All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wen Gu <guwen@linux.alibaba.com>
To: kgraul@linux.ibm.com, wenjia@linux.ibm.com, davem@davemloft.net,
	edumazet@google.com, kuba@kernel.org, pabeni@redhat.com
Cc: linux-s390@vger.kernel.org, netdev@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH net-next 1/2] net/smc: Introduce a specific sysctl for TEST_LINK time
Date: Tue, 20 Sep 2022 10:53:54 +0800	[thread overview]
Message-ID: <1663642434-30035-1-git-send-email-guwen@linux.alibaba.com> (raw)
In-Reply-To: <1663641907-15852-1-git-send-email-guwen@linux.alibaba.com>

SMC-R tests the viability of link by sending out TEST_LINK LLC
messages over RoCE fabric when connections on link have been
idle for a time longer than keepalive interval (testlink time).

But using tcp_keepalive_time as testlink time maybe not quite
suitable because it is default no less than two hours[1], which
is too long for single link to find peer dead. The active host
will still use peer-dead link (QP) sending messages, and can't
find out until get IB_WC_RETRY_EXC_ERR error CQEs, which takes
more time than TEST_LINK timeout (SMC_LLC_WAIT_TIME) normally.

So this patch introduces a independent sysctl for SMC-R to set
link keepalive time, in order to detect link down in time. The
default value is 30 seconds.

[1] https://www.rfc-editor.org/rfc/rfc1122#page-101

Signed-off-by: Wen Gu <guwen@linux.alibaba.com>
---
 Documentation/networking/smc-sysctl.rst |  7 +++++++
 include/net/netns/smc.h                 |  1 +
 net/smc/smc_llc.c                       |  2 +-
 net/smc/smc_llc.h                       |  1 +
 net/smc/smc_sysctl.c                    | 14 ++++++++++++++
 5 files changed, 24 insertions(+), 1 deletion(-)

diff --git a/Documentation/networking/smc-sysctl.rst b/Documentation/networking/smc-sysctl.rst
index 742e90e..f8c3d59 100644
--- a/Documentation/networking/smc-sysctl.rst
+++ b/Documentation/networking/smc-sysctl.rst
@@ -34,3 +34,10 @@ smcr_buf_type - INTEGER
         - 1 - Use virtually contiguous buffers
         - 2 - Mixed use of the two types. Try physically contiguous buffers first.
           If not available, use virtually contiguous buffers then.
+
+smcr_testlink_time - INTEGER
+	How frequently SMC-R link sends out TEST_LINK LLC messages to confirm
+	viability, after the last activity of connections on it. The maximum
+	value is (INT_MAX / HZ) seconds, the minimum value is 1 second.
+
+	Default: 30 seconds.
diff --git a/include/net/netns/smc.h b/include/net/netns/smc.h
index 2adbe2b..d295e2c 100644
--- a/include/net/netns/smc.h
+++ b/include/net/netns/smc.h
@@ -19,5 +19,6 @@ struct netns_smc {
 #endif
 	unsigned int			sysctl_autocorking_size;
 	unsigned int			sysctl_smcr_buf_type;
+	int				sysctl_smcr_testlink_time;
 };
 #endif
diff --git a/net/smc/smc_llc.c b/net/smc/smc_llc.c
index 175026a..388bd2e 100644
--- a/net/smc/smc_llc.c
+++ b/net/smc/smc_llc.c
@@ -2127,7 +2127,7 @@ void smc_llc_lgr_init(struct smc_link_group *lgr, struct smc_sock *smc)
 	init_waitqueue_head(&lgr->llc_flow_waiter);
 	init_waitqueue_head(&lgr->llc_msg_waiter);
 	mutex_init(&lgr->llc_conf_mutex);
-	lgr->llc_testlink_time = READ_ONCE(net->ipv4.sysctl_tcp_keepalive_time);
+	lgr->llc_testlink_time = READ_ONCE(net->smc.sysctl_smcr_testlink_time) * HZ;
 }
 
 /* called after lgr was removed from lgr_list */
diff --git a/net/smc/smc_llc.h b/net/smc/smc_llc.h
index 4404e52..1de9a29 100644
--- a/net/smc/smc_llc.h
+++ b/net/smc/smc_llc.h
@@ -19,6 +19,7 @@
 
 #define SMC_LLC_WAIT_FIRST_TIME		(5 * HZ)
 #define SMC_LLC_WAIT_TIME		(2 * HZ)
+#define SMC_LLC_TESTLINK_DEFAULT_TIME	30
 
 enum smc_llc_reqresp {
 	SMC_LLC_REQ,
diff --git a/net/smc/smc_sysctl.c b/net/smc/smc_sysctl.c
index 0613868..7f68520 100644
--- a/net/smc/smc_sysctl.c
+++ b/net/smc/smc_sysctl.c
@@ -16,8 +16,12 @@
 
 #include "smc.h"
 #include "smc_core.h"
+#include "smc_llc.h"
 #include "smc_sysctl.h"
 
+static int smcr_testlink_time_min = 1;
+static int smcr_testlink_time_max = (INT_MAX / HZ);
+
 static struct ctl_table smc_table[] = {
 	{
 		.procname       = "autocorking_size",
@@ -35,6 +39,15 @@
 		.extra1		= SYSCTL_ZERO,
 		.extra2		= SYSCTL_TWO,
 	},
+	{
+		.procname	= "smcr_testlink_time",
+		.data		= &init_net.smc.sysctl_smcr_testlink_time,
+		.maxlen		= sizeof(int),
+		.mode		= 0644,
+		.proc_handler	= proc_dointvec_minmax,
+		.extra1		= &smcr_testlink_time_min,
+		.extra2		= &smcr_testlink_time_max,
+	},
 	{  }
 };
 
@@ -60,6 +73,7 @@ int __net_init smc_sysctl_net_init(struct net *net)
 
 	net->smc.sysctl_autocorking_size = SMC_AUTOCORKING_DEFAULT_SIZE;
 	net->smc.sysctl_smcr_buf_type = SMCR_PHYS_CONT_BUFS;
+	net->smc.sysctl_smcr_testlink_time = SMC_LLC_TESTLINK_DEFAULT_TIME;
 
 	return 0;
 
-- 
1.8.3.1


  reply	other threads:[~2022-09-20  2:54 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-20  2:45 [PATCH net-next 0/2] Separate SMC parameter settings from TCP sysctls Wen Gu
2022-09-20  2:53 ` Wen Gu [this message]
2022-09-20  2:57   ` [PATCH net-next 1/2] net/smc: Introduce a specific sysctl for TEST_LINK time Tony Lu
2022-09-20  4:55   ` dust.li
2022-09-20  6:23     ` Wen Gu
2022-09-20  8:21       ` dust.li
2022-09-20  9:03         ` Wen Gu
2022-09-20  2:54 ` [PATCH net-next 2/2] net/smc: Unbind r/w buffer size from clcsock and make them tunable Wen Gu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1663642434-30035-1-git-send-email-guwen@linux.alibaba.com \
    --to=guwen@linux.alibaba.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kgraul@linux.ibm.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-s390@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=wenjia@linux.ibm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.