All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nic Chautru <nicolas.chautru@intel.com>
To: dev@dpdk.org, thomas@monjalon.net
Cc: maxime.coquelin@redhat.com, trix@redhat.com, mdr@ashroe.eu,
	bruce.richardson@intel.com, hemant.agrawal@nxp.com,
	david.marchand@redhat.com, stephen@networkplumber.org,
	hernan.vargas@intel.com,
	Nicolas Chautru <nicolas.chautru@intel.com>
Subject: [PATCH v3 07/13] baseband/acc200: add LTE processing functions
Date: Thu, 15 Sep 2022 18:35:00 -0700	[thread overview]
Message-ID: <1663292106-45320-8-git-send-email-nicolas.chautru@intel.com> (raw)
In-Reply-To: <1663292106-45320-1-git-send-email-nicolas.chautru@intel.com>

From: Nicolas Chautru <nicolas.chautru@intel.com>

Add functions and capability for 4G FEC

Signed-off-by: Nicolas Chautru <nicolas.chautru@intel.com>
---
 drivers/baseband/acc200/rte_acc200_pmd.c | 894 ++++++++++++++++++++++++++++++-
 1 file changed, 874 insertions(+), 20 deletions(-)

diff --git a/drivers/baseband/acc200/rte_acc200_pmd.c b/drivers/baseband/acc200/rte_acc200_pmd.c
index def5ed7..9c3388f 100644
--- a/drivers/baseband/acc200/rte_acc200_pmd.c
+++ b/drivers/baseband/acc200/rte_acc200_pmd.c
@@ -641,6 +641,46 @@
 	int i;
 	static const struct rte_bbdev_op_cap bbdev_capabilities[] = {
 		{
+			.type = RTE_BBDEV_OP_TURBO_DEC,
+			.cap.turbo_dec = {
+				.capability_flags =
+					RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE |
+					RTE_BBDEV_TURBO_CRC_TYPE_24B |
+					RTE_BBDEV_TURBO_EQUALIZER |
+					RTE_BBDEV_TURBO_SOFT_OUT_SATURATE |
+					RTE_BBDEV_TURBO_HALF_ITERATION_EVEN |
+					RTE_BBDEV_TURBO_CONTINUE_CRC_MATCH |
+					RTE_BBDEV_TURBO_SOFT_OUTPUT |
+					RTE_BBDEV_TURBO_EARLY_TERMINATION |
+					RTE_BBDEV_TURBO_NEG_LLR_1_BIT_IN |
+					RTE_BBDEV_TURBO_NEG_LLR_1_BIT_SOFT_OUT |
+					RTE_BBDEV_TURBO_MAP_DEC |
+					RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP |
+					RTE_BBDEV_TURBO_DEC_SCATTER_GATHER,
+				.max_llr_modulus = INT8_MAX,
+				.num_buffers_src =
+						RTE_BBDEV_TURBO_MAX_CODE_BLOCKS,
+				.num_buffers_hard_out =
+						RTE_BBDEV_TURBO_MAX_CODE_BLOCKS,
+				.num_buffers_soft_out =
+						RTE_BBDEV_TURBO_MAX_CODE_BLOCKS,
+			}
+		},
+		{
+			.type = RTE_BBDEV_OP_TURBO_ENC,
+			.cap.turbo_enc = {
+				.capability_flags =
+					RTE_BBDEV_TURBO_CRC_24B_ATTACH |
+					RTE_BBDEV_TURBO_RV_INDEX_BYPASS |
+					RTE_BBDEV_TURBO_RATE_MATCH |
+					RTE_BBDEV_TURBO_ENC_SCATTER_GATHER,
+				.num_buffers_src =
+						RTE_BBDEV_TURBO_MAX_CODE_BLOCKS,
+				.num_buffers_dst =
+						RTE_BBDEV_TURBO_MAX_CODE_BLOCKS,
+			}
+		},
+		{
 			.type   = RTE_BBDEV_OP_LDPC_ENC,
 			.cap.ldpc_enc = {
 				.capability_flags =
@@ -691,15 +731,17 @@
 
 	/* Exposed number of queues */
 	dev_info->num_queues[RTE_BBDEV_OP_NONE] = 0;
-	dev_info->num_queues[RTE_BBDEV_OP_TURBO_DEC] = 0;
-	dev_info->num_queues[RTE_BBDEV_OP_TURBO_ENC] = 0;
+	dev_info->num_queues[RTE_BBDEV_OP_TURBO_DEC] = d->acc_conf.q_ul_4g.num_aqs_per_groups *
+			d->acc_conf.q_ul_4g.num_qgroups;
+	dev_info->num_queues[RTE_BBDEV_OP_TURBO_ENC] = d->acc_conf.q_dl_4g.num_aqs_per_groups *
+			d->acc_conf.q_dl_4g.num_qgroups;
 	dev_info->num_queues[RTE_BBDEV_OP_LDPC_DEC] = d->acc_conf.q_ul_5g.num_aqs_per_groups *
 			d->acc_conf.q_ul_5g.num_qgroups;
 	dev_info->num_queues[RTE_BBDEV_OP_LDPC_ENC] = d->acc_conf.q_dl_5g.num_aqs_per_groups *
 			d->acc_conf.q_dl_5g.num_qgroups;
 	dev_info->num_queues[RTE_BBDEV_OP_FFT] = 0;
-	dev_info->queue_priority[RTE_BBDEV_OP_TURBO_DEC] = 0;
-	dev_info->queue_priority[RTE_BBDEV_OP_TURBO_ENC] = 0;
+	dev_info->queue_priority[RTE_BBDEV_OP_TURBO_DEC] = d->acc_conf.q_ul_4g.num_qgroups;
+	dev_info->queue_priority[RTE_BBDEV_OP_TURBO_ENC] = d->acc_conf.q_dl_4g.num_qgroups;
 	dev_info->queue_priority[RTE_BBDEV_OP_LDPC_DEC] = d->acc_conf.q_ul_5g.num_qgroups;
 	dev_info->queue_priority[RTE_BBDEV_OP_LDPC_ENC] = d->acc_conf.q_dl_5g.num_qgroups;
 	dev_info->queue_priority[RTE_BBDEV_OP_FFT] = 0;
@@ -744,6 +786,70 @@
 	{.device_id = 0},
 };
 
