From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: Linux 5.10.144
Date: Tue, 20 Sep 2022 12:47:40 +0200 [thread overview]
Message-ID: <1663670860214214@kroah.com> (raw)
In-Reply-To: <166367086022162@kroah.com>
diff --git a/Documentation/input/joydev/joystick.rst b/Documentation/input/joydev/joystick.rst
index 9746fd76cc58..f38c330c028e 100644
--- a/Documentation/input/joydev/joystick.rst
+++ b/Documentation/input/joydev/joystick.rst
@@ -517,6 +517,7 @@ All I-Force devices are supported by the iforce module. This includes:
* AVB Mag Turbo Force
* AVB Top Shot Pegasus
* AVB Top Shot Force Feedback Racing Wheel
+* Boeder Force Feedback Wheel
* Logitech WingMan Force
* Logitech WingMan Force Wheel
* Guillemot Race Leader Force Feedback
diff --git a/Makefile b/Makefile
index 60b2018c26db..21aa9b04164d 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 10
-SUBLEVEL = 143
+SUBLEVEL = 144
EXTRAVERSION =
NAME = Dare mighty things
diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts
index 7e2b0f198dfa..1053b7c584d8 100644
--- a/arch/arm/boot/dts/imx28-evk.dts
+++ b/arch/arm/boot/dts/imx28-evk.dts
@@ -129,7 +129,7 @@ ssp2: spi@80014000 {
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25vf016b", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index f3bddc5ada4b..13acdc7916b9 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -33,7 +33,7 @@ ssp2: spi@80014000 {
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "m25p80", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx28-sps1.dts b/arch/arm/boot/dts/imx28-sps1.dts
index 43be7a6a769b..90928db0df70 100644
--- a/arch/arm/boot/dts/imx28-sps1.dts
+++ b/arch/arm/boot/dts/imx28-sps1.dts
@@ -51,7 +51,7 @@ ssp2: spi@80014000 {
pinctrl-0 = <&spi2_pins_a>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "everspin,mr25h256", "mr25h256";
diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts
index 0f1616bfa9a8..b72f8ea1e6f6 100644
--- a/arch/arm/boot/dts/imx6dl-rex-basic.dts
+++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts
@@ -19,7 +19,7 @@ memory@10000000 {
};
&ecspi3 {
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index e4578ed3371e..133991ca8c63 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -139,7 +139,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: n25q032@0 {
+ flash: flash@0 {
compatible = "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
index 2a98cc657595..66be04299cbf 100644
--- a/arch/arm/boot/dts/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/imx6q-bx50v3.dtsi
@@ -160,7 +160,7 @@ &ecspi5 {
pinctrl-0 = <&pinctrl_ecspi5>;
status = "okay";
- m25_eeprom: m25p80@0 {
+ m25_eeprom: flash@0 {
compatible = "atmel,at25";
spi-max-frequency = <10000000>;
size = <0x8000>;
diff --git a/arch/arm/boot/dts/imx6q-cm-fx6.dts b/arch/arm/boot/dts/imx6q-cm-fx6.dts
index bfb530f29d9d..1ad41c944b4b 100644
--- a/arch/arm/boot/dts/imx6q-cm-fx6.dts
+++ b/arch/arm/boot/dts/imx6q-cm-fx6.dts
@@ -260,7 +260,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- m25p80@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
index fa2307d8ce86..4dee1b22d5c1 100644
--- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts
@@ -102,7 +102,7 @@ &ecspi5 {
cs-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "m25p80", "jedec,spi-nor";
spi-max-frequency = <40000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-dms-ba16.dts b/arch/arm/boot/dts/imx6q-dms-ba16.dts
index 48fb47e715f6..137db38f0d27 100644
--- a/arch/arm/boot/dts/imx6q-dms-ba16.dts
+++ b/arch/arm/boot/dts/imx6q-dms-ba16.dts
@@ -47,7 +47,7 @@ &ecspi5 {
pinctrl-0 = <&pinctrl_ecspi5>;
status = "okay";
- m25_eeprom: m25p80@0 {
+ m25_eeprom: flash@0 {
compatible = "atmel,at25256B", "atmel,at25";
spi-max-frequency = <20000000>;
size = <0x8000>;
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index 4cde45d5c90c..e894faba571f 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -137,7 +137,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "sst,w25q256", "jedec,spi-nor";
spi-max-frequency = <30000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
index 05ee28388229..cc1801002394 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -100,7 +100,7 @@ &ecspi1 {
