All of lore.kernel.org
 help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
	torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: Linux 5.10.160
Date: Mon, 19 Dec 2022 12:42:22 +0100	[thread overview]
Message-ID: <167145014294227@kroah.com> (raw)
In-Reply-To: <1671450141212208@kroah.com>

diff --git a/Makefile b/Makefile
index bb9fab281555..6f7dae2f1a4e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 10
-SUBLEVEL = 159
+SUBLEVEL = 160
 EXTRAVERSION =
 NAME = Dare mighty things
 
diff --git a/arch/x86/kernel/cpu/mtrr/mtrr.c b/arch/x86/kernel/cpu/mtrr/mtrr.c
index 6a80f36b5d59..5f436cb4f7c4 100644
--- a/arch/x86/kernel/cpu/mtrr/mtrr.c
+++ b/arch/x86/kernel/cpu/mtrr/mtrr.c
@@ -794,8 +794,6 @@ void mtrr_ap_init(void)
 	if (!use_intel() || mtrr_aps_delayed_init)
 		return;
 
-	rcu_cpu_starting(smp_processor_id());
-
 	/*
 	 * Ideally we should hold mtrr_mutex here to avoid mtrr entries
 	 * changed, but this routine will be called in cpu boot time,
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 8baff500914e..e8e5515fb7e9 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -229,6 +229,7 @@ static void notrace start_secondary(void *unused)
 #endif
 	cpu_init_exception_handling();
 	cpu_init();
+	rcu_cpu_starting(raw_smp_processor_id());
 	x86_cpuinit.early_percpu_clock_init();
 	smp_callin();
 
diff --git a/drivers/net/can/usb/mcba_usb.c b/drivers/net/can/usb/mcba_usb.c
index 21063335ab59..c07e327929ba 100644
--- a/drivers/net/can/usb/mcba_usb.c
+++ b/drivers/net/can/usb/mcba_usb.c
@@ -47,6 +47,10 @@
 #define MCBA_VER_REQ_USB 1
 #define MCBA_VER_REQ_CAN 2
 
+/* Drive the CAN_RES signal LOW "0" to activate R24 and R25 */
+#define MCBA_VER_TERMINATION_ON 0
+#define MCBA_VER_TERMINATION_OFF 1
+
 #define MCBA_SIDL_EXID_MASK 0x8
 #define MCBA_DLC_MASK 0xf
 #define MCBA_DLC_RTR_MASK 0x40
@@ -469,7 +473,7 @@ static void mcba_usb_process_ka_usb(struct mcba_priv *priv,
 		priv->usb_ka_first_pass = false;
 	}
 
-	if (msg->termination_state)
+	if (msg->termination_state == MCBA_VER_TERMINATION_ON)
 		priv->can.termination = MCBA_TERMINATION_ENABLED;
 	else
 		priv->can.termination = MCBA_TERMINATION_DISABLED;
@@ -789,9 +793,9 @@ static int mcba_set_termination(struct net_device *netdev, u16 term)
 	};
 
 	if (term == MCBA_TERMINATION_ENABLED)
-		usb_msg.termination = 1;
+		usb_msg.termination = MCBA_VER_TERMINATION_ON;
 	else
-		usb_msg.termination = 0;
+		usb_msg.termination = MCBA_VER_TERMINATION_OFF;
 
 	mcba_usb_xmit_cmd(priv, (struct mcba_usb_msg *)&usb_msg);
 
diff --git a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c
index 6ef48eb3a77d..b163489489e9 100644
--- a/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c
+++ b/drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c
@@ -874,7 +874,6 @@ area_cache_get(struct nfp_cpp *cpp, u32 id,
 	}
 
 	/* Adjust the start address to be cache size aligned */
-	cache->id = id;
 	cache->addr = addr & ~(u64)(cache->size - 1);
 
 	/* Re-init to the new ID and address */
@@ -894,6 +893,8 @@ area_cache_get(struct nfp_cpp *cpp, u32 id,
 		return NULL;
 	}
 