+/* Fill in a frame control word for turbo decoding. */
+static inline void
+acc200_fcw_td_fill(const struct rte_bbdev_dec_op *op, struct acc_fcw_td *fcw)
+{
+	fcw->fcw_ver = 1;
+	fcw->num_maps = ACC_FCW_TD_AUTOMAP;
+	fcw->bypass_sb_deint = !check_bit(op->turbo_dec.op_flags,
+			RTE_BBDEV_TURBO_SUBBLOCK_DEINTERLEAVE);
+	if (op->turbo_dec.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK) {
+		/* FIXME for TB block */
+		fcw->k_pos = op->turbo_dec.tb_params.k_pos;
+		fcw->k_neg = op->turbo_dec.tb_params.k_neg;
+	} else {
+		fcw->k_pos = op->turbo_dec.cb_params.k;
+		fcw->k_neg = op->turbo_dec.cb_params.k;
+	}
+	fcw->c = 1;
+	fcw->c_neg = 1;
+	if (check_bit(op->turbo_dec.op_flags, RTE_BBDEV_TURBO_SOFT_OUTPUT)) {
+		fcw->soft_output_en = 1;
+		fcw->sw_soft_out_dis = 0;
+		fcw->sw_et_cont = check_bit(op->turbo_dec.op_flags,
+				RTE_BBDEV_TURBO_CONTINUE_CRC_MATCH);
+		fcw->sw_soft_out_saturation = check_bit(op->turbo_dec.op_flags,
+				RTE_BBDEV_TURBO_SOFT_OUT_SATURATE);
+		if (check_bit(op->turbo_dec.op_flags,
+				RTE_BBDEV_TURBO_EQUALIZER)) {
+			fcw->bypass_teq = 0;
+			fcw->ea = op->turbo_dec.cb_params.e;
+			fcw->eb = op->turbo_dec.cb_params.e;
+			if (op->turbo_dec.rv_index == 0)
+				fcw->k0_start_col = ACC_FCW_TD_RVIDX_0;
+			else if (op->turbo_dec.rv_index == 1)
+				fcw->k0_start_col = ACC_FCW_TD_RVIDX_1;
+			else if (op->turbo_dec.rv_index == 2)
+				fcw->k0_start_col = ACC_FCW_TD_RVIDX_2;
+			else
+				fcw->k0_start_col = ACC_FCW_TD_RVIDX_3;
+		} else {
+			fcw->bypass_teq = 1;
+			fcw->eb = 64; /* avoid undefined value */
+		}
+	} else {
+		fcw->soft_output_en = 0;
+		fcw->sw_soft_out_dis = 1;
+		fcw->bypass_teq = 0;
+	}
+
+	fcw->code_block_mode = 1; /* FIXME */
+	fcw->turbo_crc_type = check_bit(op->turbo_dec.op_flags,
+			RTE_BBDEV_TURBO_CRC_TYPE_24B);
+
+	fcw->ext_td_cold_reg_en = 1;
+	fcw->raw_decoder_input_on = 0;
+	fcw->max_iter = RTE_MAX((uint8_t) op->turbo_dec.iter_max, 2);
+	fcw->min_iter = 2;
+	fcw->half_iter_on = !check_bit(op->turbo_dec.op_flags,
+			RTE_BBDEV_TURBO_HALF_ITERATION_EVEN);
+
+	fcw->early_stop_en = check_bit(op->turbo_dec.op_flags,
+			RTE_BBDEV_TURBO_EARLY_TERMINATION) & !fcw->soft_output_en;
+	fcw->ext_scale = 0xF;
+}
+
 /* Fill in a frame control word for LDPC decoding. */
 static inline void
 acc200_fcw_ld_fill(struct rte_bbdev_dec_op *op, struct acc_fcw_ld *fcw,
@@ -870,6 +976,89 @@
 }
 