cs-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;
status = "okay";
- m25p80@0 {
+ flash@0 {
compatible = "microchip,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts
index 1767e1a3cd53..271f4b2d9b9f 100644
--- a/arch/arm/boot/dts/imx6q-rex-pro.dts
+++ b/arch/arm/boot/dts/imx6q-rex-pro.dts
@@ -19,7 +19,7 @@ memory@10000000 {
};
&ecspi3 {
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "sst,sst25vf032b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
index e21f6ac864e5..baa197c90060 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi
@@ -96,7 +96,7 @@ &ecspi4 {
pinctrl-0 = <&pinctrl_ecspi4>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
index ead7ba27e105..ff8cb47fb9fd 100644
--- a/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-aristainetos2.dtsi
@@ -131,7 +131,7 @@ &ecspi4 {
pinctrl-0 = <&pinctrl_ecspi4>;
status = "okay";
- flash: m25p80@1 {
+ flash: flash@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q128a11", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
index 648f5fcb72e6..2c1d6f28e695 100644
--- a/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-dfi-fs700-m60.dtsi
@@ -35,7 +35,7 @@ &ecspi3 {
pinctrl-0 = <&pinctrl_ecspi3>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "sst,sst25vf040b", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
index e9a4115124eb..37d94aa45a8b 100644
--- a/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-kontron-samx6i.dtsi
@@ -248,8 +248,8 @@ &ecspi4 {
status = "okay";
/* default boot source: workaround #1 for errata ERR006282 */
- smarc_flash: spi-flash@0 {
- compatible = "winbond,w25q16dw", "jedec,spi-nor";
+ smarc_flash: flash@0 {
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <20000000>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index d526f01a2c52..b7e74d859a96 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -179,7 +179,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "microchip,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index a0917823c244..a88323ac6c69 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -321,7 +321,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "microchip,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
index 92d09a3ebe0e..ee7e2371f94b 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_som2.dtsi
@@ -252,7 +252,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "microchip,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
index 1243677b5f97..5adeb7aed220 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
@@ -237,7 +237,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index afe477f32984..17535bf12516 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -272,7 +272,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
status = "disabled"; /* pin conflict with WEIM NOR */
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index fdc3aa9d544d..0aa1a0a28de0 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -313,7 +313,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "sst,sst25vf016b", "jedec,spi-nor";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index f824c9abd11a..758c62fb9cac 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -194,7 +194,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index 25f6f2fb1555..f16c830f1e91 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -137,7 +137,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,m25p32", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
index 66af78e83b70..a2c79bcf9a11 100644
--- a/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
+++ b/arch/arm/boot/dts/imx6sx-nitrogen6sx.dts
@@ -107,7 +107,7 @@ &ecspi1 {
pinctrl-0 = <&pinctrl_ecspi1>;
status = "okay";
- flash: m25p80@0 {
+ flash: flash@0 {
compatible = "microchip,sst25vf016b";
spi-max-frequency = <20000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb-reva.dts b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
index dce5dcf96c25..7dda42553f4b 100644
--- a/arch/arm/boot/dts/imx6sx-sdb-reva.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb-reva.dts
@@ -123,7 +123,7 @@ &qspi2 {
pinctrl-0 = <&pinctrl_qspi2>;
status = "okay";
- flash0: s25fl128s@0 {