+	cache->id = id;
+
 exit:
 	/* Adjust offset */
 	*offset = addr - cache->addr;
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index 089f39103584..c222d7bf6ce1 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -817,6 +817,8 @@ static blk_status_t nvme_setup_prp_simple(struct nvme_dev *dev,
 	cmnd->dptr.prp1 = cpu_to_le64(iod->first_dma);
 	if (bv->bv_len > first_prp_len)
 		cmnd->dptr.prp2 = cpu_to_le64(iod->first_dma + first_prp_len);
+	else
+		cmnd->dptr.prp2 = 0;
 	return BLK_STS_OK;
 }
 
diff --git a/drivers/pinctrl/mediatek/mtk-eint.c b/drivers/pinctrl/mediatek/mtk-eint.c
index 22736f60c16c..64a32d3ca481 100644
--- a/drivers/pinctrl/mediatek/mtk-eint.c
+++ b/drivers/pinctrl/mediatek/mtk-eint.c
@@ -278,12 +278,15 @@ static struct irq_chip mtk_eint_irq_chip = {
 
 static unsigned int mtk_eint_hw_init(struct mtk_eint *eint)
 {
-	void __iomem *reg = eint->base + eint->regs->dom_en;
+	void __iomem *dom_en = eint->base + eint->regs->dom_en;
+	void __iomem *mask_set = eint->base + eint->regs->mask_set;
 	unsigned int i;
 
 	for (i = 0; i < eint->hw->ap_num; i += 32) {
-		writel(0xffffffff, reg);
-		reg += 4;
+		writel(0xffffffff, dom_en);
+		writel(0xffffffff, mask_set);
+		dom_en += 4;
+		mask_set += 4;
 	}
 
 	return 0;
diff --git a/fs/fuse/dir.c b/fs/fuse/dir.c
index 8e95a75a4559..80a9e50392a0 100644
--- a/fs/fuse/dir.c
+++ b/fs/fuse/dir.c
@@ -205,7 +205,7 @@ static int fuse_dentry_revalidate(struct dentry *entry, unsigned int flags)
 	if (inode && fuse_is_bad(inode))
 		goto invalid;
 	else if (time_before64(fuse_dentry_time(entry), get_jiffies_64()) ||
-		 (flags & LOOKUP_REVAL)) {
+		 (flags & (LOOKUP_EXCL | LOOKUP_REVAL))) {
 		struct fuse_entry_out outarg;
 		FUSE_ARGS(args);
 		struct fuse_forget_link *forget;
diff --git a/fs/io_uring.c b/fs/io_uring.c
index c5c22b067cd8..84758e512a04 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -936,7 +936,7 @@ static const struct io_op_def io_op_defs[] = {
 		.needs_file		= 1,
 		.hash_reg_file		= 1,
 		.unbound_nonreg_file	= 1,
-		.work_flags		= IO_WQ_WORK_BLKCG,
+		.work_flags		= IO_WQ_WORK_BLKCG | IO_WQ_WORK_FILES,
 	},
 	[IORING_OP_PROVIDE_BUFFERS] = {},
 	[IORING_OP_REMOVE_BUFFERS] = {},
diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c
index a4ae1fcd2ab1..b09ead06a249 100644
--- a/fs/nfsd/vfs.c
+++ b/fs/nfsd/vfs.c
@@ -570,6 +570,7 @@ __be32 nfsd4_clone_file_range(struct nfsd_file *nf_src, u64 src_pos,
 ssize_t nfsd_copy_file_range(struct file *src, u64 src_pos, struct file *dst,
 			     u64 dst_pos, u64 count)
 {
+	ssize_t ret;
 
 	/*
 	 * Limit copy to 4MB to prevent indefinitely blocking an nfsd
@@ -580,7 +581,12 @@ ssize_t nfsd_copy_file_range(struct file *src, u64 src_pos, struct file *dst,
 	 * limit like this and pipeline multiple COPY requests.
 	 */
 	count = min_t(u64, count, 1 << 22);
-	return vfs_copy_file_range(src, src_pos, dst, dst_pos, count, 0);
+	ret = vfs_copy_file_range(src, src_pos, dst, dst_pos, count, 0);
+
+	if (ret == -EOPNOTSUPP || ret == -EXDEV)
+		ret = vfs_copy_file_range(src, src_pos, dst, dst_pos, count,
+					  COPY_FILE_SPLICE);
+	return ret;
 }
 