 static inline int
+acc200_dma_desc_te_fill(struct rte_bbdev_enc_op *op,
+		struct acc_dma_req_desc *desc, struct rte_mbuf **input,
+		struct rte_mbuf *output, uint32_t *in_offset,
+		uint32_t *out_offset, uint32_t *out_length,
+		uint32_t *mbuf_total_left, uint32_t *seg_total_left, uint8_t r)
+{
+	int next_triplet = 1; /* FCW already done */
+	uint32_t e, ea, eb, length;
+	uint16_t k, k_neg, k_pos;
+	uint8_t cab, c_neg;
+
+	desc->word0 = ACC_DMA_DESC_TYPE;
+	desc->word1 = 0; /**< Timestamp could be disabled */
+	desc->word2 = 0;
+	desc->word3 = 0;
+	desc->numCBs = 1;
+
+	if (op->turbo_enc.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK) {
+		ea = op->turbo_enc.tb_params.ea;
+		eb = op->turbo_enc.tb_params.eb;
+		cab = op->turbo_enc.tb_params.cab;
+		k_neg = op->turbo_enc.tb_params.k_neg;
+		k_pos = op->turbo_enc.tb_params.k_pos;
+		c_neg = op->turbo_enc.tb_params.c_neg;
+		e = (r < cab) ? ea : eb;
+		k = (r < c_neg) ? k_neg : k_pos;
+	} else {
+		e = op->turbo_enc.cb_params.e;
+		k = op->turbo_enc.cb_params.k;
+	}
+
+	if (check_bit(op->turbo_enc.op_flags, RTE_BBDEV_TURBO_CRC_24B_ATTACH))
+		length = (k - 24) >> 3;
+	else
+		length = k >> 3;
+
+	if (unlikely((*mbuf_total_left == 0) || (*mbuf_total_left < length))) {
+		rte_bbdev_log(ERR,
+				"Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
+				*mbuf_total_left, length);
+		return -1;
+	}
+
+	next_triplet = acc_dma_fill_blk_type_in(desc, input, in_offset,
+			length, seg_total_left, next_triplet,
+			check_bit(op->turbo_enc.op_flags,
+			RTE_BBDEV_TURBO_ENC_SCATTER_GATHER));
+	if (unlikely(next_triplet < 0)) {
+		rte_bbdev_log(ERR,
+				"Mismatch between data to process and mbuf data length in bbdev_op: %p",
+				op);
+		return -1;
+	}
+	desc->data_ptrs[next_triplet - 1].last = 1;
+	desc->m2dlen = next_triplet;
+	*mbuf_total_left -= length;
+
+	/* Set output length */
+	if (check_bit(op->turbo_enc.op_flags, RTE_BBDEV_TURBO_RATE_MATCH))
+		/* Integer round up division by 8 */
+		*out_length = (e + 7) >> 3;
+	else
+		*out_length = (k >> 3) * 3 + 2;
+
+	next_triplet = acc_dma_fill_blk_type(desc, output, *out_offset,
+			*out_length, next_triplet, ACC_DMA_BLKID_OUT_ENC);
+	if (unlikely(next_triplet < 0)) {
+		rte_bbdev_log(ERR,
+				"Mismatch between data to process and mbuf data length in bbdev_op: %p",
+				op);
+		return -1;
+	}
+	op->turbo_enc.output.length += *out_length;
+	*out_offset += *out_length;
+	desc->data_ptrs[next_triplet - 1].last = 1;
+	desc->d2mlen = next_triplet - desc->m2dlen;
+
+	desc->op_addr = op;
+
+	return 0;
+}
+
+static inline int
 acc200_dma_desc_le_fill(struct rte_bbdev_enc_op *op,
 		struct acc_dma_req_desc *desc, struct rte_mbuf **input,
 		struct rte_mbuf *output, uint32_t *in_offset,
@@ -929,6 +1118,122 @@
 }
 
 static inline int
+acc200_dma_desc_td_fill(struct rte_bbdev_dec_op *op,
+		struct acc_dma_req_desc *desc, struct rte_mbuf **input,
+		struct rte_mbuf *h_output, struct rte_mbuf *s_output,
+		uint32_t *in_offset, uint32_t *h_out_offset,
+		uint32_t *s_out_offset, uint32_t *h_out_length,
+		uint32_t *s_out_length, uint32_t *mbuf_total_left,
+		uint32_t *seg_total_left, uint8_t r)
+{
+	int next_triplet = 1; /* FCW already done */
+	uint16_t k;
+	uint16_t crc24_overlap = 0;
+	uint32_t e, kw;
+
+	desc->word0 = ACC_DMA_DESC_TYPE;
+	desc->word1 = 0; /**< Timestamp could be disabled */
+	desc->word2 = 0;
+	desc->word3 = 0;
+	desc->numCBs = 1;
+
+	if (op->turbo_dec.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK) {
+		k = (r < op->turbo_dec.tb_params.c_neg)
+			? op->turbo_dec.tb_params.k_neg
+			: op->turbo_dec.tb_params.k_pos;
+		e = (r < op->turbo_dec.tb_params.cab)
+			? op->turbo_dec.tb_params.ea
+			: op->turbo_dec.tb_params.eb;
+	} else {
+		k = op->turbo_dec.cb_params.k;
+		e = op->turbo_dec.cb_params.e;
+	}
+
+	if ((op->turbo_dec.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK)
+		&& !check_bit(op->turbo_dec.op_flags,
+		RTE_BBDEV_TURBO_DEC_TB_CRC_24B_KEEP))
+		crc24_overlap = 24;
+
+	/* Calculates circular buffer size.
+	 * According to 3gpp 36.212 section 5.1.4.2
+	 *   Kw = 3 * Kpi,
+	 * where:
+	 *   Kpi = nCol * nRow
+	 * where nCol is 32 and nRow can be calculated from:
+	 *   D =< nCol * nRow
+	 * where D is the size of each output from turbo encoder block (k + 4).
+	 */
+	kw = RTE_ALIGN_CEIL(k + 4, 32) * 3;
+
+	if (unlikely((*mbuf_total_left == 0) || (*mbuf_total_left < kw))) {
+		rte_bbdev_log(ERR,
+				"Mismatch between mbuf length and included CB sizes: mbuf len %u, cb len %u",
+				*mbuf_total_left, kw);
+		return -1;
+	}
+
+	next_triplet = acc_dma_fill_blk_type_in(desc, input, in_offset, kw,
+			seg_total_left, next_triplet,
+			check_bit(op->turbo_dec.op_flags,
+			RTE_BBDEV_TURBO_DEC_SCATTER_GATHER));
+	if (unlikely(next_triplet < 0)) {
+		rte_bbdev_log(ERR,
+				"Mismatch between data to process and mbuf data length in bbdev_op: %p",
+				op);
+		return -1;
+	}
+	desc->data_ptrs[next_triplet - 1].last = 1;
+	desc->m2dlen = next_triplet;
+	*mbuf_total_left -= kw;
+	*h_out_length = ((k - crc24_overlap) >> 3);
+	next_triplet = acc_dma_fill_blk_type(
+			desc, h_output, *h_out_offset,
+			*h_out_length, next_triplet, ACC_DMA_BLKID_OUT_HARD);
+	if (unlikely(next_triplet < 0)) {
+		rte_bbdev_log(ERR,
+				"Mismatch between data to process and mbuf data length in bbdev_op: %p",
+				op);
+		return -1;
+	}
+
+	op->turbo_dec.hard_output.length += *h_out_length;
+	*h_out_offset += *h_out_length;
+
+	/* Soft output */
+	if (check_bit(op->turbo_dec.op_flags, RTE_BBDEV_TURBO_SOFT_OUTPUT)) {
+		if (op->turbo_dec.soft_output.data == 0) {
+			rte_bbdev_log(ERR, "Soft output is not defined");
+			return -1;
+		}
+		if (check_bit(op->turbo_dec.op_flags,
+				RTE_BBDEV_TURBO_EQUALIZER))
+			*s_out_length = e;
+		else
+			*s_out_length = (k * 3) + 12;
+
+		next_triplet = acc_dma_fill_blk_type(desc, s_output,
+				*s_out_offset, *s_out_length, next_triplet,
+				ACC_DMA_BLKID_OUT_SOFT);
+		if (unlikely(next_triplet < 0)) {
+			rte_bbdev_log(ERR,
+					"Mismatch between data to process and mbuf data length in bbdev_op: %p",
+					op);
+			return -1;
+		}
+
+		op->turbo_dec.soft_output.length += *s_out_length;
+		*s_out_offset += *s_out_length;
+	}
+
+	desc->data_ptrs[next_triplet - 1].last = 1;
+	desc->d2mlen = next_triplet - desc->m2dlen;
+
+	desc->op_addr = op;
+
+	return 0;
+}
+
+static inline int
 acc200_dma_desc_ld_fill(struct rte_bbdev_dec_op *op,
 		struct acc_dma_req_desc *desc,
 		struct rte_mbuf **input, struct rte_mbuf *h_output,
@@ -1100,6 +1405,51 @@
 	desc->op_addr = op;
 }
 
