All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: sudeep.holla@arm.com, huhai@kylinos.cn, liuyun01@kylinos.cn
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] firmware: arm_scpi: Ensure scpi_info is not assigned if the" failed to apply to 4.19-stable tree
Date: Mon, 15 Aug 2022 13:48:36 +0200	[thread overview]
Message-ID: <166056411623254@kroah.com> (raw)


The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 689640efc0a2c4e07e6f88affe6d42cd40cc3f85 Mon Sep 17 00:00:00 2001
From: Sudeep Holla <sudeep.holla@arm.com>
Date: Fri, 1 Jul 2022 17:03:10 +0100
Subject: [PATCH] firmware: arm_scpi: Ensure scpi_info is not assigned if the
 probe fails

When scpi probe fails, at any point, we need to ensure that the scpi_info
is not set and will remain NULL until the probe succeeds. If it is not
taken care, then it could result use-after-free as the value is exported
via get_scpi_ops() and could refer to a memory allocated via devm_kzalloc()
but freed when the probe fails.

Link: https://lore.kernel.org/r/20220701160310.148344-1-sudeep.holla@arm.com
Cc: stable@vger.kernel.org # 4.19+
Reported-by: huhai <huhai@kylinos.cn>
Reviewed-by: Jackie Liu <liuyun01@kylinos.cn>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>

diff --git a/drivers/firmware/arm_scpi.c b/drivers/firmware/arm_scpi.c
index ddf0b9ff9e15..435d0e2658a4 100644
--- a/drivers/firmware/arm_scpi.c
+++ b/drivers/firmware/arm_scpi.c
@@ -815,7 +815,7 @@ static int scpi_init_versions(struct scpi_drvinfo *info)
 		info->firmware_version = le32_to_cpu(caps.platform_version);
 	}
 	/* Ignore error if not implemented */
-	if (scpi_info->is_legacy && ret == -EOPNOTSUPP)
+	if (info->is_legacy && ret == -EOPNOTSUPP)
 		return 0;
 
 	return ret;
@@ -913,13 +913,14 @@ static int scpi_probe(struct platform_device *pdev)
 	struct resource res;
 	struct device *dev = &pdev->dev;
 	struct device_node *np = dev->of_node;
+	struct scpi_drvinfo *scpi_drvinfo;
 
-	scpi_info = devm_kzalloc(dev, sizeof(*scpi_info), GFP_KERNEL);
-	if (!scpi_info)
+	scpi_drvinfo = devm_kzalloc(dev, sizeof(*scpi_drvinfo), GFP_KERNEL);
+	if (!scpi_drvinfo)
 		return -ENOMEM;
 
 	if (of_match_device(legacy_scpi_of_match, &pdev->dev))
-		scpi_info->is_legacy = true;
+		scpi_drvinfo->is_legacy = true;
 
 	count = of_count_phandle_with_args(np, "mboxes", "#mbox-cells");
 	if (count < 0) {
@@ -927,19 +928,19 @@ static int scpi_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
-	scpi_info->channels = devm_kcalloc(dev, count, sizeof(struct scpi_chan),
-					   GFP_KERNEL);
-	if (!scpi_info->channels)
+	scpi_drvinfo->channels =
+		devm_kcalloc(dev, count, sizeof(struct scpi_chan), GFP_KERNEL);
+	if (!scpi_drvinfo->channels)
 		return -ENOMEM;
 
-	ret = devm_add_action(dev, scpi_free_channels, scpi_info);
+	ret = devm_add_action(dev, scpi_free_channels, scpi_drvinfo);
 	if (ret)
 		return ret;
 
-	for (; scpi_info->num_chans < count; scpi_info->num_chans++) {
+	for (; scpi_drvinfo->num_chans < count; scpi_drvinfo->num_chans++) {
 		resource_size_t size;
-		int idx = scpi_info->num_chans;
-		struct scpi_chan *pchan = scpi_info->channels + idx;
+		int idx = scpi_drvinfo->num_chans;
+		struct scpi_chan *pchan = scpi_drvinfo->channels + idx;
 		struct mbox_client *cl = &pchan->cl;
 		struct device_node *shmem = of_parse_phandle(np, "shmem", idx);
 
@@ -986,45 +987,53 @@ static int scpi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	scpi_info->commands = scpi_std_commands;
+	scpi_drvinfo->commands = scpi_std_commands;
 
-	platform_set_drvdata(pdev, scpi_info);
+	platform_set_drvdata(pdev, scpi_drvinfo);
 
-	if (scpi_info->is_legacy) {
+	if (scpi_drvinfo->is_legacy) {
 		/* Replace with legacy variants */
 		scpi_ops.clk_set_val = legacy_scpi_clk_set_val;
-		scpi_info->commands = scpi_legacy_commands;
+		scpi_drvinfo->commands = scpi_legacy_commands;
 
 		/* Fill priority bitmap */
 		for (idx = 0; idx < ARRAY_SIZE(legacy_hpriority_cmds); idx++)
 			set_bit(legacy_hpriority_cmds[idx],
-				scpi_info->cmd_priority);
+				scpi_drvinfo->cmd_priority);
 	}
 
-	ret = scpi_init_versions(scpi_info);
+	scpi_info = scpi_drvinfo;
+
+	ret = scpi_init_versions(scpi_drvinfo);
 	if (ret) {
 		dev_err(dev, "incorrect or no SCP firmware found\n");
+		scpi_info = NULL;
 		return ret;
 	}
 
-	if (scpi_info->is_legacy && !scpi_info->protocol_version &&
-	    !scpi_info->firmware_version)
+	if (scpi_drvinfo->is_legacy && !scpi_drvinfo->protocol_version &&
+	    !scpi_drvinfo->firmware_version)
 		dev_info(dev, "SCP Protocol legacy pre-1.0 firmware\n");
 	else
 		dev_info(dev, "SCP Protocol %lu.%lu Firmware %lu.%lu.%lu version\n",
 			 FIELD_GET(PROTO_REV_MAJOR_MASK,
-				   scpi_info->protocol_version),
+				   scpi_drvinfo->protocol_version),
 			 FIELD_GET(PROTO_REV_MINOR_MASK,
-				   scpi_info->protocol_version),
+				   scpi_drvinfo->protocol_version),
 			 FIELD_GET(FW_REV_MAJOR_MASK,
-				   scpi_info->firmware_version),
+				   scpi_drvinfo->firmware_version),
 			 FIELD_GET(FW_REV_MINOR_MASK,
-				   scpi_info->firmware_version),
+				   scpi_drvinfo->firmware_version),
 			 FIELD_GET(FW_REV_PATCH_MASK,
-				   scpi_info->firmware_version));
-	scpi_info->scpi_ops = &scpi_ops;
+				   scpi_drvinfo->firmware_version));
+
+	scpi_drvinfo->scpi_ops = &scpi_ops;
 
-	return devm_of_platform_populate(dev);
+	ret = devm_of_platform_populate(dev);
+	if (ret)
+		scpi_info = NULL;
+
+	return ret;
 }
 
 static const struct of_device_id scpi_of_match[] = {


                 reply	other threads:[~2022-08-15 11:48 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=166056411623254@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=huhai@kylinos.cn \
    --cc=liuyun01@kylinos.cn \
    --cc=stable@vger.kernel.org \
    --cc=sudeep.holla@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.