+ flash0: flash@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
@@ -133,7 +133,7 @@ flash0: s25fl128s@0 {
spi-tx-bus-width = <4>;
};
- flash1: s25fl128s@2 {
+ flash1: flash@2 {
reg = <2>;
#address-cells = <1>;
#size-cells = <1>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts
index 5a63ca615722..1b808563a536 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dts
+++ b/arch/arm/boot/dts/imx6sx-sdb.dts
@@ -108,7 +108,7 @@ &qspi2 {
pinctrl-0 = <&pinctrl_qspi2>;
status = "okay";
- flash0: n25q256a@0 {
+ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
@@ -118,7 +118,7 @@ flash0: n25q256a@0 {
reg = <0>;
};
- flash1: n25q256a@2 {
+ flash1: flash@2 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
index 64c2d1e9f7fc..71d3c7e05e08 100644
--- a/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
@@ -239,7 +239,7 @@ &qspi {
pinctrl-0 = <&pinctrl_qspi>;
status = "okay";
- flash0: n25q256a@0 {
+ flash0: flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
index 47d3ce5d255f..acd936540d89 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-som.dtsi
@@ -19,7 +19,7 @@ memory@80000000 {
};
&qspi {
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
index a095a7654ac6..29ed38dce580 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6311-som.dtsi
@@ -18,7 +18,7 @@ memory@80000000 {
};
&qspi {
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
index 2a449a3c1ae2..09a83dbdf651 100644
--- a/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
+++ b/arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
@@ -19,7 +19,7 @@ &ecspi2 {
pinctrl-0 = <&pinctrl_ecspi2>;
status = "okay";
- spi-flash@0 {
+ flash@0 {
compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
spi-max-frequency = <50000000>;
reg = <0>;
diff --git a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
index b7e984284e1a..d000606c0704 100644
--- a/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
+++ b/arch/arm/boot/dts/imx6ull-kontron-n6411-som.dtsi
@@ -18,7 +18,7 @@ memory@80000000 {
};
&qspi {
- spi-flash@0 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand";
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 9a8633a6506c..d096b5a1dbeb 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -322,12 +322,12 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
unsigned long offset;
unsigned long npages;
unsigned long size;
- unsigned long retq;
unsigned long *ptr;
void *trampoline;
void *ip;
/* 48 8b 15 <offset> is movq <offset>(%rip), %rdx */
unsigned const char op_ref[] = { 0x48, 0x8b, 0x15 };
+ unsigned const char retq[] = { RET_INSN_OPCODE, INT3_INSN_OPCODE };
union ftrace_op_code_union op_ptr;
int ret;
@@ -367,13 +367,10 @@ create_trampoline(struct ftrace_ops *ops, unsigned int *tramp_size)
ip = trampoline + size;
/* The trampoline ends with ret(q) */
- retq = (unsigned long)ftrace_stub;
if (cpu_feature_enabled(X86_FEATURE_RETHUNK))
memcpy(ip, text_gen_insn(JMP32_INSN_OPCODE, ip, &__x86_return_thunk), JMP32_INSN_SIZE);
else
- ret = copy_from_kernel_nofault(ip, (void *)retq, RET_SIZE);
- if (WARN_ON(ret < 0))
- goto fail;
+ memcpy(ip, retq, sizeof(retq));
/* No need to test direct calls on created trampolines */
if (ops->flags & FTRACE_OPS_FL_SAVE_REGS) {
diff --git a/arch/x86/kernel/ftrace_64.S b/arch/x86/kernel/ftrace_64.S
index e3a375185a1b..5b2dabedcf66 100644
--- a/arch/x86/kernel/ftrace_64.S
+++ b/arch/x86/kernel/ftrace_64.S
@@ -170,7 +170,6 @@ SYM_INNER_LABEL(ftrace_graph_call, SYM_L_GLOBAL)
/*
* This is weak to keep gas from relaxing the jumps.
- * It is also used to copy the RET for trampolines.
*/
SYM_INNER_LABEL_ALIGN(ftrace_stub, SYM_L_WEAK)
UNWIND_HINT_FUNC
@@ -325,7 +324,7 @@ SYM_FUNC_END(ftrace_graph_caller)
SYM_CODE_START(return_to_handler)
UNWIND_HINT_EMPTY
- subq $24, %rsp
+ subq $16, %rsp
/* Save the return values */
movq %rax, (%rsp)
@@ -337,7 +336,19 @@ SYM_CODE_START(return_to_handler)
movq %rax, %rdi
movq 8(%rsp), %rdx
movq (%rsp), %rax
- addq $24, %rsp
- JMP_NOSPEC rdi
+
+ addq $16, %rsp
+ /*
+ * Jump back to the old return address. This cannot be JMP_NOSPEC rdi
+ * since IBT would demand that contain ENDBR, which simply isn't so for
+ * return addresses. Use a retpoline here to keep the RSB balanced.