+/* Enqueue one encode operations for ACC200 device in CB mode */
+static inline int
+enqueue_enc_one_op_cb(struct acc_queue *q, struct rte_bbdev_enc_op *op,
+		uint16_t total_enqueued_cbs)
+{
+	union acc_dma_desc *desc = NULL;
+	int ret;
+	uint32_t in_offset, out_offset, out_length, mbuf_total_left,
+		seg_total_left;
+	struct rte_mbuf *input, *output_head, *output;
+
+	uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
+			& q->sw_ring_wrap_mask);
+	desc = q->ring_addr + desc_idx;
+	acc_fcw_te_fill(op, &desc->req.fcw_te);
+
+	input = op->turbo_enc.input.data;
+	output_head = output = op->turbo_enc.output.data;
+	in_offset = op->turbo_enc.input.offset;
+	out_offset = op->turbo_enc.output.offset;
+	out_length = 0;
+	mbuf_total_left = op->turbo_enc.input.length;
+	seg_total_left = rte_pktmbuf_data_len(op->turbo_enc.input.data)
+			- in_offset;
+
+	ret = acc200_dma_desc_te_fill(op, &desc->req, &input, output,
+			&in_offset, &out_offset, &out_length, &mbuf_total_left,
+			&seg_total_left, 0);
+
+	if (unlikely(ret < 0))
+		return ret;
+
+	mbuf_append(output_head, output, out_length);
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	rte_memdump(stderr, "FCW", &desc->req.fcw_te,
+			sizeof(desc->req.fcw_te) - 8);
+	rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
+	if (check_mbuf_total_left(mbuf_total_left) != 0)
+		return -EINVAL;
+#endif
+	/* One CB (one op) was successfully prepared to enqueue */
+	return 1;
+}
+
 /* Enqueue one encode operations for ACC200 device in CB mode
  * multiplexed on the same descriptor
  */
@@ -1262,6 +1612,84 @@
 	return 1;
 }
 
+
+/* Enqueue one encode operations for ACC200 device in TB mode. */
+static inline int
+enqueue_enc_one_op_tb(struct acc_queue *q, struct rte_bbdev_enc_op *op,
+		uint16_t total_enqueued_cbs, uint8_t cbs_in_tb)
+{
+	union acc_dma_desc *desc = NULL;
+	int ret;
+	uint8_t r, c;
+	uint32_t in_offset, out_offset, out_length, mbuf_total_left,
+		seg_total_left;
+	struct rte_mbuf *input, *output_head, *output;
+	uint16_t current_enqueued_cbs = 0;
+
+	uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
+			& q->sw_ring_wrap_mask);
+	desc = q->ring_addr + desc_idx;
+	uint64_t fcw_offset = (desc_idx << 8) + ACC_DESC_FCW_OFFSET;
+	acc_fcw_te_fill(op, &desc->req.fcw_te);
+
+	input = op->turbo_enc.input.data;
+	output_head = output = op->turbo_enc.output.data;
+	in_offset = op->turbo_enc.input.offset;
+	out_offset = op->turbo_enc.output.offset;
+	out_length = 0;
+	mbuf_total_left = op->turbo_enc.input.length;
+
+	c = op->turbo_enc.tb_params.c;
+	r = op->turbo_enc.tb_params.r;
+
+	while (mbuf_total_left > 0 && r < c) {
+		seg_total_left = rte_pktmbuf_data_len(input) - in_offset;
+		/* Set up DMA descriptor */
+		desc = q->ring_addr + ((q->sw_ring_head + total_enqueued_cbs)
+				& q->sw_ring_wrap_mask);
+		desc->req.data_ptrs[0].address = q->ring_addr_iova + fcw_offset;
+		desc->req.data_ptrs[0].blen = ACC_FCW_TE_BLEN;
+
+		ret = acc200_dma_desc_te_fill(op, &desc->req, &input, output,
+				&in_offset, &out_offset, &out_length,
+				&mbuf_total_left, &seg_total_left, r);
+		if (unlikely(ret < 0))
+			return ret;
+		mbuf_append(output_head, output, out_length);
+
+		/* Set total number of CBs in TB */
+		desc->req.cbs_in_tb = cbs_in_tb;
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+		rte_memdump(stderr, "FCW", &desc->req.fcw_te,
+				sizeof(desc->req.fcw_te) - 8);
+		rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
+#endif
+
+		if (seg_total_left == 0) {
+			/* Go to the next mbuf */
+			input = input->next;
+			in_offset = 0;
+			output = output->next;
+			out_offset = 0;
+		}
+
+		total_enqueued_cbs++;
+		current_enqueued_cbs++;
+		r++;
+	}
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	if (check_mbuf_total_left(mbuf_total_left) != 0)
+		return -EINVAL;
+#endif
+
+	/* Set SDone on last CB descriptor for TB mode. */
+	desc->req.sdone_enable = 1;
+	desc->req.irq_enable = q->irq_enable;
+
+	return current_enqueued_cbs;
+}
+
 /* Enqueue one encode operations for ACC200 device in TB mode.
  * returns the number of descs used
  */
@@ -1328,6 +1756,69 @@
 