 __be32 nfsd4_vfs_fallocate(struct svc_rqst *rqstp, struct svc_fh *fhp,
diff --git a/fs/read_write.c b/fs/read_write.c
index 75f764b43418..0066acb6b380 100644
--- a/fs/read_write.c
+++ b/fs/read_write.c
@@ -1388,28 +1388,6 @@ ssize_t generic_copy_file_range(struct file *file_in, loff_t pos_in,
 }
 EXPORT_SYMBOL(generic_copy_file_range);
 
-static ssize_t do_copy_file_range(struct file *file_in, loff_t pos_in,
-				  struct file *file_out, loff_t pos_out,
-				  size_t len, unsigned int flags)
-{
-	/*
-	 * Although we now allow filesystems to handle cross sb copy, passing
-	 * a file of the wrong filesystem type to filesystem driver can result
-	 * in an attempt to dereference the wrong type of ->private_data, so
-	 * avoid doing that until we really have a good reason.  NFS defines
-	 * several different file_system_type structures, but they all end up
-	 * using the same ->copy_file_range() function pointer.
-	 */
-	if (file_out->f_op->copy_file_range &&
-	    file_out->f_op->copy_file_range == file_in->f_op->copy_file_range)
-		return file_out->f_op->copy_file_range(file_in, pos_in,
-						       file_out, pos_out,
-						       len, flags);
-
-	return generic_copy_file_range(file_in, pos_in, file_out, pos_out, len,
-				       flags);
-}
-
 /*
  * Performs necessary checks before doing a file copy
  *
@@ -1431,6 +1409,26 @@ static int generic_copy_file_checks(struct file *file_in, loff_t pos_in,
 	if (ret)
 		return ret;
 
+	/*
+	 * We allow some filesystems to handle cross sb copy, but passing
+	 * a file of the wrong filesystem type to filesystem driver can result
+	 * in an attempt to dereference the wrong type of ->private_data, so
+	 * avoid doing that until we really have a good reason.
+	 *
+	 * nfs and cifs define several different file_system_type structures
+	 * and several different sets of file_operations, but they all end up
+	 * using the same ->copy_file_range() function pointer.
+	 */
+	if (flags & COPY_FILE_SPLICE) {
+		/* cross sb splice is allowed */
+	} else if (file_out->f_op->copy_file_range) {
+		if (file_in->f_op->copy_file_range !=
+		    file_out->f_op->copy_file_range)
+			return -EXDEV;
+	} else if (file_inode(file_in)->i_sb != file_inode(file_out)->i_sb) {
+		return -EXDEV;
+	}
+
 	/* Don't touch certain kinds of inodes */
 	if (IS_IMMUTABLE(inode_out))
 		return -EPERM;
@@ -1473,8 +1471,9 @@ ssize_t vfs_copy_file_range(struct file *file_in, loff_t pos_in,
 			    size_t len, unsigned int flags)
 {
 	ssize_t ret;
+	bool splice = flags & COPY_FILE_SPLICE;
 
-	if (flags != 0)
+	if (flags & ~COPY_FILE_SPLICE)
 		return -EINVAL;
 
 	ret = generic_copy_file_checks(file_in, pos_in, file_out, pos_out, &len,
@@ -1496,26 +1495,43 @@ ssize_t vfs_copy_file_range(struct file *file_in, loff_t pos_in,
 	file_start_write(file_out);
 
