -1217,6 +1219,10 @@ static const struct usb_device_id option_ids[] = {
.driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1056, 0xff), /* Telit FD980 */
.driver_info = NCTRL(2) | RSVD(3) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1057, 0xff), /* Telit FN980 */
+ .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1058, 0xff), /* Telit FN980 (PCIe) */
+ .driver_info = NCTRL(0) | RSVD(1) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1060, 0xff), /* Telit LN920 (rmnet) */
.driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1061, 0xff), /* Telit LN920 (MBIM) */
@@ -1233,6 +1239,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = NCTRL(2) | RSVD(3) },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1073, 0xff), /* Telit FN990 (ECM) */
.driver_info = NCTRL(0) | RSVD(1) },
+ { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x1075, 0xff), /* Telit FN990 (PCIe) */
+ .driver_info = RSVD(0) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = NCTRL(0) | RSVD(1) | RSVD(3) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM),
@@ -1969,6 +1977,10 @@ static const struct usb_device_id option_ids[] = {
.driver_info = RSVD(3)},
{ USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV31_RMNET, 0xff),
.driver_info = RSVD(0)},
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WA, 0xff),
+ .driver_info = RSVD(3)},
+ { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_MV32_WB, 0xff),
+ .driver_info = RSVD(3)},
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100),
.driver_info = RSVD(4) },
{ USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120),
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index ca3bd58f2025..5576cfa50bc8 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -599,9 +599,8 @@ static int firm_send_command(struct usb_serial_port *port, __u8 command,
switch (command) {
case WHITEHEAT_GET_DTR_RTS:
info = usb_get_serial_port_data(port);
- memcpy(&info->mcr, command_info->result_buffer,
- sizeof(struct whiteheat_dr_info));
- break;
+ info->mcr = command_info->result_buffer[0];
+ break;
}
}
exit:
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index f3934f2d3c44..0268e654cae6 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -748,14 +748,18 @@ ucsi_dr_swap(const struct typec_capability *cap, enum typec_data_role role)
if (ret < 0)
goto out_unlock;
+ mutex_unlock(&con->lock);
+
if (!wait_for_completion_timeout(&con->complete,
- msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
- ret = -ETIMEDOUT;
+ msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
+ return -ETIMEDOUT;
+
+ return 0;
out_unlock:
mutex_unlock(&con->lock);
- return ret < 0 ? ret : 0;
+ return ret;
}
static int
@@ -780,11 +784,13 @@ ucsi_pr_swap(const struct typec_capability *cap, enum typec_role role)
if (ret < 0)
goto out_unlock;
+ mutex_unlock(&con->lock);
+
if (!wait_for_completion_timeout(&con->complete,
- msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) {
- ret = -ETIMEDOUT;
- goto out_unlock;
- }
+ msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
+ return -ETIMEDOUT;
+
+ mutex_lock(&con->lock);
/* Something has gone wrong while swapping the role */
if (con->status.pwr_op_mode != UCSI_CONSTAT_PWR_OPMODE_PD) {
diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c
index e269b1391e14..8e8af408998e 100644
--- a/drivers/video/fbdev/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
@@ -1650,8 +1650,9 @@ static int dlfb_usb_probe(struct usb_interface *intf,
const struct device_attribute *attr;
struct dlfb_data *dlfb;
