From: <gregkh@linuxfoundation.org>
To: cy_huang@richtek.com, fparent@baylibre.com,
gregkh@linuxfoundation.org, heikki.krogerus@linux.intel.com,
linux@roeck-us.net, macpaul.lin@mediatek.com,
stable@vger.kernel.org
Subject: patch "usb: typec: tcpci_mt6360: Update for BMC PHY setting" added to usb-linus
Date: Thu, 12 May 2022 18:34:37 +0200 [thread overview]
Message-ID: <1652373277464@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
usb: typec: tcpci_mt6360: Update for BMC PHY setting
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
From 191e3b73f7ff5f3e6262e15477b68a0876ad63fa Mon Sep 17 00:00:00 2001
From: ChiYuan Huang <cy_huang@richtek.com>
Date: Tue, 10 May 2022 13:13:00 +0800
Subject: usb: typec: tcpci_mt6360: Update for BMC PHY setting
Update MT6360 BMC PHY Tx/Rx setting for the compatibility.
Macpaul reported this CtoDP cable attention message cannot be received from
MT6360 TCPC. But actually, attention message really sent from UFP_D
device.
After RD's comment, there may be BMC PHY Tx/Rx setting causes this issue.
Below's the detailed TCPM log and DP attention message didn't received from 6360
TCPCI.
[ 1206.367775] Identity: 0000:0000.0000
[ 1206.416570] Alternate mode 0: SVID 0xff01, VDO 1: 0x00000405
[ 1206.447378] AMS DFP_TO_UFP_ENTER_MODE start
[ 1206.447383] PD TX, header: 0x1d6f
[ 1206.449393] PD TX complete, status: 0
[ 1206.454110] PD RX, header: 0x184f [1]
[ 1206.456867] Rx VDM cmd 0xff018144 type 1 cmd 4 len 1
[ 1206.456872] AMS DFP_TO_UFP_ENTER_MODE finished
[ 1206.456873] cc:=4
[ 1206.473100] AMS STRUCTURED_VDMS start
[ 1206.473103] PD TX, header: 0x2f6f
[ 1206.475397] PD TX complete, status: 0
[ 1206.480442] PD RX, header: 0x2a4f [1]
[ 1206.483145] Rx VDM cmd 0xff018150 type 1 cmd 16 len 2
[ 1206.483150] AMS STRUCTURED_VDMS finished
[ 1206.483151] cc:=4
[ 1206.505643] AMS STRUCTURED_VDMS start
[ 1206.505646] PD TX, header: 0x216f
[ 1206.507933] PD TX complete, status: 0
[ 1206.512664] PD RX, header: 0x1c4f [1]
[ 1206.515456] Rx VDM cmd 0xff018151 type 1 cmd 17 len 1
[ 1206.515460] AMS STRUCTURED_VDMS finished
[ 1206.515461] cc:=4
Fixes: e1aefcdd394fd ("usb typec: mt6360: Add support for mt6360 Type-C driver")
Cc: stable <stable@vger.kernel.org>
Reported-by: Macpaul Lin <macpaul.lin@mediatek.com>
Tested-by: Macpaul Lin <macpaul.lin@mediatek.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Link: https://lore.kernel.org/r/1652159580-30959-1-git-send-email-u0084500@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/typec/tcpm/tcpci_mt6360.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/drivers/usb/typec/tcpm/tcpci_mt6360.c b/drivers/usb/typec/tcpm/tcpci_mt6360.c
index f1bd9e09bc87..8a952eaf9016 100644
--- a/drivers/usb/typec/tcpm/tcpci_mt6360.c
+++ b/drivers/usb/typec/tcpm/tcpci_mt6360.c
@@ -15,6 +15,9 @@
#include "tcpci.h"
+#define MT6360_REG_PHYCTRL1 0x80
+#define MT6360_REG_PHYCTRL3 0x82
+#define MT6360_REG_PHYCTRL7 0x86
#define MT6360_REG_VCONNCTRL1 0x8C
#define MT6360_REG_MODECTRL2 0x8F
#define MT6360_REG_SWRESET 0xA0
@@ -22,6 +25,8 @@
#define MT6360_REG_DRPCTRL1 0xA2
#define MT6360_REG_DRPCTRL2 0xA3
#define MT6360_REG_I2CTORST 0xBF
+#define MT6360_REG_PHYCTRL11 0xCA
+#define MT6360_REG_RXCTRL1 0xCE
#define MT6360_REG_RXCTRL2 0xCF
#define MT6360_REG_CTDCTRL2 0xEC
@@ -106,6 +111,27 @@ static int mt6360_tcpc_init(struct tcpci *tcpci, struct tcpci_data *tdata)
if (ret)
return ret;
+ /* BMC PHY */
+ ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL1, 0x3A70);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, MT6360_REG_PHYCTRL3, 0x82);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, MT6360_REG_PHYCTRL7, 0x36);
+ if (ret)
+ return ret;
+
+ ret = mt6360_tcpc_write16(regmap, MT6360_REG_PHYCTRL11, 0x3C60);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(regmap, MT6360_REG_RXCTRL1, 0xE8);
+ if (ret)
+ return ret;
+
/* Set shipping mode off, AUTOIDLE on */
return regmap_write(regmap, MT6360_REG_MODECTRL2, 0x7A);
}
--
2.36.1
next reply other threads:[~2022-05-12 16:34 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-05-12 16:34 gregkh [this message]
-- strict thread matches above, loose matches on Subject: below --
2022-05-12 16:33 patch "usb: typec: tcpci_mt6360: Update for BMC PHY setting" added to usb-linus gregkh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1652373277464@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=cy_huang@richtek.com \
--cc=fparent@baylibre.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux@roeck-us.net \
--cc=macpaul.lin@mediatek.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.