 /** Enqueue one decode operations for ACC200 device in CB mode */
 static inline int
+enqueue_dec_one_op_cb(struct acc_queue *q, struct rte_bbdev_dec_op *op,
+		uint16_t total_enqueued_cbs)
+{
+	union acc_dma_desc *desc = NULL;
+	int ret;
+	uint32_t in_offset, h_out_offset, s_out_offset, s_out_length,
+		h_out_length, mbuf_total_left, seg_total_left;
+	struct rte_mbuf *input, *h_output_head, *h_output,
+		*s_output_head, *s_output;
+
+	uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
+			& q->sw_ring_wrap_mask);
+	desc = q->ring_addr + desc_idx;
+	acc200_fcw_td_fill(op, &desc->req.fcw_td);
+
+	input = op->turbo_dec.input.data;
+	h_output_head = h_output = op->turbo_dec.hard_output.data;
+	s_output_head = s_output = op->turbo_dec.soft_output.data;
+	in_offset = op->turbo_dec.input.offset;
+	h_out_offset = op->turbo_dec.hard_output.offset;
+	s_out_offset = op->turbo_dec.soft_output.offset;
+	h_out_length = s_out_length = 0;
+	mbuf_total_left = op->turbo_dec.input.length;
+	seg_total_left = rte_pktmbuf_data_len(input) - in_offset;
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	if (unlikely(input == NULL)) {
+		rte_bbdev_log(ERR, "Invalid mbuf pointer");
+		return -EFAULT;
+	}
+#endif
+
+	/* Set up DMA descriptor */
+	desc = q->ring_addr + ((q->sw_ring_head + total_enqueued_cbs)
+			& q->sw_ring_wrap_mask);
+
+	ret = acc200_dma_desc_td_fill(op, &desc->req, &input, h_output,
+			s_output, &in_offset, &h_out_offset, &s_out_offset,
+			&h_out_length, &s_out_length, &mbuf_total_left,
+			&seg_total_left, 0);
+
+	if (unlikely(ret < 0))
+		return ret;
+
+	/* Hard output */
+	mbuf_append(h_output_head, h_output, h_out_length);
+
+	/* Soft output */
+	if (check_bit(op->turbo_dec.op_flags, RTE_BBDEV_TURBO_SOFT_OUTPUT))
+		mbuf_append(s_output_head, s_output, s_out_length);
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	rte_memdump(stderr, "FCW", &desc->req.fcw_td,
+			sizeof(desc->req.fcw_td));
+	rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
+#endif
+
+	/* One CB (one op) was successfully prepared to enqueue */
+	return 1;
+}
+
+/** Enqueue one decode operations for ACC200 device in CB mode */
+static inline int
 enqueue_ldpc_dec_one_op_cb(struct acc_queue *q, struct rte_bbdev_dec_op *op,
 		uint16_t total_enqueued_cbs, bool same_op)
 {
@@ -1525,10 +2016,147 @@
 	return current_enqueued_cbs;
 }
 
