From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Linux 5.4.202
Date: Wed, 29 Jun 2022 09:16:52 +0200 [thread overview]
Message-ID: <165648701319366@kroah.com> (raw)
I'm announcing the release of the 5.4.202 kernel.
All users of the 5.4 kernel series must upgrade.
The updated 5.4.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.4.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Documentation/ABI/testing/sysfs-bus-iio-vf610 | 2
Makefile | 4
arch/arm/boot/dts/imx6qdl.dtsi | 2
arch/arm/mach-axxia/platsmp.c | 1
arch/arm/mach-cns3xxx/core.c | 2
arch/arm/mach-exynos/exynos.c | 1
arch/mips/vr41xx/common/icu.c | 2
arch/parisc/Kconfig | 1
arch/powerpc/kernel/process.c | 2
arch/powerpc/kernel/rtas.c | 11 +
arch/powerpc/platforms/powernv/powernv.h | 2
arch/powerpc/platforms/powernv/rng.c | 52 ++++++---
arch/powerpc/platforms/powernv/setup.c | 2
arch/powerpc/platforms/pseries/pseries.h | 2
arch/powerpc/platforms/pseries/rng.c | 11 -
arch/powerpc/platforms/pseries/setup.c | 2
arch/s390/kernel/perf_cpum_cf.c | 22 +++
arch/xtensa/kernel/time.c | 1
arch/xtensa/platforms/xtfpga/setup.c | 1
drivers/base/regmap/regmap-irq.c | 5
drivers/char/random.c | 6 -
drivers/dma-buf/udmabuf.c | 5
drivers/gpio/gpio-vr41xx.c | 2
drivers/gpio/gpio-winbond.c | 7 -
drivers/gpu/drm/msm/disp/mdp4/mdp4_kms.c | 2
drivers/iio/accel/bma180.c | 3
drivers/iio/accel/mma8452.c | 10 +
drivers/iio/accel/mxc4005.c | 4
drivers/iio/adc/axp288_adc.c | 8 +
drivers/iio/adc/stm32-adc-core.c | 2
drivers/iio/chemical/ccs811.c | 4
drivers/iio/gyro/mpu3050-core.c | 1
drivers/iio/trigger/iio-trig-sysfs.c | 1
drivers/md/dm-era-target.c | 8 +
drivers/md/dm-log.c | 2
drivers/mmc/host/sdhci-pci-o2micro.c | 2
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 2
drivers/net/bonding/bond_main.c | 4
drivers/net/ethernet/intel/ice/ice_ethtool.c | 39 ++++++
drivers/net/ethernet/intel/igb/igb_main.c | 12 --
drivers/net/phy/aquantia_main.c | 15 ++
drivers/net/virtio_net.c | 25 +---
drivers/soc/bcm/brcmstb/pm/pm-arm.c | 1
drivers/tty/vt/vt.c | 39 ------
drivers/tty/vt/vt_ioctl.c | 147 --------------------------
drivers/usb/chipidea/udc.c | 3
drivers/usb/host/xhci-hub.c | 2
drivers/usb/host/xhci.c | 15 ++
drivers/usb/host/xhci.h | 2
drivers/usb/serial/option.c | 6 +
drivers/xen/features.c | 2
fs/afs/inode.c | 3
include/linux/kd.h | 8 -
include/linux/ratelimit.h | 12 +-
include/trace/events/libata.h | 1
net/core/filter.c | 34 ++++--
net/ipv4/ip_gre.c | 15 +-
net/ipv6/ip6_gre.c | 15 +-
net/openvswitch/flow.c | 2
net/sched/sch_netem.c | 4
scripts/mod/modpost.c | 2
sound/pci/hda/patch_conexant.c | 4
sound/pci/hda/patch_realtek.c | 10 +
sound/pci/hda/patch_via.c | 4
64 files changed, 314 insertions(+), 309 deletions(-)
Aidan MacDonald (1):
regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chips
Anatolii Gerasymenko (1):
ice: ethtool: advertise 1000M speeds properly
Andrew Donnellan (1):
powerpc/rtas: Allow ibm,platform-dump RTAS call with null buffer address
Baruch Siach (1):
iio: adc: vf610: fix conversion mode sysfs node name
Carlo Lobrano (1):
USB: serial: option: add Telit LE910Cx 0x1250 composition
Chevron Li (1):
mmc: sdhci-pci-o2micro: Fix card detect by dealing with debouncing
Claudiu Manoil (1):
phy: aquantia: Fix AN when higher speeds than 1G are not advertised
Dan Carpenter (1):
gpio: winbond: Fix error code in winbond_gpio_get()
David Howells (1):
afs: Fix dynamic root getattr
Dmitry Rokosov (3):
iio:chemical:ccs811: rearrange iio trigger get and register
iio:accel:bma180: rearrange iio trigger get and register
iio:accel:mxc4005: rearrange iio trigger get and register