+ */
+ ANNOTATE_INTRA_FUNCTION_CALL
+ call .Ldo_rop
+ int3
+.Ldo_rop:
+ mov %rdi, (%rsp)
+ UNWIND_HINT_FUNC
+ RET
SYM_CODE_END(return_to_handler)
#endif
diff --git a/drivers/gpio/gpio-mockup.c b/drivers/gpio/gpio-mockup.c
index 67ed4f238d43..780cba4e30d0 100644
--- a/drivers/gpio/gpio-mockup.c
+++ b/drivers/gpio/gpio-mockup.c
@@ -375,6 +375,13 @@ static void gpio_mockup_debugfs_setup(struct device *dev,
}
}
+static void gpio_mockup_debugfs_cleanup(void *data)
+{
+ struct gpio_mockup_chip *chip = data;
+
+ debugfs_remove_recursive(chip->dbg_dir);
+}
+
static void gpio_mockup_dispose_mappings(void *data)
{
struct gpio_mockup_chip *chip = data;
@@ -457,7 +464,7 @@ static int gpio_mockup_probe(struct platform_device *pdev)
gpio_mockup_debugfs_setup(dev, chip);
- return 0;
+ return devm_add_action_or_reset(dev, gpio_mockup_debugfs_cleanup, chip);
}
static struct platform_driver gpio_mockup_driver = {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index ae84d3b582aa..8a2abcfd5a88 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -1921,7 +1921,7 @@ static int psp_load_smu_fw(struct psp_context *psp)
static bool fw_load_skip_check(struct psp_context *psp,
struct amdgpu_firmware_info *ucode)
{
- if (!ucode->fw)
+ if (!ucode->fw || !ucode->ucode_size)
return true;
if (ucode->ucode_id == AMDGPU_UCODE_ID_SMC &&
diff --git a/drivers/gpu/drm/msm/msm_rd.c b/drivers/gpu/drm/msm/msm_rd.c
index fea30e7aa9e8..084b6ae2a476 100644
--- a/drivers/gpu/drm/msm/msm_rd.c
+++ b/drivers/gpu/drm/msm/msm_rd.c
@@ -191,6 +191,9 @@ static int rd_open(struct inode *inode, struct file *file)
file->private_data = rd;
rd->open = true;
+ /* Reset fifo to clear any previously unread data: */
+ rd->fifo.head = rd->fifo.tail = 0;
+
/* the parsing tools need to know gpu-id to know which
* register database to load.
*/
diff --git a/drivers/hid/intel-ish-hid/ishtp-hid.h b/drivers/hid/intel-ish-hid/ishtp-hid.h
index 5ffd0da3cf1f..65af0ebef79f 100644
--- a/drivers/hid/intel-ish-hid/ishtp-hid.h
+++ b/drivers/hid/intel-ish-hid/ishtp-hid.h
@@ -110,7 +110,7 @@ struct report_list {
* @multi_packet_cnt: Count of fragmented packet count
*
* This structure is used to store completion flags and per client data like
- * like report description, number of HID devices etc.
+ * report description, number of HID devices etc.
*/
struct ishtp_cl_data {
/* completion flags */
diff --git a/drivers/hid/intel-ish-hid/ishtp/client.c b/drivers/hid/intel-ish-hid/ishtp/client.c
index 1cc157126fce..c0d69303e3b0 100644
--- a/drivers/hid/intel-ish-hid/ishtp/client.c
+++ b/drivers/hid/intel-ish-hid/ishtp/client.c
@@ -626,13 +626,14 @@ static void ishtp_cl_read_complete(struct ishtp_cl_rb *rb)
}
/**
- * ipc_tx_callback() - IPC tx callback function
+ * ipc_tx_send() - IPC tx send function
* @prm: Pointer to client device instance
*
- * Send message over IPC either first time or on callback on previous message
- * completion
+ * Send message over IPC. Message will be split into fragments
+ * if message size is bigger than IPC FIFO size, and all
+ * fragments will be sent one by one.