-/** Enqueue encode operations for ACC200 device in CB mode. */
-static inline uint16_t
-acc200_enqueue_ldpc_enc_cb(struct rte_bbdev_queue_data *q_data,
-		struct rte_bbdev_enc_op **ops, uint16_t num)
+/* Enqueue one decode operations for ACC200 device in TB mode */
+static inline int
+enqueue_dec_one_op_tb(struct acc_queue *q, struct rte_bbdev_dec_op *op,
+		uint16_t total_enqueued_cbs, uint8_t cbs_in_tb)
+{
+	union acc_dma_desc *desc = NULL;
+	int ret;
+	uint8_t r, c;
+	uint32_t in_offset, h_out_offset, s_out_offset, s_out_length,
+		h_out_length, mbuf_total_left, seg_total_left;
+	struct rte_mbuf *input, *h_output_head, *h_output,
+		*s_output_head, *s_output;
+	uint16_t current_enqueued_cbs = 0;
+
+	uint16_t desc_idx = ((q->sw_ring_head + total_enqueued_cbs)
+			& q->sw_ring_wrap_mask);
+	desc = q->ring_addr + desc_idx;
+	uint64_t fcw_offset = (desc_idx << 8) + ACC_DESC_FCW_OFFSET;
+	acc200_fcw_td_fill(op, &desc->req.fcw_td);
+
+	input = op->turbo_dec.input.data;
+	h_output_head = h_output = op->turbo_dec.hard_output.data;
+	s_output_head = s_output = op->turbo_dec.soft_output.data;
+	in_offset = op->turbo_dec.input.offset;
+	h_out_offset = op->turbo_dec.hard_output.offset;
+	s_out_offset = op->turbo_dec.soft_output.offset;
+	h_out_length = s_out_length = 0;
+	mbuf_total_left = op->turbo_dec.input.length;
+	c = op->turbo_dec.tb_params.c;
+	r = op->turbo_dec.tb_params.r;
+
+	while (mbuf_total_left > 0 && r < c) {
+
+		seg_total_left = rte_pktmbuf_data_len(input) - in_offset;
+
+		/* Set up DMA descriptor */
+		desc = q->ring_addr + ((q->sw_ring_head + total_enqueued_cbs)
+				& q->sw_ring_wrap_mask);
+		desc->req.data_ptrs[0].address = q->ring_addr_iova + fcw_offset;
+		desc->req.data_ptrs[0].blen = ACC_FCW_TD_BLEN;
+		ret = acc200_dma_desc_td_fill(op, &desc->req, &input,
+				h_output, s_output, &in_offset, &h_out_offset,
+				&s_out_offset, &h_out_length, &s_out_length,
+				&mbuf_total_left, &seg_total_left, r);
+
+		if (unlikely(ret < 0))
+			return ret;
+
+		/* Hard output */
+		mbuf_append(h_output_head, h_output, h_out_length);
+
+		/* Soft output */
+		if (check_bit(op->turbo_dec.op_flags,
+				RTE_BBDEV_TURBO_SOFT_OUTPUT))
+			mbuf_append(s_output_head, s_output, s_out_length);
+
+		/* Set total number of CBs in TB */
+		desc->req.cbs_in_tb = cbs_in_tb;
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+		rte_memdump(stderr, "FCW", &desc->req.fcw_td,
+				sizeof(desc->req.fcw_td) - 8);
+		rte_memdump(stderr, "Req Desc.", desc, sizeof(*desc));
+#endif
+
+		if (seg_total_left == 0) {
+			/* Go to the next mbuf */
+			input = input->next;
+			in_offset = 0;
+			h_output = h_output->next;
+			h_out_offset = 0;
+
+			if (check_bit(op->turbo_dec.op_flags,
+					RTE_BBDEV_TURBO_SOFT_OUTPUT)) {
+				s_output = s_output->next;
+				s_out_offset = 0;
+			}
+		}
+
+		total_enqueued_cbs++;
+		current_enqueued_cbs++;
+		r++;
+	}
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	if (check_mbuf_total_left(mbuf_total_left) != 0)
+		return -EINVAL;
+#endif
+	/* Set SDone on last CB descriptor for TB mode */
+	desc->req.sdone_enable = 1;
+	desc->req.irq_enable = q->irq_enable;
+
+	return current_enqueued_cbs;
+}
+
+/* Enqueue encode operations for ACC200 device in CB mode. */
+static uint16_t
+acc200_enqueue_enc_cb(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+	struct acc_queue *q = q_data->queue_private;
+	int32_t avail = acc_ring_avail_enq(q);
+	uint16_t i;
+	union acc_dma_desc *desc;
+	int ret;
+
+	for (i = 0; i < num; ++i) {
+		/* Check if there are available space for further processing */
+		if (unlikely(avail - 1 < 0)) {
+			acc_enqueue_ring_full(q_data);
+			break;
+		}
+		avail -= 1;
+
+		ret = enqueue_enc_one_op_cb(q, ops[i], i);
+		if (ret < 0) {
+			acc_enqueue_invalid(q_data);
+			break;
+		}
+	}
+
+	if (unlikely(i == 0))
+		return 0; /* Nothing to enqueue */
+
+	/* Set SDone in last CB in enqueued ops for CB mode*/
+	desc = q->ring_addr + ((q->sw_ring_head + i - 1)
+			& q->sw_ring_wrap_mask);
+	desc->req.sdone_enable = 1;
+	desc->req.irq_enable = q->irq_enable;
+
+	acc_dma_enqueue(q, i, &q_data->queue_stats);
+
+	/* Update stats */
+	q_data->queue_stats.enqueued_count += i;
+	q_data->queue_stats.enqueue_err_count += num - i;
+	return i;
+}
+
+/** Enqueue encode operations for ACC200 device in CB mode. */
+static inline uint16_t
+acc200_enqueue_ldpc_enc_cb(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_enc_op **ops, uint16_t num)
 {
 	struct acc_queue *q = q_data->queue_private;
 	int32_t avail = acc_ring_avail_enq(q);
@@ -1583,6 +2211,45 @@
 	return i;
 }
 
+/* Enqueue encode operations for ACC200 device in TB mode. */
+static uint16_t
+acc200_enqueue_enc_tb(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+	struct acc_queue *q = q_data->queue_private;
+	int32_t avail = acc_ring_avail_enq(q);
+	uint16_t i, enqueued_cbs = 0;
+	uint8_t cbs_in_tb;
+	int ret;
+
+	for (i = 0; i < num; ++i) {
+		cbs_in_tb = get_num_cbs_in_tb_enc(&ops[i]->turbo_enc);
+		/* Check if there are available space for further processing */
+		if (unlikely((avail - cbs_in_tb < 0) || (cbs_in_tb == 0))) {
+			acc_enqueue_ring_full(q_data);
+			break;
+		}
+		avail -= cbs_in_tb;
+
+		ret = enqueue_enc_one_op_tb(q, ops[i], enqueued_cbs, cbs_in_tb);
+		if (ret <= 0) {
+			acc_enqueue_invalid(q_data);
+			break;
+		}
+		enqueued_cbs += ret;
+	}
+	if (unlikely(enqueued_cbs == 0))
+		return 0; /* Nothing to enqueue */
+
+	acc_dma_enqueue(q, enqueued_cbs, &q_data->queue_stats);
+
+	/* Update stats */
+	q_data->queue_stats.enqueued_count += i;
+	q_data->queue_stats.enqueue_err_count += num - i;
+
+	return i;
+}
+
 /* Enqueue LDPC encode operations for ACC200 device in TB mode. */
 static uint16_t
 acc200_enqueue_ldpc_enc_tb(struct rte_bbdev_queue_data *q_data,
@@ -1623,18 +2290,18 @@
 	return i;
 }
 
-/* Check room in AQ for the enqueues batches into Qmgr */
-static int32_t
-acc200_aq_avail(struct rte_bbdev_queue_data *q_data, uint16_t num_ops)
+/* Enqueue encode operations for ACC200 device. */
+static uint16_t
+acc200_enqueue_enc(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_enc_op **ops, uint16_t num)
 {
-	struct acc_queue *q = q_data->queue_private;
-	int32_t aq_avail = q->aq_depth -
-			((q->aq_enqueued - q->aq_dequeued +
-			ACC_MAX_QUEUE_DEPTH) % ACC_MAX_QUEUE_DEPTH)
-			- (num_ops >> 7);
-	if (aq_avail <= 0)
-		acc_enqueue_queue_full(q_data);
-	return aq_avail;
+	int32_t aq_avail = acc_aq_avail(q_data, num);
+	if (unlikely((aq_avail <= 0) || (num == 0)))
+		return 0;
+	if (ops[0]->turbo_enc.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK)
+		return acc200_enqueue_enc_tb(q_data, ops, num);
+	else
+		return acc200_enqueue_enc_cb(q_data, ops, num);
 }
 