Edward Wu (1):
ata: libata: add qc->flags in ata_qc_complete_template tracepoint
Eric Dumazet (1):
erspan: do not assume transport header is always set
Gerd Hoffmann (1):
udmabuf: add back sanity check
Greg Kroah-Hartman (1):
Linux 5.4.202
Haibo Chen (1):
iio: accel: mma8452: ignore the return value of reset operation
Hans de Goede (1):
iio: adc: axp288: Override TS pin bias current for some models
Helge Deller (1):
parisc: Enable ARCH_HAS_STRICT_MODULE_RWX
Jakub Kicinski (1):
Revert "net/tls: fix tls_sk_proto_close executed repeatedly"
Jason A. Donenfeld (5):
random: schedule mix_interrupt_randomness() less often
random: quiet urandom warning ratelimit suppression message
powerpc/powernv: wire up rng during setup_arch
random: update comment from copy_to_user() -> copy_to_iter()
powerpc/pseries: wire up rng during setup_arch()
Jay Vosburgh (1):
bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiers
Jiri Slaby (1):
vt: drop old FONT ioctls
Jon Maxwell (1):
bpf: Fix request_sock leak in sk lookup helpers
Julien Grall (1):
x86/xen: Remove undefined behavior in setup_features()
Kai-Heng Feng (1):
igb: Make DMA faster when CPU is active on the PCIe link
Kailang Yang (1):
ALSA: hda/realtek - ALC897 headset MIC no sound
Liang He (2):
xtensa: xtfpga: Fix refcount leak bug in setup
xtensa: Fix refcount leak bug in time.c
Lucas Stach (1):
ARM: dts: imx6qdl: correct PU regulator ramp delay
Macpaul Lin (1):
USB: serial: option: add Quectel RM500K module support
Masahiro Yamada (2):
modpost: fix section mismatch check for exported init/exit sections
kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS (2nd attempt)
Mathias Nyman (1):
xhci: turn off port power in shutdown
Miaoqian Lin (5):
drm/msm/mdp4: Fix refcount leak in mdp4_modeset_init_intf
ARM: exynos: Fix refcount leak in exynos_map_pmu
soc: bcm: brcmstb: pm: pm-arm: Fix refcount leak in brcmstb_pm_probe
ARM: Fix refcount leak in axxia_boot_secondary
ARM: cns3xxx: Fix refcount leak in cns3xxx_init
Mikulas Patocka (1):
dm mirror log: clear log bits up to BITS_PER_LONG boundary
Naveen N. Rao (1):
powerpc: Enable execve syscall exit tracepoint
Nikos Tsironis (1):
dm era: commit metadata in postsuspend after worker stops
Olivier Moysan (1):
iio: adc: stm32: fix maximum clock rate for stm32mp15x
Peilin Ye (1):
net/sched: sch_netem: Fix arithmetic in netem_dump() for 32-bit platforms
Rosemarie O'Riorden (1):
net: openvswitch: fix parsing of nw_proto for IPv6 fragments
Sascha Hauer (1):
mtd: rawnand: gpmi: Fix setting busy timeout setting
Stephan Gerhold (1):
virtio_net: fix xdp_rxq_info bug after suspend/resume
Takashi Iwai (2):
ALSA: hda/via: Fix missing beep setup
ALSA: hda/conexant: Fix missing beep setup
Thomas Richter (1):
s390/cpumf: Handle events cycles and instructions identical
Tim Crawford (1):
ALSA: hda/realtek: Add quirk for Clevo PD70PNT
Vincent Whitchurch (1):
iio: trigger: sysfs: fix use-after-free on remove
Xu Yang (1):
usb: chipidea: udc: check request status before setting device address
Yonglin Tan (1):
USB: serial: option: add Quectel EM05-G modem
Zheyu Ma (1):
iio: gyro: mpu3050: Fix the error handling in mpu3050_power_up()
Ziyang Xuan (1):
net/tls: fix tls_sk_proto_close executed repeatedly
huhai (1):
MIPS: Remove repetitive increase irq_err_count
next reply other threads:[~2022-06-29 7:17 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-29 7:16 Greg Kroah-Hartman [this message]
2022-06-29 7:16 ` Linux 5.4.202 Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=165648701319366@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.