*/
-static void ipc_tx_callback(void *prm)
+static void ipc_tx_send(void *prm)
{
struct ishtp_cl *cl = prm;
struct ishtp_cl_tx_ring *cl_msg;
@@ -677,32 +678,41 @@ static void ipc_tx_callback(void *prm)
list);
rem = cl_msg->send_buf.size - cl->tx_offs;
- ishtp_hdr.host_addr = cl->host_client_id;
- ishtp_hdr.fw_addr = cl->fw_client_id;
- ishtp_hdr.reserved = 0;
- pmsg = cl_msg->send_buf.data + cl->tx_offs;
+ while (rem > 0) {
+ ishtp_hdr.host_addr = cl->host_client_id;
+ ishtp_hdr.fw_addr = cl->fw_client_id;
+ ishtp_hdr.reserved = 0;
+ pmsg = cl_msg->send_buf.data + cl->tx_offs;
+
+ if (rem <= dev->mtu) {
+ /* Last fragment or only one packet */
+ ishtp_hdr.length = rem;
+ ishtp_hdr.msg_complete = 1;
+ /* Submit to IPC queue with no callback */
+ ishtp_write_message(dev, &ishtp_hdr, pmsg);
+ cl->tx_offs = 0;
+ cl->sending = 0;
- if (rem <= dev->mtu) {
- ishtp_hdr.length = rem;
- ishtp_hdr.msg_complete = 1;
- cl->sending = 0;
- list_del_init(&cl_msg->list); /* Must be before write */
- spin_unlock_irqrestore(&cl->tx_list_spinlock, tx_flags);
- /* Submit to IPC queue with no callback */
- ishtp_write_message(dev, &ishtp_hdr, pmsg);
- spin_lock_irqsave(&cl->tx_free_list_spinlock, tx_free_flags);
- list_add_tail(&cl_msg->list, &cl->tx_free_list.list);
- ++cl->tx_ring_free_size;
- spin_unlock_irqrestore(&cl->tx_free_list_spinlock,
- tx_free_flags);
- } else {
- /* Send IPC fragment */
- spin_unlock_irqrestore(&cl->tx_list_spinlock, tx_flags);
- cl->tx_offs += dev->mtu;
- ishtp_hdr.length = dev->mtu;
- ishtp_hdr.msg_complete = 0;
- ishtp_send_msg(dev, &ishtp_hdr, pmsg, ipc_tx_callback, cl);
+ break;
+ } else {
+ /* Send ipc fragment */
+ ishtp_hdr.length = dev->mtu;
+ ishtp_hdr.msg_complete = 0;
+ /* All fregments submitted to IPC queue with no callback */
+ ishtp_write_message(dev, &ishtp_hdr, pmsg);
+ cl->tx_offs += dev->mtu;
+ rem = cl_msg->send_buf.size - cl->tx_offs;
+ }
}
+
+ list_del_init(&cl_msg->list);
+ spin_unlock_irqrestore(&cl->tx_list_spinlock, tx_flags);
+
+ spin_lock_irqsave(&cl->tx_free_list_spinlock, tx_free_flags);
+ list_add_tail(&cl_msg->list, &cl->tx_free_list.list);
+ ++cl->tx_ring_free_size;
+ spin_unlock_irqrestore(&cl->tx_free_list_spinlock,
+ tx_free_flags);
}
/**
@@ -720,7 +730,7 @@ static void ishtp_cl_send_msg_ipc(struct ishtp_device *dev,
return;
cl->tx_offs = 0;
- ipc_tx_callback(cl);
+ ipc_tx_send(cl);
++cl->send_msg_cnt_ipc;
}
diff --git a/drivers/input/joystick/iforce/iforce-main.c b/drivers/input/joystick/iforce/iforce-main.c
index b2a68bc9f0b4..b86de1312512 100644
--- a/drivers/input/joystick/iforce/iforce-main.c
+++ b/drivers/input/joystick/iforce/iforce-main.c
@@ -50,6 +50,7 @@ static struct iforce_device iforce_device[] = {
{ 0x046d, 0xc291, "Logitech WingMan Formula Force", btn_wheel, abs_wheel, ff_iforce },
{ 0x05ef, 0x020a, "AVB Top Shot Pegasus", btn_joystick_avb, abs_avb_pegasus, ff_iforce },
{ 0x05ef, 0x8884, "AVB Mag Turbo Force", btn_wheel, abs_wheel, ff_iforce },
+ { 0x05ef, 0x8886, "Boeder Force Feedback Wheel", btn_wheel, abs_wheel, ff_iforce },
{ 0x05ef, 0x8888, "AVB Top Shot Force Feedback Racing Wheel", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x061c, 0xc0a4, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce }, //?
