From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Linux 4.14.278
Date: Thu, 12 May 2022 13:15:59 +0200 [thread overview]
Message-ID: <165235416010173@kroah.com> (raw)
I'm announcing the release of the 4.14.278 kernel.
All users of the 4.14 kernel series must upgrade.
The updated 4.14.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.14.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 2
arch/arm/boot/dts/imx6qdl-apalis.dtsi | 10 +++-
arch/arm/boot/dts/omap3-gta04.dtsi | 2
arch/arm/mach-omap2/omap4-common.c | 2
arch/mips/include/asm/timex.h | 8 +--
arch/mips/kernel/time.c | 11 +----
arch/parisc/kernel/processor.c | 3 -
arch/x86/include/asm/microcode.h | 2
arch/x86/kernel/cpu/microcode/core.c | 6 +-
arch/x86/kvm/cpuid.c | 5 ++
arch/x86/lib/usercopy_64.c | 2
arch/x86/power/cpu.c | 8 +++
drivers/block/Kconfig | 16 +++++++
drivers/block/floppy.c | 43 ++++++++++++++------
drivers/bus/sunxi-rsb.c | 2
drivers/clk/sunxi/clk-sun9i-mmc.c | 2
drivers/firewire/core-card.c | 3 +
drivers/firewire/core-cdev.c | 4 +
drivers/firewire/core-topology.c | 9 +---
drivers/firewire/core-transaction.c | 30 +++++++------
drivers/firewire/sbp2.c | 13 +++---
drivers/gpu/drm/vgem/vgem_drv.c | 9 ++--
drivers/hwmon/adt7470.c | 4 -
drivers/iio/dac/ad5446.c | 2
drivers/iio/dac/ad5592r-base.c | 2
drivers/iio/magnetometer/ak8975.c | 1
drivers/lightnvm/Kconfig | 2
drivers/md/dm.c | 19 +++++---
drivers/mtd/nand/sh_flctl.c | 14 +++---
drivers/net/can/grcan.c | 8 ++-
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 9 ++--
drivers/net/ethernet/broadcom/genet/bcmgenet.c | 7 +++
drivers/net/ethernet/smsc/smsc911x.c | 2
drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.c | 8 +++
drivers/net/ethernet/stmicro/stmmac/altr_tse_pcs.h | 4 -
drivers/net/ethernet/stmicro/stmmac/dwmac-socfpga.c | 13 +++---
drivers/net/ethernet/xilinx/xilinx_emaclite.c | 15 +++++-
drivers/net/hamradio/6pack.c | 5 +-
drivers/net/hippi/rrunner.c | 2
drivers/nfc/nfcmrvl/main.c | 2
drivers/pci/host/pci-aardvark.c | 16 +++----
drivers/phy/samsung/phy-exynos5250-sata.c | 21 ++++++---
drivers/pinctrl/pinctrl-pistachio.c | 6 +-
drivers/tty/n_gsm.c | 40 +++++++++---------
drivers/tty/serial/8250/8250_pci.c | 8 +--
drivers/tty/serial/8250/8250_port.c | 2
drivers/usb/core/quirks.c | 6 ++
drivers/usb/gadget/configfs.c | 2
drivers/usb/gadget/function/uvc_queue.c | 2
drivers/usb/host/xhci-ring.c | 2
drivers/usb/host/xhci.c | 11 +++++
drivers/usb/misc/uss720.c | 3 -
drivers/usb/mtu3/mtu3_dr.c | 6 --
drivers/usb/serial/cp210x.c | 2
drivers/usb/serial/option.c | 12 +++++
drivers/usb/serial/whiteheat.c | 5 --
fs/btrfs/tree-log.c | 14 ++++++
fs/cifs/smb2ops.c | 8 +++
include/linux/kernel.h | 2
include/net/tcp.h | 1
lib/hexdump.c | 41 ++++++++++++++-----
net/ipv4/igmp.c | 9 ++--
net/ipv4/ip_gre.c | 8 +--
net/ipv4/tcp_input.c | 12 +++++
net/ipv4/tcp_output.c | 1
net/ipv6/addrconf.c | 8 ++-
net/netfilter/ipvs/ip_vs_conn.c | 2
net/nfc/core.c | 29 ++++++-------
net/nfc/netlink.c | 4 -
net/sched/cls_u32.c | 18 +++++---
net/sctp/sm_sideeffect.c | 4 +
net/sunrpc/xprtsock.c | 3 -
sound/firewire/fireworks/fireworks_hwdep.c | 1
sound/soc/codecs/wm8731.c | 19 +++++---
sound/soc/codecs/wm8958-dsp2.c | 8 +--
sound/soc/soc-generic-dmaengine-pcm.c | 6 +-
76 files changed, 434 insertions(+), 219 deletions(-)
Armin Wolf (1):
hwmon: (adt7470) Fix warning on module removal
Borislav Petkov (1):
x86/cpu: Load microcode during restore_processor_state()
Bruno Thomsen (1):
USB: serial: cp210x: add PIDs for Kamstrup USB Meter Reader
Chengfeng Ye (1):
firewire: fix potential uaf in outbound_phy_packet_callback()
Christophe JAILLET (1):
bus: sunxi-rsb: Fix the return value of sunxi_rsb_device_create()
Codrin Ciubotariu (1):
ASoC: dmaengine: Restore NULL prepare_slave_config() callback
Dan Vacura (1):
usb: gadget: uvc: Fix crash when encoding data for usb request
Daniel Hellstrom (1):
can: grcan: use ofdev->dev when allocating DMA memory
Daniel Starke (7):
tty: n_gsm: fix wrong signal octet encoding in convergence layer type 2
tty: n_gsm: fix malformed counter for out of frame data
tty: n_gsm: fix insufficient txframe size
tty: n_gsm: fix missing explicit ldisc flush
tty: n_gsm: fix wrong command retry handling
tty: n_gsm: fix wrong command frame length field encoding
tty: n_gsm: fix incorrect UA handling
Daniel Vetter (1):
drm/vgem: Close use-after-free race in vgem_gem_create
Daniele Palmas (1):
USB: serial: option: add Telit 0x1057, 0x1058, 0x1075 compositions
Duoming Zhou (5):
drivers: net: hippi: Fix deadlock in rr_close()