struct fb_info *info;
- int retval = -ENOMEM;
+ int retval;
struct usb_device *usbdev = interface_to_usbdev(intf);
+ struct usb_endpoint_descriptor *out;
/* usb initialization */
dlfb = kzalloc(sizeof(*dlfb), GFP_KERNEL);
@@ -1665,6 +1666,12 @@ static int dlfb_usb_probe(struct usb_interface *intf,
dlfb->udev = usb_get_dev(usbdev);
usb_set_intfdata(intf, dlfb);
+ retval = usb_find_common_endpoints(intf->cur_altsetting, NULL, &out, NULL, NULL);
+ if (retval) {
+ dev_err(&intf->dev, "Device should have at lease 1 bulk endpoint!\n");
+ goto error;
+ }
+
dev_dbg(&intf->dev, "console enable=%d\n", console);
dev_dbg(&intf->dev, "fb_defio enable=%d\n", fb_defio);
dev_dbg(&intf->dev, "shadow enable=%d\n", shadow);
@@ -1674,6 +1681,7 @@ static int dlfb_usb_probe(struct usb_interface *intf,
if (!dlfb_parse_vendor_descriptor(dlfb, intf)) {
dev_err(&intf->dev,
"firmware not recognized, incompatible device?\n");
+ retval = -ENODEV;
goto error;
}
@@ -1687,8 +1695,10 @@ static int dlfb_usb_probe(struct usb_interface *intf,
/* allocates framebuffer driver structure, not framebuffer memory */
info = framebuffer_alloc(0, &dlfb->udev->dev);
- if (!info)
+ if (!info) {
+ retval = -ENOMEM;
goto error;
+ }
dlfb->info = info;
info->par = dlfb;
diff --git a/fs/cifs/smb2ops.c b/fs/cifs/smb2ops.c
index defee1d208d2..7985fe25850b 100644
--- a/fs/cifs/smb2ops.c
+++ b/fs/cifs/smb2ops.c
@@ -1643,9 +1643,17 @@ smb2_copychunk_range(const unsigned int xid,
int chunks_copied = 0;
bool chunk_sizes_updated = false;
ssize_t bytes_written, total_bytes_written = 0;
+ struct inode *inode;
pcchunk = kmalloc(sizeof(struct copychunk_ioctl), GFP_KERNEL);
+ /*
+ * We need to flush all unwritten data before we can send the
+ * copychunk ioctl to the server.
+ */
+ inode = d_inode(trgtfile->dentry);
+ filemap_write_and_wait(inode->i_mapping);
+
if (pcchunk == NULL)
return -ENOMEM;
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 358398b1fe0c..7d039ba5ae28 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -38,6 +38,7 @@
#include <linux/uio.h>
#include <linux/uaccess.h>
+#include <linux/sched/mm.h>
static const struct super_operations hugetlbfs_ops;
static const struct address_space_operations hugetlbfs_aops;
@@ -200,6 +201,54 @@ static int hugetlbfs_file_mmap(struct file *file, struct vm_area_struct *vma)
*/
#ifndef HAVE_ARCH_HUGETLB_UNMAPPED_AREA
+static unsigned long
+hugetlb_get_unmapped_area_bottomup(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct hstate *h = hstate_file(file);
+ struct vm_unmapped_area_info info;
+
+ info.flags = 0;
+ info.length = len;
+ info.low_limit = current->mm->mmap_base;
+ info.high_limit = arch_get_mmap_end(addr);
+ info.align_mask = PAGE_MASK & ~huge_page_mask(h);
+ info.align_offset = 0;
+ return vm_unmapped_area(&info);
+}
+
+static unsigned long
+hugetlb_get_unmapped_area_topdown(struct file *file, unsigned long addr,
+ unsigned long len, unsigned long pgoff, unsigned long flags)
+{
+ struct hstate *h = hstate_file(file);
+ struct vm_unmapped_area_info info;
+
+ info.flags = VM_UNMAPPED_AREA_TOPDOWN;
+ info.length = len;
+ info.low_limit = max(PAGE_SIZE, mmap_min_addr);
+ info.high_limit = arch_get_mmap_base(addr, current->mm->mmap_base);
+ info.align_mask = PAGE_MASK & ~huge_page_mask(h);
+ info.align_offset = 0;
+ addr = vm_unmapped_area(&info);
+
+ /*
+ * A failed mmap() very likely causes application failure,
+ * so fall back to the bottom-up function here. This scenario
+ * can happen with large stack limits and large mmap()
+ * allocations.