 /* Enqueue encode operations for ACC200 device. */
@@ -1652,6 +2319,47 @@
 		return acc200_enqueue_ldpc_enc_cb(q_data, ops, num);
 }
 
+
+/* Enqueue decode operations for ACC200 device in CB mode */
+static uint16_t
+acc200_enqueue_dec_cb(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_dec_op **ops, uint16_t num)
+{
+	struct acc_queue *q = q_data->queue_private;
+	int32_t avail = acc_ring_avail_enq(q);
+	uint16_t i;
+	union acc_dma_desc *desc;
+	int ret;
+
+	for (i = 0; i < num; ++i) {
+		/* Check if there are available space for further processing */
+		if (unlikely(avail - 1 < 0))
+			break;
+		avail -= 1;
+
+		ret = enqueue_dec_one_op_cb(q, ops[i], i);
+		if (ret < 0)
+			break;
+	}
+
+	if (unlikely(i == 0))
+		return 0; /* Nothing to enqueue */
+
+	/* Set SDone in last CB in enqueued ops for CB mode*/
+	desc = q->ring_addr + ((q->sw_ring_head + i - 1)
+			& q->sw_ring_wrap_mask);
+	desc->req.sdone_enable = 1;
+	desc->req.irq_enable = q->irq_enable;
+
+	acc_dma_enqueue(q, i, &q_data->queue_stats);
+
+	/* Update stats */
+	q_data->queue_stats.enqueued_count += i;
+	q_data->queue_stats.enqueue_err_count += num - i;
+
+	return i;
+}
+
 /* Enqueue decode operations for ACC200 device in TB mode */
 static uint16_t
 acc200_enqueue_ldpc_dec_tb(struct rte_bbdev_queue_data *q_data,
@@ -1740,12 +2448,64 @@
 	return i;
 }
 
+
+/* Enqueue decode operations for ACC200 device in TB mode */
+static uint16_t
+acc200_enqueue_dec_tb(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_dec_op **ops, uint16_t num)
+{
+	struct acc_queue *q = q_data->queue_private;
+	int32_t avail = acc_ring_avail_enq(q);
+	uint16_t i, enqueued_cbs = 0;
+	uint8_t cbs_in_tb;
+	int ret;
+
+	for (i = 0; i < num; ++i) {
+		cbs_in_tb = get_num_cbs_in_tb_dec(&ops[i]->turbo_dec);
+		/* Check if there are available space for further processing */
+		if (unlikely((avail - cbs_in_tb < 0) || (cbs_in_tb == 0))) {
+			acc_enqueue_ring_full(q_data);
+			break;
+		}
+		avail -= cbs_in_tb;
+
+		ret = enqueue_dec_one_op_tb(q, ops[i], enqueued_cbs, cbs_in_tb);
+		if (ret <= 0) {
+			acc_enqueue_invalid(q_data);
+			break;
+		}
+		enqueued_cbs += ret;
+	}
+
+	acc_dma_enqueue(q, enqueued_cbs, &q_data->queue_stats);
+
+	/* Update stats */
+	q_data->queue_stats.enqueued_count += i;
+	q_data->queue_stats.enqueue_err_count += num - i;
+
+	return i;
+}
+
+/* Enqueue decode operations for ACC200 device. */
+static uint16_t
+acc200_enqueue_dec(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_dec_op **ops, uint16_t num)
+{
+	int32_t aq_avail = acc_aq_avail(q_data, num);
+	if (unlikely((aq_avail <= 0) || (num == 0)))
+		return 0;
+	if (ops[0]->turbo_dec.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK)
+		return acc200_enqueue_dec_tb(q_data, ops, num);
+	else
+		return acc200_enqueue_dec_cb(q_data, ops, num);
+}
+
 /* Enqueue decode operations for ACC200 device. */
 static uint16_t
 acc200_enqueue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
 		struct rte_bbdev_dec_op **ops, uint16_t num)
 {
-	int32_t aq_avail = acc200_aq_avail(q_data, num);
+	int32_t aq_avail = acc_aq_avail(q_data, num);
 	if (unlikely((aq_avail <= 0) || (num == 0)))
 		return 0;
 	if (ops[0]->ldpc_dec.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK)
@@ -2093,6 +2853,51 @@
 	return cb_idx;
 }
 
+/* Dequeue encode operations from ACC200 device. */
+static uint16_t
+acc200_dequeue_enc(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_enc_op **ops, uint16_t num)
+{
+	struct acc_queue *q = q_data->queue_private;
+	uint32_t avail = acc_ring_avail_deq(q);
+	uint32_t aq_dequeued = 0;
+	uint16_t i, dequeued_ops = 0, dequeued_descs = 0;
+	int ret;
+	struct rte_bbdev_enc_op *op;
+	if (avail == 0)
+		return 0;
+	op = (q->ring_addr + (q->sw_ring_tail &
+			q->sw_ring_wrap_mask))->req.op_addr;
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	if (unlikely(ops == NULL || q == NULL || op == NULL))
+		return 0;
+#endif
+	int cbm = op->turbo_enc.code_block_mode;
+
+	for (i = 0; i < num; i++) {
+		if (cbm == RTE_BBDEV_TRANSPORT_BLOCK)
+			ret = dequeue_enc_one_op_tb(q, &ops[dequeued_ops],
+					&dequeued_ops, &aq_dequeued,
+					&dequeued_descs);
+		else
+			ret = dequeue_enc_one_op_cb(q, &ops[dequeued_ops],
+					&dequeued_ops, &aq_dequeued,
+					&dequeued_descs);
+		if (ret < 0)
+			break;
+		if (dequeued_ops >= num)
+			break;
+	}
+
+	q->aq_dequeued += aq_dequeued;
+	q->sw_ring_tail += dequeued_descs;
+
+	/* Update enqueue stats */
+	q_data->queue_stats.dequeued_count += dequeued_ops;
+
+	return dequeued_ops;
+}
+
 /* Dequeue LDPC encode operations from ACC200 device. */
 static uint16_t
 acc200_dequeue_ldpc_enc(struct rte_bbdev_queue_data *q_data,
@@ -2140,6 +2945,51 @@
 
