From: Michael Chan <michael.chan@broadcom.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, kuba@kernel.org, edumazet@google.com,
pabeni@redhat.com, bpf@vger.kernel.org, gospo@broadcom.com
Subject: [PATCH net 4/5] bnxt_en: Fix first buffer size calculations for XDP multi-buffer
Date: Mon, 26 Dec 2022 22:19:39 -0500 [thread overview]
Message-ID: <1672111180-19463-5-git-send-email-michael.chan@broadcom.com> (raw)
In-Reply-To: <1672111180-19463-1-git-send-email-michael.chan@broadcom.com>
[-- Attachment #1: Type: text/plain, Size: 4726 bytes --]
The size of the first buffer is always page size, and the useable
space is the page size minus the offset and the skb_shared_info size.
Make sure SKB and XDP buf sizes match so that the skb_shared_info
is at the same offset seen from the SKB and XDP_BUF.
build_skb() should be passed PAGE_SIZE. xdp_init_buff() should
be passed PAGE_SIZE as well. xdp_get_shared_info_from_buff() will
automatically deduct the skb_shared_info size if the XDP buffer
has frags. There is no need to keep bp->xdp_has_frags.
Change BNXT_PAGE_MODE_BUF_SIZE to BNXT_MAX_PAGE_MODE_MTU_SBUF
since this constant is really the MTU with ethernet header size
subtracted.
Also fix the BNXT_MAX_PAGE_MODE_MTU macro with proper parentheses.
Fixes: 32861236190b ("bnxt: change receive ring space parameters")
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
---
drivers/net/ethernet/broadcom/bnxt/bnxt.c | 9 +++++----
drivers/net/ethernet/broadcom/bnxt/bnxt.h | 15 +++++++++++----
drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c | 7 +------
3 files changed, 17 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 1acabfe26db1..a21c6829e301 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -991,8 +991,7 @@ static struct sk_buff *bnxt_rx_multi_page_skb(struct bnxt *bp,
dma_addr -= bp->rx_dma_offset;
dma_unmap_page_attrs(&bp->pdev->dev, dma_addr, PAGE_SIZE, bp->rx_dir,
DMA_ATTR_WEAK_ORDERING);
- skb = build_skb(page_address(page), BNXT_PAGE_MODE_BUF_SIZE +
- bp->rx_dma_offset);
+ skb = build_skb(page_address(page), PAGE_SIZE);
if (!skb) {
__free_page(page);
return NULL;
@@ -3969,8 +3968,10 @@ void bnxt_set_ring_params(struct bnxt *bp)
bp->rx_agg_ring_mask = (bp->rx_agg_nr_pages * RX_DESC_CNT) - 1;
if (BNXT_RX_PAGE_MODE(bp)) {
- rx_space = BNXT_PAGE_MODE_BUF_SIZE;
- rx_size = BNXT_MAX_PAGE_MODE_MTU;
+ rx_space = PAGE_SIZE;
+ rx_size = PAGE_SIZE -
+ ALIGN(max(NET_SKB_PAD, XDP_PACKET_HEADROOM), 8) -
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
} else {
rx_size = SKB_DATA_ALIGN(BNXT_RX_COPY_THRESH + NET_IP_ALIGN);
rx_space = rx_size + NET_SKB_PAD +
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index 41c6dd0ae447..5163ef4a49ea 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -591,12 +591,20 @@ struct nqe_cn {
#define BNXT_RX_PAGE_SIZE (1 << BNXT_RX_PAGE_SHIFT)
#define BNXT_MAX_MTU 9500
-#define BNXT_PAGE_MODE_BUF_SIZE \
+
+/* First RX buffer page in XDP multi-buf mode
+ *
+ * +-------------------------------------------------------------------------+
+ * | XDP_PACKET_HEADROOM | bp->rx_buf_use_size | skb_shared_info|
+ * | (bp->rx_dma_offset) | | |
+ * +-------------------------------------------------------------------------+
+ */
+#define BNXT_MAX_PAGE_MODE_MTU_SBUF \
((unsigned int)PAGE_SIZE - VLAN_ETH_HLEN - NET_IP_ALIGN - \
XDP_PACKET_HEADROOM)
#define BNXT_MAX_PAGE_MODE_MTU \
- BNXT_PAGE_MODE_BUF_SIZE - \
- SKB_DATA_ALIGN((unsigned int)sizeof(struct skb_shared_info))
+ (BNXT_MAX_PAGE_MODE_MTU_SBUF - \
+ SKB_DATA_ALIGN((unsigned int)sizeof(struct skb_shared_info)))
#define BNXT_MIN_PKT_SIZE 52
@@ -2134,7 +2142,6 @@ struct bnxt {
#define BNXT_DUMP_CRASH 1
struct bpf_prog *xdp_prog;
- u8 xdp_has_frags;
struct bnxt_ptp_cfg *ptp_cfg;
u8 ptp_all_rx_tstamp;
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
index 2ceeaa818c1c..36d5202c0aee 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c
@@ -193,9 +193,6 @@ void bnxt_xdp_buff_init(struct bnxt *bp, struct bnxt_rx_ring_info *rxr,
mapping = rx_buf->mapping - bp->rx_dma_offset;
dma_sync_single_for_cpu(&pdev->dev, mapping + offset, len, bp->rx_dir);
- if (bp->xdp_has_frags)
- buflen = BNXT_PAGE_MODE_BUF_SIZE + offset;
-
xdp_init_buff(xdp, buflen, &rxr->xdp_rxq);
xdp_prepare_buff(xdp, data_ptr - offset, offset, len, false);
}
@@ -404,10 +401,8 @@ static int bnxt_xdp_set(struct bnxt *bp, struct bpf_prog *prog)
netdev_warn(dev, "ethtool rx/tx channels must be combined to support XDP.\n");
return -EOPNOTSUPP;
}
- if (prog) {
+ if (prog)
tx_xdp = bp->rx_nr_rings;
- bp->xdp_has_frags = prog->aux->xdp_has_frags;
- }
tc = netdev_get_num_tc(dev);
if (!tc)
--
2.18.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4209 bytes --]
next prev parent reply other threads:[~2022-12-27 3:20 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-12-27 3:19 [PATCH net 0/5] bnxt_en: Bug fixes Michael Chan
2022-12-27 3:19 ` [PATCH net 1/5] bnxt_en: fix devlink port registration to netdev Michael Chan
2022-12-27 3:19 ` [PATCH net 2/5] bnxt_en: Simplify bnxt_xdp_buff_init() Michael Chan
2022-12-27 3:19 ` [PATCH net 3/5] bnxt_en: Fix XDP RX path Michael Chan
2022-12-27 3:19 ` Michael Chan [this message]
2022-12-27 3:19 ` [PATCH net 5/5] bnxt_en: Fix HDS and jumbo thresholds for RX packets Michael Chan
2022-12-28 10:20 ` [PATCH net 0/5] bnxt_en: Bug fixes patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1672111180-19463-5-git-send-email-michael.chan@broadcom.com \
--to=michael.chan@broadcom.com \
--cc=bpf@vger.kernel.org \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gospo@broadcom.com \
--cc=kuba@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.