+ */
+ if (unlikely(offset_in_page(addr))) {
+ VM_BUG_ON(addr != -ENOMEM);
+ info.flags = 0;
+ info.low_limit = current->mm->mmap_base;
+ info.high_limit = arch_get_mmap_end(addr);
+ addr = vm_unmapped_area(&info);
+ }
+
+ return addr;
+}
+
static unsigned long
hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
unsigned long len, unsigned long pgoff, unsigned long flags)
@@ -207,7 +256,7 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
struct hstate *h = hstate_file(file);
- struct vm_unmapped_area_info info;
+ const unsigned long mmap_end = arch_get_mmap_end(addr);
if (len & ~huge_page_mask(h))
return -EINVAL;
@@ -223,18 +272,21 @@ hugetlb_get_unmapped_area(struct file *file, unsigned long addr,
if (addr) {
addr = ALIGN(addr, huge_page_size(h));
vma = find_vma(mm, addr);
- if (TASK_SIZE - len >= addr &&
+ if (mmap_end - len >= addr &&
(!vma || addr + len <= vm_start_gap(vma)))
return addr;
}
- info.flags = 0;
- info.length = len;
- info.low_limit = TASK_UNMAPPED_BASE;
- info.high_limit = TASK_SIZE;
- info.align_mask = PAGE_MASK & ~huge_page_mask(h);
- info.align_offset = 0;
- return vm_unmapped_area(&info);
+ /*
+ * Use mm->get_unmapped_area value as a hint to use topdown routine.
+ * If architectures have special needs, they should define their own
+ * version of hugetlb_get_unmapped_area.
+ */
+ if (mm->get_unmapped_area == arch_get_unmapped_area_topdown)
+ return hugetlb_get_unmapped_area_topdown(file, addr, len,
+ pgoff, flags);
+ return hugetlb_get_unmapped_area_bottomup(file, addr, len,
+ pgoff, flags);
}
#endif
diff --git a/include/linux/kernel.h b/include/linux/kernel.h
index d83d403dac2e..77c86a2236da 100644
--- a/include/linux/kernel.h
+++ b/include/linux/kernel.h
@@ -627,7 +627,7 @@ static inline char *hex_byte_pack_upper(char *buf, u8 byte)
return buf;
}
-extern int hex_to_bin(char ch);
+extern int hex_to_bin(unsigned char ch);
extern int __must_check hex2bin(u8 *dst, const char *src, size_t count);
extern char *bin2hex(char *dst, const void *src, size_t count);
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 3a1d899019af..ab0da04ac9ee 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -133,6 +133,14 @@ static inline void mm_update_next_owner(struct mm_struct *mm)
#endif /* CONFIG_MEMCG */
#ifdef CONFIG_MMU
+#ifndef arch_get_mmap_end
+#define arch_get_mmap_end(addr) (TASK_SIZE)
+#endif
+
+#ifndef arch_get_mmap_base
+#define arch_get_mmap_base(addr, base) (base)
+#endif
+
extern void arch_pick_mmap_layout(struct mm_struct *mm,
struct rlimit *rlim_stack);
extern unsigned long
diff --git a/include/net/tcp.h b/include/net/tcp.h
index b914959cd2c6..9237362e5606 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -603,6 +603,7 @@ void tcp_synack_rtt_meas(struct sock *sk, struct request_sock *req);
void tcp_reset(struct sock *sk);
void tcp_skb_mark_lost_uncond_verify(struct tcp_sock *tp, struct sk_buff *skb);
void tcp_fin(struct sock *sk);
+void tcp_check_space(struct sock *sk);
/* tcp_timer.c */
void tcp_init_xmit_timers(struct sock *);
@@ -1030,6 +1031,7 @@ struct rate_sample {
int losses; /* number of packets marked lost upon ACK */
u32 acked_sacked; /* number of packets newly (S)ACKed upon ACK */
u32 prior_in_flight; /* in flight before this ACK */
+ u32 last_end_seq; /* end_seq of most recently ACKed packet */
bool is_app_limited; /* is sample from packet with bubble in pipe? */
bool is_retrans; /* is sample from retransmission? */
bool is_ack_delayed; /* is this (likely) a delayed ACK? */
@@ -1139,6 +1141,11 @@ void tcp_rate_gen(struct sock *sk, u32 delivered, u32 lost,
bool is_sack_reneg, struct rate_sample *rs);
void tcp_rate_check_app_limited(struct sock *sk);
+static inline bool tcp_skb_sent_after(u64 t1, u64 t2, u32 seq1, u32 seq2)
+{
+ return t1 > t2 || (t1 == t2 && after(seq1, seq2));
+}
+
/* These functions determine how the current flow behaves in respect of SACK
* handling. SACK is negotiated with the peer, and therefore it can vary
* between different flows.
