From: <gregkh@linuxfoundation.org>
To: rodrigo.vivi@intel.com, ashutosh.dixit@intel.com,
stable@vger.kernel.org, sushma.venkatesh.reddy@intel.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] drm/i915/slpc: Let's fix the PCODE min freq table setup for" failed to apply to 5.15-stable tree
Date: Sat, 10 Sep 2022 08:29:54 +0200 [thread overview]
Message-ID: <166279139419416@kroah.com> (raw)
The patch below does not apply to the 5.15-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
Possible dependencies:
e1cab970574c ("drm/i915/slpc: Let's fix the PCODE min freq table setup for SLPC")
4dd4375bc4ff ("drm/i915: split out intel_pcode.[ch] to separate file")
1eecf31e3c96 ("drm/i915: split out vlv sideband to a separate file")
5f5ada0bae45 ("drm/i915: De-wrapper bxt_ddi_phy_set_signal_levels()")
193299ad9d85 ("drm/i915: Nuke useless .set_signal_levels() wrappers")
e722ab8b6968 ("drm/i915: Generalize .set_signal_levels()")
5bafd85dd770 ("drm/i915: Introduce has_buf_trans_select()")
f820693bc238 ("drm/i915: Introduce has_iboost()")
80e77e30a212 ("drm/i915/dpll: move dpll modeset asserts to intel_dpll.c")
aa0813b1ba31 ("drm/i915/pps: move pps (panel) modeset asserts to intel_pps.c")
e04a911f4366 ("drm/i915/fdi: move fdi modeset asserts to intel_fdi.c")
e505d76404b1 ("drm/i915: s/ddi_translations/trans/")
4360a2b54fd7 ("drm/i915/display: add intel_fdi_link_train wrapper.")
8c66081b0b32 ("drm/i915: s/pipe/transcoder/ when dealing with PIPECONF/TRANSCONF")
a338847abc8e ("drm/i915: Call {vlv,chv}_prepare_pll() from {vlv,chv}_enable_pll()")
510e890e8222 ("drm/i915: Remove the 'reg' local variable")
8a3b3df39757 ("drm/i915: Clean up variable names in old dpll functions")
6205372b4b6d ("drm/i915: Clean dpll calling convention")
24951b5813c1 ("drm/i915: Constify struct dpll all over")
b294425e9091 ("drm/i915: Extract ilk_update_pll_dividers()")
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e1cab970574c001d83e59ca8388c474a57a1afb6 Mon Sep 17 00:00:00 2001
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Date: Wed, 31 Aug 2022 17:45:38 -0400
Subject: [PATCH] drm/i915/slpc: Let's fix the PCODE min freq table setup for
SLPC
We need to inform PCODE of a desired ring frequencies so PCODE update
the memory frequencies to us. rps->min_freq and rps->max_freq are the
frequencies used in that request. However they were unset when SLPC was
enabled and PCODE never updated the memory freq.
v2 (as Suggested by Ashutosh): if SLPC is in use, let's pick the right
frequencies from the get_ia_constants instead of the fake init of
rps' min and max.
v3: don't forget the max <= min return
v4: Move all the freq conversion to intel_rps.c. And the max <= min
check to where it belongs.
v5: (Ashutosh) Fix old comment s/50 HZ/50 MHz and add a doc explaining
the "raw format"
Fixes: 7ba79a671568 ("drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Tested-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831214538.143950-1-rodrigo.vivi@intel.com
(cherry picked from commit 018a7bdbb090b9155a6509a0d1a684db4afaa5b1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
diff --git a/drivers/gpu/drm/i915/gt/intel_llc.c b/drivers/gpu/drm/i915/gt/intel_llc.c
index 14fe65812e42..1d19c073ba2e 100644
--- a/drivers/gpu/drm/i915/gt/intel_llc.c
+++ b/drivers/gpu/drm/i915/gt/intel_llc.c
@@ -12,6 +12,7 @@
#include "intel_llc.h"
#include "intel_mchbar_regs.h"
#include "intel_pcode.h"
+#include "intel_rps.h"
struct ia_constants {
unsigned int min_gpu_freq;
@@ -55,9 +56,6 @@ static bool get_ia_constants(struct intel_llc *llc,
if (!HAS_LLC(i915) || IS_DGFX(i915))
return false;
- if (rps->max_freq <= rps->min_freq)
- return false;
-
consts->max_ia_freq = cpu_max_MHz();
consts->min_ring_freq =
@@ -65,13 +63,8 @@ static bool get_ia_constants(struct intel_llc *llc,
/* convert DDR frequency from units of 266.6MHz to bandwidth */
consts->min_ring_freq = mult_frac(consts->min_ring_freq, 8, 3);
- consts->min_gpu_freq = rps->min_freq;
- consts->max_gpu_freq = rps->max_freq;
- if (GRAPHICS_VER(i915) >= 9) {
- /* Convert GT frequency to 50 HZ units */
- consts->min_gpu_freq /= GEN9_FREQ_SCALER;
- consts->max_gpu_freq /= GEN9_FREQ_SCALER;
- }
+ consts->min_gpu_freq = intel_rps_get_min_raw_freq(rps);
+ consts->max_gpu_freq = intel_rps_get_max_raw_freq(rps);
return true;
}
@@ -130,6 +123,12 @@ static void gen6_update_ring_freq(struct intel_llc *llc)
if (!get_ia_constants(llc, &consts))
return;
+ /*
+ * Although this is unlikely on any platform during initialization,
+ * let's ensure we don't get accidentally into infinite loop
+ */
+ if (consts.max_gpu_freq <= consts.min_gpu_freq)
+ return;
/*
* For each potential GPU frequency, load a ring frequency we'd like
* to use for memory access. We do this by specifying the IA frequency
diff --git a/drivers/gpu/drm/i915/gt/intel_rps.c b/drivers/gpu/drm/i915/gt/intel_rps.c
index fb3f57ee450b..7bb967034679 100644
--- a/drivers/gpu/drm/i915/gt/intel_rps.c
+++ b/drivers/gpu/drm/i915/gt/intel_rps.c
@@ -2126,6 +2126,31 @@ u32 intel_rps_get_max_frequency(struct intel_rps *rps)
return intel_gpu_freq(rps, rps->max_freq_softlimit);
}
+/**
+ * intel_rps_get_max_raw_freq - returns the max frequency in some raw format.