 	/*
-	 * Try cloning first, this is supported by more file systems, and
-	 * more efficient if both clone and copy are supported (e.g. NFS).
+	 * Cloning is supported by more file systems, so we implement copy on
+	 * same sb using clone, but for filesystems where both clone and copy
+	 * are supported (e.g. nfs,cifs), we only call the copy method.
 	 */
-	if (file_in->f_op->remap_file_range &&
-	    file_inode(file_in)->i_sb == file_inode(file_out)->i_sb) {
-		loff_t cloned;
+	if (!splice && file_out->f_op->copy_file_range) {
+		ret = file_out->f_op->copy_file_range(file_in, pos_in,
+						      file_out, pos_out,
+						      len, flags);
+		goto done;
+	}
 
-		cloned = file_in->f_op->remap_file_range(file_in, pos_in,
+	if (!splice && file_in->f_op->remap_file_range &&
+	    file_inode(file_in)->i_sb == file_inode(file_out)->i_sb) {
+		ret = file_in->f_op->remap_file_range(file_in, pos_in,
 				file_out, pos_out,
 				min_t(loff_t, MAX_RW_COUNT, len),
 				REMAP_FILE_CAN_SHORTEN);
-		if (cloned > 0) {
-			ret = cloned;
+		if (ret > 0)
 			goto done;
-		}
 	}
 
-	ret = do_copy_file_range(file_in, pos_in, file_out, pos_out, len,
-				flags);
-	WARN_ON_ONCE(ret == -EOPNOTSUPP);
+	/*
+	 * We can get here for same sb copy of filesystems that do not implement
+	 * ->copy_file_range() in case filesystem does not support clone or in
+	 * case filesystem supports clone but rejected the clone request (e.g.
+	 * because it was not block aligned).
+	 *
+	 * In both cases, fall back to kernel copy so we are able to maintain a
+	 * consistent story about which filesystems support copy_file_range()
+	 * and which filesystems do not, that will allow userspace tools to
+	 * make consistent desicions w.r.t using copy_file_range().
+	 *
+	 * We also get here if caller (e.g. nfsd) requested COPY_FILE_SPLICE.
+	 */
+	ret = generic_copy_file_range(file_in, pos_in, file_out, pos_out, len,
+				      flags);
+
 done:
 	if (ret > 0) {
 		fsnotify_access(file_in);
@@ -1566,6 +1582,10 @@ SYSCALL_DEFINE6(copy_file_range, int, fd_in, loff_t __user *, off_in,
 		pos_out = f_out.file->f_pos;
 	}
 
+	ret = -EINVAL;
+	if (flags != 0)
+		goto out;
+
 	ret = vfs_copy_file_range(f_in.file, pos_in, f_out.file, pos_out, len,
 				  flags);
 	if (ret > 0) {
diff --git a/include/linux/can/platform/sja1000.h b/include/linux/can/platform/sja1000.h
index 5755ae5a4712..6a869682c120 100644
--- a/include/linux/can/platform/sja1000.h
+++ b/include/linux/can/platform/sja1000.h
@@ -14,7 +14,7 @@
 #define OCR_MODE_TEST     0x01
 #define OCR_MODE_NORMAL   0x02
 #define OCR_MODE_CLOCK    0x03
-#define OCR_MODE_MASK     0x07
+#define OCR_MODE_MASK     0x03
 #define OCR_TX0_INVERT    0x04
 #define OCR_TX0_PULLDOWN  0x08
 #define OCR_TX0_PULLUP    0x10
diff --git a/include/linux/fs.h b/include/linux/fs.h
index df54acdd3554..ebfc0b2b4969 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1817,6 +1817,14 @@ struct dir_context {
  */
 #define REMAP_FILE_ADVISORY		(REMAP_FILE_CAN_SHORTEN)
 