diff --git a/lib/hexdump.c b/lib/hexdump.c
index 147133f8eb2f..c0a08ddcf94e 100644
--- a/lib/hexdump.c
+++ b/lib/hexdump.c
@@ -21,15 +21,33 @@ EXPORT_SYMBOL(hex_asc_upper);
*
* hex_to_bin() converts one hex digit to its actual value or -1 in case of bad
* input.
+ *
+ * This function is used to load cryptographic keys, so it is coded in such a
+ * way that there are no conditions or memory accesses that depend on data.
+ *
+ * Explanation of the logic:
+ * (ch - '9' - 1) is negative if ch <= '9'
+ * ('0' - 1 - ch) is negative if ch >= '0'
+ * we "and" these two values, so the result is negative if ch is in the range
+ * '0' ... '9'
+ * we are only interested in the sign, so we do a shift ">> 8"; note that right
+ * shift of a negative value is implementation-defined, so we cast the
+ * value to (unsigned) before the shift --- we have 0xffffff if ch is in
+ * the range '0' ... '9', 0 otherwise
+ * we "and" this value with (ch - '0' + 1) --- we have a value 1 ... 10 if ch is
+ * in the range '0' ... '9', 0 otherwise
+ * we add this value to -1 --- we have a value 0 ... 9 if ch is in the range '0'
+ * ... '9', -1 otherwise
+ * the next line is similar to the previous one, but we need to decode both
+ * uppercase and lowercase letters, so we use (ch & 0xdf), which converts
+ * lowercase to uppercase
*/
-int hex_to_bin(char ch)
+int hex_to_bin(unsigned char ch)
{
- if ((ch >= '0') && (ch <= '9'))
- return ch - '0';
- ch = tolower(ch);
- if ((ch >= 'a') && (ch <= 'f'))
- return ch - 'a' + 10;
- return -1;
+ unsigned char cu = ch & 0xdf;
+ return -1 +
+ ((ch - '0' + 1) & (unsigned)((ch - '9' - 1) & ('0' - 1 - ch)) >> 8) +
+ ((cu - 'A' + 11) & (unsigned)((cu - 'F' - 1) & ('A' - 1 - cu)) >> 8);
}
EXPORT_SYMBOL(hex_to_bin);
@@ -44,10 +62,13 @@ EXPORT_SYMBOL(hex_to_bin);
int hex2bin(u8 *dst, const char *src, size_t count)
{
while (count--) {
- int hi = hex_to_bin(*src++);
- int lo = hex_to_bin(*src++);
+ int hi, lo;
- if ((hi < 0) || (lo < 0))
+ hi = hex_to_bin(*src++);
+ if (unlikely(hi < 0))
+ return -EINVAL;
+ lo = hex_to_bin(*src++);
+ if (unlikely(lo < 0))
return -EINVAL;
*dst++ = (hi << 4) | lo;
diff --git a/mm/mmap.c b/mm/mmap.c
index 58cfd5b1e0b1..88e686367776 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2077,14 +2077,6 @@ unsigned long unmapped_area_topdown(struct vm_unmapped_area_info *info)
}
-#ifndef arch_get_mmap_end
-#define arch_get_mmap_end(addr) (TASK_SIZE)
-#endif
-
-#ifndef arch_get_mmap_base
-#define arch_get_mmap_base(addr, base) (base)
-#endif
-
/* Get an address range which is currently unmapped.