+ * @rps: the intel_rps structure
+ *
+ * Returns the max frequency in a raw format. In newer platforms raw is in
+ * units of 50 MHz.
+ */
+u32 intel_rps_get_max_raw_freq(struct intel_rps *rps)
+{
+ struct intel_guc_slpc *slpc = rps_to_slpc(rps);
+ u32 freq;
+
+ if (rps_uses_slpc(rps)) {
+ return DIV_ROUND_CLOSEST(slpc->rp0_freq,
+ GT_FREQUENCY_MULTIPLIER);
+ } else {
+ freq = rps->max_freq;
+ if (GRAPHICS_VER(rps_to_i915(rps)) >= 9) {
+ /* Convert GT frequency to 50 MHz units */
+ freq /= GEN9_FREQ_SCALER;
+ }
+ return freq;
+ }
+}
+
u32 intel_rps_get_rp0_frequency(struct intel_rps *rps)
{
struct intel_guc_slpc *slpc = rps_to_slpc(rps);
@@ -2214,6 +2239,31 @@ u32 intel_rps_get_min_frequency(struct intel_rps *rps)
return intel_gpu_freq(rps, rps->min_freq_softlimit);
}
+/**
+ * intel_rps_get_min_raw_freq - returns the min frequency in some raw format.
+ * @rps: the intel_rps structure
+ *
+ * Returns the min frequency in a raw format. In newer platforms raw is in
+ * units of 50 MHz.
+ */
+u32 intel_rps_get_min_raw_freq(struct intel_rps *rps)
+{
+ struct intel_guc_slpc *slpc = rps_to_slpc(rps);
+ u32 freq;
+
+ if (rps_uses_slpc(rps)) {
+ return DIV_ROUND_CLOSEST(slpc->min_freq,
+ GT_FREQUENCY_MULTIPLIER);
+ } else {
+ freq = rps->min_freq;
+ if (GRAPHICS_VER(rps_to_i915(rps)) >= 9) {
+ /* Convert GT frequency to 50 MHz units */
+ freq /= GEN9_FREQ_SCALER;
+ }
+ return freq;
+ }
+}
+
static int set_min_freq(struct intel_rps *rps, u32 val)
{
int ret = 0;
diff --git a/drivers/gpu/drm/i915/gt/intel_rps.h b/drivers/gpu/drm/i915/gt/intel_rps.h
index 1e8d56491308..4509dfdc52e0 100644
--- a/drivers/gpu/drm/i915/gt/intel_rps.h
+++ b/drivers/gpu/drm/i915/gt/intel_rps.h
@@ -37,8 +37,10 @@ u32 intel_rps_get_cagf(struct intel_rps *rps, u32 rpstat1);
u32 intel_rps_read_actual_frequency(struct intel_rps *rps);
u32 intel_rps_get_requested_frequency(struct intel_rps *rps);
u32 intel_rps_get_min_frequency(struct intel_rps *rps);
+u32 intel_rps_get_min_raw_freq(struct intel_rps *rps);
int intel_rps_set_min_frequency(struct intel_rps *rps, u32 val);
u32 intel_rps_get_max_frequency(struct intel_rps *rps);
+u32 intel_rps_get_max_raw_freq(struct intel_rps *rps);
int intel_rps_set_max_frequency(struct intel_rps *rps, u32 val);
u32 intel_rps_get_rp0_frequency(struct intel_rps *rps);
u32 intel_rps_get_rp1_frequency(struct intel_rps *rps);
reply other threads:[~2022-09-10 6:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=166279139419416@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=ashutosh.dixit@intel.com \
--cc=rodrigo.vivi@intel.com \
--cc=stable@vger.kernel.org \
--cc=sushma.venkatesh.reddy@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.