can: grcan: grcan_close(): fix deadlock
nfc: replace improper check device_is_registered() in netlink related functions
nfc: nfcmrvl: main: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugs
NFC: netlink: fix sleep in atomic bug when firmware download timeout
Eric Dumazet (3):
net/sched: cls_u32: fix netns refcount changes in u32_change()
tcp: fix potential xmit stalls caused by TCP_NOTSENT_LOWAT
net: igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
Fabio Estevam (1):
ARM: dts: imx6qdl-apalis: Fix sgtl5000 detection issue
Filipe Manana (1):
btrfs: always log symlinks in full mode
Greg Kroah-Hartman (3):
Revert "net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-link"
lightnvm: disable the subsystem
Linux 4.14.278
H. Nikolaus Schaller (1):
ARM: dts: Fix mmc order for omap3-gta04
Hangyu Hua (1):
usb: misc: fix improper handling of refcount in uss720_probe()
Helge Deller (1):
parisc: Merge model and model name into one line in /proc/cpuinfo
Henry Lin (1):
xhci: stop polling roothubs after shutdown
Jakob Koschel (1):
firewire: remove check of list iterator against head past the loop body
Jiazi Li (1):
dm: fix mempool NULL pointer race when completing IO
Jonathan Lemon (1):
net: bcmgenet: hide status block before TX timestamping
Kees Cook (1):
USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTS
Krzysztof Kozlowski (1):
phy: samsung: exynos5250-sata: fix missing device put in probe error paths
Lin Ma (2):
hamradio: defer 6pack kfree after unregister_netdev
hamradio: remove needs_free_netdev to avoid UAF
Lv Ruyi (1):
pinctrl: pistachio: fix use of irq_of_parse_and_map()
Maciej W. Rozycki (3):
serial: 8250: Also set sticky MCR bits in console restoration
serial: 8250: Correct the clock for EndRun PTP/1588 PCIe device
MIPS: Fix CP0 counter erratum detection for R4k CPUs
Macpaul Lin (1):
usb: mtu3: fix USB 3.0 dual-role-switch from device to host
Manish Chopra (1):
bnx2x: fix napi API usage sequence
Mark Brown (1):
ASoC: wm8958: Fix change notifications for DSP controls
Miaoqian Lin (3):
phy: samsung: Fix missing of_node_put() in exynos_sata_phy_probe
ARM: OMAP2+: Fix refcount leak in omap_gic_of_init
mtd: rawnand: Fix return value check of wait_for_completion_timeout
Michael Hennerich (1):
iio: dac: ad5446: Fix read_raw not returning set value
Mike Snitzer (1):
dm: interlock pending dm_io and dm_wait_for_bios_completion
Mikulas Patocka (3):
hex2bin: make the function hex_to_bin constant-time
hex2bin: fix access beyond string end
x86: __memcpy_flushcache: fix wrong alignment if size > 2^32
Niels Dossche (1):
firewire: core: extend card->lock in fw_core_handle_bus_reset
Oliver Neukum (2):
USB: quirks: add a Realtek card reader
USB: quirks: add STRING quirk for VCOM device
Pali Rohár (2):
PCI: aardvark: Clear all MSIs at setup
PCI: aardvark: Fix reading MSI interrupt number
Peilin Ye (1):
ip_gre: Make o_seqno start from 0 in native mode
Pengcheng Yang (1):
ipvs: correctly print the memory size of ip_vs_conn_tab
Ronnie Sahlberg (1):
cifs: destage any unwritten data to the server before calling copychunk_write
Sandipan Das (1):
kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMU
Sergey Shtylyov (1):
smsc911x: allow using IRQ0
Shravya Kumbham (1):
net: emaclite: Add error handling for of_address_to_resource()
Slark Xiao (1):
USB: serial: option: add support for Cinterion MV32-WA/MV32-WB
Takashi Sakamoto (1):
ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes
Trond Myklebust (1):
Revert "SUNRPC: attempt AF_LOCAL connect on setup"
Vijayavardhan Vennapusa (1):
usb: gadget: configfs: clear deactivation flag in configfs_composite_unbind()
Weitao Wang (1):
USB: Fix xhci event ring dequeue pointer ERDP update issue
Willy Tarreau (1):
floppy: disable FDRAWCMD by default
Xin Long (1):
sctp: check asoc strreset_chunk in sctp_generate_reconf_event
Yang Yingliang (1):
clk: sunxi: sun9i-mmc: check return value after calling platform_get_resource()
Zheyu Ma (2):
iio: magnetometer: ak8975: Fix the error handling in ak8975_power_on()
ASoC: wm8731: Disable the regulator when probing fails
Zizhuang Deng (1):
iio: dac: ad5592r: Fix the missing return value.
j.nixdorf@avm.de (1):
net: ipv6: ensure we call ipv6_mc_down() at most once
next reply other threads:[~2022-05-12 11:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-12 11:15 Greg Kroah-Hartman [this message]
2022-05-12 11:16 ` Linux 4.14.278 Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=165235416010173@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.