+/*
+ * These flags control the behavior of vfs_copy_file_range().
+ * They are not available to the user via syscall.
+ *
+ * COPY_FILE_SPLICE: call splice direct instead of fs clone/copy ops
+ */
+#define COPY_FILE_SPLICE		(1 << 0)
+
 struct iov_iter;
 
 struct file_operations {
diff --git a/sound/soc/codecs/cs42l51.c b/sound/soc/codecs/cs42l51.c
index fc6a2bc311b4..c61b17dc2af8 100644
--- a/sound/soc/codecs/cs42l51.c
+++ b/sound/soc/codecs/cs42l51.c
@@ -146,7 +146,7 @@ static const struct snd_kcontrol_new cs42l51_snd_controls[] = {
 			0, 0xA0, 96, adc_att_tlv),
 	SOC_DOUBLE_R_SX_TLV("PGA Volume",
 			CS42L51_ALC_PGA_CTL, CS42L51_ALC_PGB_CTL,
-			0, 0x19, 30, pga_tlv),
+			0, 0x1A, 30, pga_tlv),
 	SOC_SINGLE("Playback Deemphasis Switch", CS42L51_DAC_CTL, 3, 1, 0),
 	SOC_SINGLE("Auto-Mute Switch", CS42L51_DAC_CTL, 2, 1, 0),
 	SOC_SINGLE("Soft Ramp Switch", CS42L51_DAC_CTL, 1, 1, 0),
diff --git a/sound/soc/fsl/fsl_micfil.c b/sound/soc/fsl/fsl_micfil.c
index efc5daf53bba..6c794605e33c 100644
--- a/sound/soc/fsl/fsl_micfil.c
+++ b/sound/soc/fsl/fsl_micfil.c
@@ -190,6 +190,25 @@ static int fsl_micfil_reset(struct device *dev)
 		return ret;
 	}
 
+	/*
+	 * SRES is self-cleared bit, but REG_MICFIL_CTRL1 is defined
+	 * as non-volatile register, so SRES still remain in regmap
+	 * cache after set, that every update of REG_MICFIL_CTRL1,
+	 * software reset happens. so clear it explicitly.
+	 */
+	ret = regmap_clear_bits(micfil->regmap, REG_MICFIL_CTRL1,
+				MICFIL_CTRL1_SRES);
+	if (ret)
+		return ret;
+
+	/*
+	 * Set SRES should clear CHnF flags, But even add delay here
+	 * the CHnF may not be cleared sometimes, so clear CHnF explicitly.
+	 */
+	ret = regmap_write_bits(micfil->regmap, REG_MICFIL_STAT, 0xFF, 0xFF);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c
index 5fdd96e77ef3..daecd386d5ec 100644
--- a/sound/soc/soc-ops.c
+++ b/sound/soc/soc-ops.c
@@ -445,8 +445,15 @@ int snd_soc_put_volsw_sx(struct snd_kcontrol *kcontrol,
 		return err;
 
 	if (snd_soc_volsw_is_stereo(mc)) {
+		val2 = ucontrol->value.integer.value[1];
+
+		if (mc->platform_max && val2 > mc->platform_max)
+			return -EINVAL;
+		if (val2 > max)
+			return -EINVAL;
+
 		val_mask = mask << rshift;
-		val2 = (ucontrol->value.integer.value[1] + min) & mask;
+		val2 = (val2 + min) & mask;
 		val2 = val2 << rshift;
 
 		err = snd_soc_component_update_bits(component, reg2, val_mask,
diff --git a/tools/lib/bpf/libbpf_probes.c b/tools/lib/bpf/libbpf_probes.c
index d38284a3aaf0..13393f0eab25 100644
--- a/tools/lib/bpf/libbpf_probes.c
+++ b/tools/lib/bpf/libbpf_probes.c
@@ -244,7 +244,7 @@ bool bpf_probe_map_type(enum bpf_map_type map_type, __u32 ifindex)
 	case BPF_MAP_TYPE_RINGBUF:
 		key_size = 0;
 		value_size = 0;
-		max_entries = 4096;
+		max_entries = sysconf(_SC_PAGE_SIZE);
 		break;
 	case BPF_MAP_TYPE_UNSPEC:
 	case BPF_MAP_TYPE_HASH:

      reply	other threads:[~2022-12-19 11:42 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-12-19 11:42 Linux 5.10.160 Greg Kroah-Hartman
2022-12-19 11:42 ` Greg Kroah-Hartman [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=167145014294227@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=akpm@linux-foundation.org \
    --cc=jslaby@suse.cz \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lwn@lwn.net \
    --cc=stable@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.