* For shmat() with addr=0.
*
diff --git a/net/core/lwt_bpf.c b/net/core/lwt_bpf.c
index a5502c5aa44e..bf270b6a99b4 100644
--- a/net/core/lwt_bpf.c
+++ b/net/core/lwt_bpf.c
@@ -158,10 +158,8 @@ static int bpf_output(struct net *net, struct sock *sk, struct sk_buff *skb)
return dst->lwtstate->orig_output(net, sk, skb);
}
-static int xmit_check_hhlen(struct sk_buff *skb)
+static int xmit_check_hhlen(struct sk_buff *skb, int hh_len)
{
- int hh_len = skb_dst(skb)->dev->hard_header_len;
-
if (skb_headroom(skb) < hh_len) {
int nhead = HH_DATA_ALIGN(hh_len - skb_headroom(skb));
@@ -273,6 +271,7 @@ static int bpf_xmit(struct sk_buff *skb)
bpf = bpf_lwt_lwtunnel(dst->lwtstate);
if (bpf->xmit.prog) {
+ int hh_len = dst->dev->hard_header_len;
__be16 proto = skb->protocol;
int ret;
@@ -290,7 +289,7 @@ static int bpf_xmit(struct sk_buff *skb)
/* If the header was expanded, headroom might be too
* small for L2 header to come, expand as needed.
*/
- ret = xmit_check_hhlen(skb);
+ ret = xmit_check_hhlen(skb, hh_len);
if (unlikely(ret))
return ret;
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index f67f1d27f565..5b38d03f6d79 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -432,14 +432,12 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev,
__be16 proto)
{
struct ip_tunnel *tunnel = netdev_priv(dev);
-
- if (tunnel->parms.o_flags & TUNNEL_SEQ)
- tunnel->o_seqno++;
+ __be16 flags = tunnel->parms.o_flags;
/* Push GRE header. */
gre_build_header(skb, tunnel->tun_hlen,
- tunnel->parms.o_flags, proto, tunnel->parms.o_key,
- htonl(tunnel->o_seqno));
+ flags, proto, tunnel->parms.o_key,
+ (flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++) : 0);
ip_tunnel_xmit(skb, dev, tnl_params, tnl_params->protocol);
}
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index c0fcfa296468..b0e6fc2c5e10 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -3717,7 +3717,8 @@ static int tcp_ack(struct sock *sk, const struct sk_buff *skb, int flag)
tcp_process_tlp_ack(sk, ack, flag);
if (tcp_ack_is_dubious(sk, flag)) {
- if (!(flag & (FLAG_SND_UNA_ADVANCED | FLAG_NOT_DUP))) {
+ if (!(flag & (FLAG_SND_UNA_ADVANCED |
+ FLAG_NOT_DUP | FLAG_DSACKING_ACK))) {
num_dupack = 1;
/* Consider if pure acks were aggregated in tcp_add_backlog() */
if (!(flag & FLAG_DATA))
@@ -5230,7 +5231,17 @@ static void tcp_new_space(struct sock *sk)
sk->sk_write_space(sk);
}
-static void tcp_check_space(struct sock *sk)
+/* Caller made space either from:
+ * 1) Freeing skbs in rtx queues (after tp->snd_una has advanced)
+ * 2) Sent skbs from output queue (and thus advancing tp->snd_nxt)
+ *
+ * We might be able to generate EPOLLOUT to the application if:
+ * 1) Space consumed in output/rtx queues is below sk->sk_sndbuf/2
+ * 2) notsent amount (tp->write_seq - tp->snd_nxt) became
+ * small enough that tcp_stream_memory_free() decides it
+ * is time to generate EPOLLOUT.