{ 0x061c, 0xc084, "ACT LABS Force RS", btn_wheel, abs_wheel, ff_iforce },
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index 5fc789f717c8..b23abde5d7db 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -154,6 +154,7 @@ static const struct goodix_chip_data gt9x_chip_data = {
static const struct goodix_chip_id goodix_chip_ids[] = {
{ .id = "1151", .data = >1x_chip_data },
+ { .id = "1158", .data = >1x_chip_data },
{ .id = "5663", .data = >1x_chip_data },
{ .id = "5688", .data = >1x_chip_data },
{ .id = "917S", .data = >1x_chip_data },
@@ -1385,6 +1386,7 @@ MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
#ifdef CONFIG_OF
static const struct of_device_id goodix_of_match[] = {
{ .compatible = "goodix,gt1151" },
+ { .compatible = "goodix,gt1158" },
{ .compatible = "goodix,gt5663" },
{ .compatible = "goodix,gt5688" },
{ .compatible = "goodix,gt911" },
diff --git a/drivers/iommu/intel/iommu.c b/drivers/iommu/intel/iommu.c
index 477dde39823c..93c60712a948 100644
--- a/drivers/iommu/intel/iommu.c
+++ b/drivers/iommu/intel/iommu.c
@@ -560,14 +560,36 @@ static inline int domain_pfn_supported(struct dmar_domain *domain,
return !(addr_width < BITS_PER_LONG && pfn >> addr_width);
}
+/*
+ * Calculate the Supported Adjusted Guest Address Widths of an IOMMU.
+ * Refer to 11.4.2 of the VT-d spec for the encoding of each bit of
+ * the returned SAGAW.
+ */
+static unsigned long __iommu_calculate_sagaw(struct intel_iommu *iommu)
+{
+ unsigned long fl_sagaw, sl_sagaw;
+
+ fl_sagaw = BIT(2) | (cap_fl1gp_support(iommu->cap) ? BIT(3) : 0);
+ sl_sagaw = cap_sagaw(iommu->cap);
+
+ /* Second level only. */
+ if (!sm_supported(iommu) || !ecap_flts(iommu->ecap))
+ return sl_sagaw;
+
+ /* First level only. */
+ if (!ecap_slts(iommu->ecap))
+ return fl_sagaw;
+
+ return fl_sagaw & sl_sagaw;
+}
+
static int __iommu_calculate_agaw(struct intel_iommu *iommu, int max_gaw)
{
unsigned long sagaw;
int agaw = -1;
- sagaw = cap_sagaw(iommu->cap);
- for (agaw = width_to_agaw(max_gaw);
- agaw >= 0; agaw--) {
+ sagaw = __iommu_calculate_sagaw(iommu);
+ for (agaw = width_to_agaw(max_gaw); agaw >= 0; agaw--) {
if (test_bit(agaw, &sagaw))
break;
}
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 5143cdd0eeca..be96116dc2cc 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -18146,16 +18146,20 @@ static void tg3_shutdown(struct pci_dev *pdev)
struct net_device *dev = pci_get_drvdata(pdev);
struct tg3 *tp = netdev_priv(dev);
+ tg3_reset_task_cancel(tp);
+
rtnl_lock();
+
netif_device_detach(dev);
if (netif_running(dev))
dev_close(dev);
- if (system_state == SYSTEM_POWER_OFF)
- tg3_power_down(tp);
+ tg3_power_down(tp);
rtnl_unlock();
+
+ pci_disable_device(pdev);
}
/**
diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
index 89c046b204e0..4517517215f2 100644
--- a/drivers/net/ieee802154/cc2520.c
+++ b/drivers/net/ieee802154/cc2520.c
@@ -504,6 +504,7 @@ cc2520_tx(struct ieee802154_hw *hw, struct sk_buff *skb)
goto err_tx;
if (status & CC2520_STATUS_TX_UNDERFLOW) {
+ rc = -EINVAL;
dev_err(&priv->spi->dev, "cc2520 tx underflow exception\n");
goto err_tx;
}