 /* Dequeue decode operations from ACC200 device. */
 static uint16_t
+acc200_dequeue_dec(struct rte_bbdev_queue_data *q_data,
+		struct rte_bbdev_dec_op **ops, uint16_t num)
+{
+	struct acc_queue *q = q_data->queue_private;
+	uint16_t dequeue_num;
+	uint32_t avail = acc_ring_avail_deq(q);
+	uint32_t aq_dequeued = 0;
+	uint16_t i;
+	uint16_t dequeued_cbs = 0;
+	struct rte_bbdev_dec_op *op;
+	int ret;
+
+#ifdef RTE_LIBRTE_BBDEV_DEBUG
+	if (unlikely(ops == 0 && q == NULL))
+		return 0;
+#endif
+
+	dequeue_num = (avail < num) ? avail : num;
+
+	for (i = 0; i < dequeue_num; ++i) {
+		op = (q->ring_addr + ((q->sw_ring_tail + dequeued_cbs)
+			& q->sw_ring_wrap_mask))->req.op_addr;
+		if (op->turbo_dec.code_block_mode == RTE_BBDEV_TRANSPORT_BLOCK)
+			ret = dequeue_dec_one_op_tb(q, &ops[i], dequeued_cbs,
+					&aq_dequeued);
+		else
+			ret = dequeue_dec_one_op_cb(q_data, q, &ops[i],
+					dequeued_cbs, &aq_dequeued);
+
+		if (ret <= 0)
+			break;
+		dequeued_cbs += ret;
+	}
+
+	q->aq_dequeued += aq_dequeued;
+	q->sw_ring_tail += dequeued_cbs;
+
+	/* Update enqueue stats */
+	q_data->queue_stats.dequeued_count += i;
+
+	return i;
+}
+
+/* Dequeue decode operations from ACC200 device. */
+static uint16_t
 acc200_dequeue_ldpc_dec(struct rte_bbdev_queue_data *q_data,
 		struct rte_bbdev_dec_op **ops, uint16_t num)
 {
@@ -2191,6 +3041,10 @@
 	struct rte_pci_device *pci_dev = RTE_DEV_TO_PCI(dev->device);
 
 	dev->dev_ops = &acc200_bbdev_ops;
+	dev->enqueue_enc_ops = acc200_enqueue_enc;
+	dev->enqueue_dec_ops = acc200_enqueue_dec;
+	dev->dequeue_enc_ops = acc200_dequeue_enc;
+	dev->dequeue_dec_ops = acc200_dequeue_dec;
 	dev->enqueue_ldpc_enc_ops = acc200_enqueue_ldpc_enc;
 	dev->enqueue_ldpc_dec_ops = acc200_enqueue_ldpc_dec;
 	dev->dequeue_ldpc_enc_ops = acc200_dequeue_ldpc_enc;
-- 
1.8.3.1


  parent reply	other threads:[~2022-09-16  1:36 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-16  1:34 From: Nic Chautru <nicolas.chautru@intel.com> Nic Chautru
2022-09-16  1:34 ` [PATCH v3 01/13] baseband/acc100: refactor to segregate common code Nic Chautru
2022-09-21  7:13   ` Maxime Coquelin
2022-09-21 21:25     ` Chautru, Nicolas
2022-09-16  1:34 ` [PATCH v3 02/13] baseband/acc200: introduce PMD for ACC200 Nic Chautru
2022-09-21  7:17   ` Maxime Coquelin
2022-09-21 23:34     ` Chautru, Nicolas
2022-09-16  1:34 ` [PATCH v3 03/13] baseband/acc200: add HW register definitions Nic Chautru
2022-09-16  1:34 ` [PATCH v3 04/13] baseband/acc200: add info get function Nic Chautru
2022-09-16  1:34 ` [PATCH v3 05/13] baseband/acc200: add queue configuration Nic Chautru
2022-09-16  1:34 ` [PATCH v3 06/13] baseband/acc200: add LDPC processing functions Nic Chautru
2022-09-16  1:35 ` Nic Chautru [this message]
2022-09-16  1:35 ` [PATCH v3 08/13] baseband/acc200: add support for FFT operations Nic Chautru
2022-09-16  1:35 ` [PATCH v3 09/13] baseband/acc200: support interrupt Nic Chautru
2022-09-16  1:35 ` [PATCH v3 10/13] baseband/acc200: add device status and vf2pf comms Nic Chautru
2022-09-16  1:35 ` [PATCH v3 11/13] baseband/acc200: add PF configure companion function Nic Chautru
2022-09-16  1:35 ` [PATCH v3 12/13] baseband/acc: rename and merge directories into acc Nic Chautru
2022-09-16  1:35 ` [PATCH v3 13/13] baseband/acc: simplify meson dependency Nic Chautru

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1663292106-45320-8-git-send-email-nicolas.chautru@intel.com \
    --to=nicolas.chautru@intel.com \
    --cc=bruce.richardson@intel.com \
    --cc=david.marchand@redhat.com \
    --cc=dev@dpdk.org \
    --cc=hemant.agrawal@nxp.com \
    --cc=hernan.vargas@intel.com \
    --cc=maxime.coquelin@redhat.com \
    --cc=mdr@ashroe.eu \
    --cc=stephen@networkplumber.org \
    --cc=thomas@monjalon.net \
    --cc=trix@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.