+ */
+void tcp_check_space(struct sock *sk)
{
if (sock_flag(sk, SOCK_QUEUE_SHRUNK)) {
sock_reset_flag(sk, SOCK_QUEUE_SHRUNK);
diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c
index 194743bd3fc1..9b038cb0a43d 100644
--- a/net/ipv4/tcp_minisocks.c
+++ b/net/ipv4/tcp_minisocks.c
@@ -538,7 +538,7 @@ struct sock *tcp_create_openreq_child(const struct sock *sk,
newtp->tsoffset = treq->ts_off;
#ifdef CONFIG_TCP_MD5SIG
newtp->md5sig_info = NULL; /*XXX*/
- if (newtp->af_specific->md5_lookup(sk, newsk))
+ if (treq->af_specific->req_md5_lookup(sk, req_to_sk(req)))
newtp->tcp_header_len += TCPOLEN_MD5SIG_ALIGNED;
#endif
if (skb->len >= TCP_MSS_DEFAULT + newtp->tcp_header_len)
diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c
index 139e962d1aef..67493ec6318a 100644
--- a/net/ipv4/tcp_output.c
+++ b/net/ipv4/tcp_output.c
@@ -81,6 +81,7 @@ static void tcp_event_new_data_sent(struct sock *sk, struct sk_buff *skb)
NET_ADD_STATS(sock_net(sk), LINUX_MIB_TCPORIGDATASENT,
tcp_skb_pcount(skb));
+ tcp_check_space(sk);
}
/* SND.NXT, if window was not shrunk or the amount of shrunk was less than one
diff --git a/net/ipv4/tcp_rate.c b/net/ipv4/tcp_rate.c
index 0de693565963..6ab197928abb 100644
--- a/net/ipv4/tcp_rate.c
+++ b/net/ipv4/tcp_rate.c
@@ -73,26 +73,31 @@ void tcp_rate_skb_sent(struct sock *sk, struct sk_buff *skb)
*
* If an ACK (s)acks multiple skbs (e.g., stretched-acks), this function is
* called multiple times. We favor the information from the most recently
- * sent skb, i.e., the skb with the highest prior_delivered count.
+ * sent skb, i.e., the skb with the most recently sent time and the highest
+ * sequence.
*/
void tcp_rate_skb_delivered(struct sock *sk, struct sk_buff *skb,
struct rate_sample *rs)
{
struct tcp_sock *tp = tcp_sk(sk);
struct tcp_skb_cb *scb = TCP_SKB_CB(skb);
+ u64 tx_tstamp;
if (!scb->tx.delivered_mstamp)
return;
+ tx_tstamp = tcp_skb_timestamp_us(skb);
if (!rs->prior_delivered ||
- after(scb->tx.delivered, rs->prior_delivered)) {
+ tcp_skb_sent_after(tx_tstamp, tp->first_tx_mstamp,
+ scb->end_seq, rs->last_end_seq)) {
rs->prior_delivered = scb->tx.delivered;
rs->prior_mstamp = scb->tx.delivered_mstamp;
rs->is_app_limited = scb->tx.is_app_limited;
rs->is_retrans = scb->sacked & TCPCB_RETRANS;
+ rs->last_end_seq = scb->end_seq;
/* Record send time of most recently ACKed packet: */
- tp->first_tx_mstamp = tcp_skb_timestamp_us(skb);
+ tp->first_tx_mstamp = tx_tstamp;
/* Find the duration of the "send phase" of this window: */
rs->interval_us = tcp_stamp_us_delta(tp->first_tx_mstamp,
scb->tx.first_tx_mstamp);
diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index 5dbc280d4385..e550db28aabb 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -730,6 +730,7 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
struct ip_tunnel_info *tun_info;
const struct ip_tunnel_key *key;
__be16 flags;
+ int tun_hlen;
tun_info = skb_tunnel_info(skb);
if (unlikely(!tun_info ||
@@ -748,9 +749,9 @@ static netdev_tx_t __gre6_xmit(struct sk_buff *skb,
dsfield = key->tos;
flags = key->tun_flags &
(TUNNEL_CSUM | TUNNEL_KEY | TUNNEL_SEQ);
- tunnel->tun_hlen = gre_calc_hlen(flags);