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c
index d030d5e69dc5..e3e35b9bd684 100644
--- a/drivers/nvme/target/tcp.c
+++ b/drivers/nvme/target/tcp.c
@@ -1471,6 +1471,9 @@ static void nvmet_tcp_state_change(struct sock *sk)
goto done;
switch (sk->sk_state) {
+ case TCP_FIN_WAIT2:
+ case TCP_LAST_ACK:
+ break;
case TCP_FIN_WAIT1:
case TCP_CLOSE_WAIT:
case TCP_CLOSE:
diff --git a/drivers/perf/arm_pmu_platform.c b/drivers/perf/arm_pmu_platform.c
index ef9676418c9f..2e1f3680d846 100644
--- a/drivers/perf/arm_pmu_platform.c
+++ b/drivers/perf/arm_pmu_platform.c
@@ -117,7 +117,7 @@ static int pmu_parse_irqs(struct arm_pmu *pmu)
if (num_irqs == 1) {
int irq = platform_get_irq(pdev, 0);
- if (irq && irq_is_percpu_devid(irq))
+ if ((irq > 0) && irq_is_percpu_devid(irq))
return pmu_parse_percpu_irq(pmu, irq);
}
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index 80983f9dfcd5..8e696262215f 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -93,6 +93,7 @@ static const struct key_entry acer_wmi_keymap[] __initconst = {
{KE_KEY, 0x22, {KEY_PROG2} }, /* Arcade */
{KE_KEY, 0x23, {KEY_PROG3} }, /* P_Key */
{KE_KEY, 0x24, {KEY_PROG4} }, /* Social networking_Key */
+ {KE_KEY, 0x27, {KEY_HELP} },
{KE_KEY, 0x29, {KEY_PROG3} }, /* P_Key for TM8372 */
{KE_IGNORE, 0x41, {KEY_MUTE} },
{KE_IGNORE, 0x42, {KEY_PREVIOUSSONG} },
@@ -106,7 +107,13 @@ static const struct key_entry acer_wmi_keymap[] __initconst = {
{KE_IGNORE, 0x48, {KEY_VOLUMEUP} },
{KE_IGNORE, 0x49, {KEY_VOLUMEDOWN} },
{KE_IGNORE, 0x4a, {KEY_VOLUMEDOWN} },
- {KE_IGNORE, 0x61, {KEY_SWITCHVIDEOMODE} },
+ /*
+ * 0x61 is KEY_SWITCHVIDEOMODE. Usually this is a duplicate input event
+ * with the "Video Bus" input device events. But sometimes it is not
+ * a dup. Map it to KEY_UNKNOWN instead of using KE_IGNORE so that
+ * udev/hwdb can override it on systems where it is not a dup.
+ */
+ {KE_KEY, 0x61, {KEY_UNKNOWN} },
{KE_IGNORE, 0x62, {KEY_BRIGHTNESSUP} },
{KE_IGNORE, 0x63, {KEY_BRIGHTNESSDOWN} },
{KE_KEY, 0x64, {KEY_SWITCHVIDEOMODE} }, /* Display Switch */
diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig
index 4df32bc4c7a6..c5d46152d468 100644
--- a/drivers/soc/fsl/Kconfig
+++ b/drivers/soc/fsl/Kconfig
@@ -24,6 +24,7 @@ config FSL_MC_DPIO
tristate "QorIQ DPAA2 DPIO driver"
depends on FSL_MC_BUS
select SOC_BUS
+ select FSL_GUTS
help
Driver for the DPAA2 DPIO object. A DPIO provides queue and
buffer management facilities for software to interact with
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 4051c8cd0cd8..23ab3b048d9b 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -62,6 +62,13 @@ UNUSUAL_DEV(0x0984, 0x0301, 0x0128, 0x0128,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_UAS),
+/* Reported-by: Tom Hu <huxiaoying@kylinos.cn> */
+UNUSUAL_DEV(0x0b05, 0x1932, 0x0000, 0x9999,
+ "ASUS",
+ "External HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),
+
/* Reported-by: David Webb <djw@noc.ac.uk> */
UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999,
"Seagate",
diff --git a/fs/tracefs/inode.c b/fs/tracefs/inode.c
index 8b7315c22f0d..4b7057136852 100644
--- a/fs/tracefs/inode.c