+ tun_hlen = gre_calc_hlen(flags);
- gre_build_header(skb, tunnel->tun_hlen,
+ gre_build_header(skb, tun_hlen,
flags, protocol,
tunnel_id_to_key32(tun_info->key.tun_id),
(flags & TUNNEL_SEQ) ? htonl(tunnel->o_seqno++)
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index d1524ca4b90e..a189079a6ea5 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -1421,7 +1421,7 @@ int __init ip_vs_conn_init(void)
pr_info("Connection hash table configured "
"(size=%d, memory=%ldKbytes)\n",
ip_vs_conn_tab_size,
- (long)(ip_vs_conn_tab_size*sizeof(struct list_head))/1024);
+ (long)(ip_vs_conn_tab_size*sizeof(*ip_vs_conn_tab))/1024);
IP_VS_DBG(0, "Each connection entry needs %zd bytes at least\n",
sizeof(struct ip_vs_conn));
diff --git a/net/netfilter/nft_socket.c b/net/netfilter/nft_socket.c
index 637ce3e8c575..4026ec38526f 100644
--- a/net/netfilter/nft_socket.c
+++ b/net/netfilter/nft_socket.c
@@ -14,6 +14,32 @@ struct nft_socket {
};
};
+static struct sock *nft_socket_do_lookup(const struct nft_pktinfo *pkt)
+{
+ const struct net_device *indev = nft_in(pkt);
+ const struct sk_buff *skb = pkt->skb;
+ struct sock *sk = NULL;
+
+ if (!indev)
+ return NULL;
+
+ switch (nft_pf(pkt)) {
+ case NFPROTO_IPV4:
+ sk = nf_sk_lookup_slow_v4(nft_net(pkt), skb, indev);
+ break;
+#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
+ case NFPROTO_IPV6:
+ sk = nf_sk_lookup_slow_v6(nft_net(pkt), skb, indev);
+ break;
+#endif
+ default:
+ WARN_ON_ONCE(1);
+ break;
+ }
+
+ return sk;
+}
+
static void nft_socket_eval(const struct nft_expr *expr,
struct nft_regs *regs,
const struct nft_pktinfo *pkt)
@@ -27,20 +53,7 @@ static void nft_socket_eval(const struct nft_expr *expr,
sk = NULL;
if (!sk)
- switch(nft_pf(pkt)) {
- case NFPROTO_IPV4:
- sk = nf_sk_lookup_slow_v4(nft_net(pkt), skb, nft_in(pkt));
- break;
-#if IS_ENABLED(CONFIG_NF_TABLES_IPV6)
- case NFPROTO_IPV6:
- sk = nf_sk_lookup_slow_v6(nft_net(pkt), skb, nft_in(pkt));
- break;
-#endif
- default:
- WARN_ON_ONCE(1);
- regs->verdict.code = NFT_BREAK;
- return;
- }
+ sk = nft_socket_do_lookup(pkt);
if (!sk) {
regs->verdict.code = NFT_BREAK;
@@ -123,6 +136,16 @@ static int nft_socket_dump(struct sk_buff *skb,
return 0;
}
+static int nft_socket_validate(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nft_data **data)
+{
+ return nft_chain_validate_hooks(ctx->chain,
+ (1 << NF_INET_PRE_ROUTING) |
+ (1 << NF_INET_LOCAL_IN) |
+ (1 << NF_INET_LOCAL_OUT));
+}
+
static struct nft_expr_type nft_socket_type;
static const struct nft_expr_ops nft_socket_ops = {
.type = &nft_socket_type,
@@ -130,6 +153,7 @@ static const struct nft_expr_ops nft_socket_ops = {
.eval = nft_socket_eval,
.init = nft_socket_init,
.dump = nft_socket_dump,
+ .validate = nft_socket_validate,
};
static struct nft_expr_type nft_socket_type __read_mostly = {
diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c
index 0d225f891b61..8d32229199b9 100644
--- a/net/sctp/sm_sideeffect.c
+++ b/net/sctp/sm_sideeffect.c
@@ -458,6 +458,10 @@ void sctp_generate_reconf_event(struct timer_list *t)
goto out_unlock;
}
+ /* This happens when the response arrives after the timer is triggered. */