+++ b/fs/tracefs/inode.c
@@ -139,6 +139,8 @@ struct tracefs_mount_opts {
kuid_t uid;
kgid_t gid;
umode_t mode;
+ /* Opt_* bitfield. */
+ unsigned int opts;
};
enum {
@@ -239,6 +241,7 @@ static int tracefs_parse_options(char *data, struct tracefs_mount_opts *opts)
kgid_t gid;
char *p;
+ opts->opts = 0;
opts->mode = TRACEFS_DEFAULT_MODE;
while ((p = strsep(&data, ",")) != NULL) {
@@ -273,24 +276,36 @@ static int tracefs_parse_options(char *data, struct tracefs_mount_opts *opts)
* but traditionally tracefs has ignored all mount options
*/
}
+
+ opts->opts |= BIT(token);
}
return 0;
}
-static int tracefs_apply_options(struct super_block *sb)
+static int tracefs_apply_options(struct super_block *sb, bool remount)
{
struct tracefs_fs_info *fsi = sb->s_fs_info;
struct inode *inode = sb->s_root->d_inode;
struct tracefs_mount_opts *opts = &fsi->mount_opts;
- inode->i_mode &= ~S_IALLUGO;
- inode->i_mode |= opts->mode;
+ /*
+ * On remount, only reset mode/uid/gid if they were provided as mount
+ * options.
+ */
+
+ if (!remount || opts->opts & BIT(Opt_mode)) {
+ inode->i_mode &= ~S_IALLUGO;
+ inode->i_mode |= opts->mode;
+ }
- inode->i_uid = opts->uid;
+ if (!remount || opts->opts & BIT(Opt_uid))
+ inode->i_uid = opts->uid;
- /* Set all the group ids to the mount option */
- set_gid(sb->s_root, opts->gid);
+ if (!remount || opts->opts & BIT(Opt_gid)) {
+ /* Set all the group ids to the mount option */
+ set_gid(sb->s_root, opts->gid);
+ }
return 0;
}
@@ -305,7 +320,7 @@ static int tracefs_remount(struct super_block *sb, int *flags, char *data)
if (err)
goto fail;
- tracefs_apply_options(sb);
+ tracefs_apply_options(sb, true);
fail:
return err;
@@ -357,7 +372,7 @@ static int trace_fill_super(struct super_block *sb, void *data, int silent)
sb->s_op = &tracefs_super_operations;
- tracefs_apply_options(sb);
+ tracefs_apply_options(sb, false);
return 0;
diff --git a/mm/mmap.c b/mm/mmap.c
index b69c9711bb26..31fc116a8ec9 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -2664,6 +2664,7 @@ static void unmap_region(struct mm_struct *mm,
{
struct vm_area_struct *next = vma_next(mm, prev);
struct mmu_gather tlb;
+ struct vm_area_struct *cur_vma;
lru_add_drain();
tlb_gather_mmu(&tlb, mm, start, end);
@@ -2678,8 +2679,12 @@ static void unmap_region(struct mm_struct *mm,
* concurrent flush in this region has to be coming through the rmap,
* and we synchronize against that using the rmap lock.
*/
- if ((vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)) != 0)
- tlb_flush_mmu(&tlb);
+ for (cur_vma = vma; cur_vma; cur_vma = cur_vma->vm_next) {
+ if ((cur_vma->vm_flags & (VM_PFNMAP|VM_MIXEDMAP)) != 0) {
+ tlb_flush_mmu(&tlb);
+ break;
+ }
+ }
free_pgtables(&tlb, vma, prev ? prev->vm_end : FIRST_USER_ADDRESS,
next ? next->vm_start : USER_PGTABLES_CEILING);
prev parent reply other threads:[~2022-09-20 10:47 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-20 10:47 Linux 5.10.144 Greg Kroah-Hartman
2022-09-20 10:47 ` Greg Kroah-Hartman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1663670860214214@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.