+ if (!asoc->strreset_chunk)
+ goto out_unlock;
+
error = sctp_do_sm(net, SCTP_EVENT_T_TIMEOUT,
SCTP_ST_TIMEOUT(SCTP_EVENT_TIMEOUT_RECONF),
asoc->state, asoc->ep, asoc,
diff --git a/net/smc/af_smc.c b/net/smc/af_smc.c
index 5221092cc66d..a5a8cca46bd5 100644
--- a/net/smc/af_smc.c
+++ b/net/smc/af_smc.c
@@ -816,6 +816,8 @@ static void smc_connect_work(struct work_struct *work)
smc->sk.sk_state = SMC_CLOSED;
if (rc == -EPIPE || rc == -EAGAIN)
smc->sk.sk_err = EPIPE;
+ else if (rc == -ECONNREFUSED)
+ smc->sk.sk_err = ECONNREFUSED;
else if (signal_pending(current))
smc->sk.sk_err = -sock_intr_errno(timeo);
sock_put(&smc->sk); /* passive closing */
diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c
index 0f034c3bc37d..abb93f7343c5 100644
--- a/net/tls/tls_device.c
+++ b/net/tls/tls_device.c
@@ -470,11 +470,13 @@ static int tls_push_data(struct sock *sk,
copy = min_t(size_t, size, (pfrag->size - pfrag->offset));
copy = min_t(size_t, copy, (max_open_record_len - record->len));
- rc = tls_device_copy_data(page_address(pfrag->page) +
- pfrag->offset, copy, msg_iter);
- if (rc)
- goto handle_error;
- tls_append_frag(record, pfrag, copy);
+ if (copy) {
+ rc = tls_device_copy_data(page_address(pfrag->page) +
+ pfrag->offset, copy, msg_iter);
+ if (rc)
+ goto handle_error;
+ tls_append_frag(record, pfrag, copy);
+ }
size -= copy;
if (!size) {
diff --git a/sound/soc/codecs/wm8731.c b/sound/soc/codecs/wm8731.c
index 6fd1bef848ed..fa55d79b39b6 100644
--- a/sound/soc/codecs/wm8731.c
+++ b/sound/soc/codecs/wm8731.c
@@ -601,7 +601,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
ret = wm8731_reset(wm8731->regmap);
if (ret < 0) {
dev_err(dev, "Failed to issue reset: %d\n", ret);
- goto err_regulator_enable;
+ goto err;
}
/* Clear POWEROFF, keep everything else disabled */
@@ -618,10 +618,7 @@ static int wm8731_hw_init(struct device *dev, struct wm8731_priv *wm8731)
regcache_mark_dirty(wm8731->regmap);
-err_regulator_enable:
- /* Regulators will be enabled by bias management */
- regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
-
+err:
return ret;
}
@@ -765,21 +762,27 @@ static int wm8731_i2c_probe(struct i2c_client *i2c,
ret = PTR_ERR(wm8731->regmap);
dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
ret);
- return ret;
+ goto err_regulator_enable;
}
ret = wm8731_hw_init(&i2c->dev, wm8731);
if (ret != 0)
- return ret;
+ goto err_regulator_enable;
ret = devm_snd_soc_register_component(&i2c->dev,
&soc_component_dev_wm8731, &wm8731_dai, 1);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret);
- return ret;
+ goto err_regulator_enable;
}
return 0;
+
+err_regulator_enable:
+ /* Regulators will be enabled by bias management */
+ regulator_bulk_disable(ARRAY_SIZE(wm8731->supplies), wm8731->supplies);
+
+ return ret;
}
static int wm8731_i2c_remove(struct i2c_client *client)
prev parent reply other threads:[~2022-05-09 7:51 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-09 7:37 Linux 5.4.192 Greg Kroah-Hartman
2022-05-09 7:37 ` Greg Kroah-Hartman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16520818661988@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.