From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: Linux 5.4.230
Date: Tue, 24 Jan 2023 07:28:38 +0100 [thread overview]
Message-ID: <16745417182339@kroah.com> (raw)
In-Reply-To: <167454171811113@kroah.com>
diff --git a/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
new file mode 100644
index 000000000000..5407468a8dda
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/amlogic,g12a-usb3-pcie-phy.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/amlogic,g12a-usb3-pcie-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic G12A USB3 + PCIE Combo PHY
+
+maintainers:
+ - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,g12a-usb3-pcie-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: ref_clk
+
+ resets:
+ maxItems: 1
+
+ reset-names:
+ items:
+ - const: phy
+
+ "#phy-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - reset-names
+ - "#phy-cells"
+
+examples:
+ - |
+ phy@46000 {
+ compatible = "amlogic,g12a-usb3-pcie-phy";
+ reg = <0x46000 0x2000>;
+ clocks = <&ref_clk>;
+ clock-names = "ref_clk";
+ resets = <&phy_reset>;
+ reset-names = "phy";
+ #phy-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
deleted file mode 100644
index 346f9c35427c..000000000000
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
+++ /dev/null
@@ -1,57 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-# Copyright 2019 BayLibre, SAS
-%YAML 1.2
----
-$id: "http://devicetree.org/schemas/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml#"
-$schema: "http://devicetree.org/meta-schemas/core.yaml#"
-
-title: Amlogic G12A USB3 + PCIE Combo PHY
-
-maintainers:
- - Neil Armstrong <narmstrong@baylibre.com>
-
-properties:
- compatible:
- enum:
- - amlogic,meson-g12a-usb3-pcie-phy
-
- reg:
- maxItems: 1
-
- clocks:
- maxItems: 1
-
- clock-names:
- items:
- - const: ref_clk
-
- resets:
- maxItems: 1
-
- reset-names:
- items:
- - const: phy
-
- "#phy-cells":
- const: 1
-
-required:
- - compatible
- - reg
- - clocks
- - clock-names
- - resets
- - reset-names
- - "#phy-cells"
-
-examples:
- - |
- phy@46000 {
- compatible = "amlogic,meson-g12a-usb3-pcie-phy";
- reg = <0x46000 0x2000>;
- clocks = <&ref_clk>;
- clock-names = "ref_clk";
- resets = <&phy_reset>;
- reset-names = "phy";
- #phy-cells = <1>;
- };
diff --git a/Makefile b/Makefile
index abe29e47198b..6a947b4ed5dc 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 4
-SUBLEVEL = 229
+SUBLEVEL = 230
EXTRAVERSION =
NAME = Kleptomaniac Octopus
diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
index b271da0fa219..17d092eb1934 100644
--- a/arch/x86/kernel/fpu/init.c
+++ b/arch/x86/kernel/fpu/init.c
@@ -139,9 +139,6 @@ static void __init fpu__init_system_generic(void)
unsigned int fpu_kernel_xstate_size;
EXPORT_SYMBOL_GPL(fpu_kernel_xstate_size);
-/* Get alignment of the TYPE. */
-#define TYPE_ALIGN(TYPE) offsetof(struct { char x; TYPE test; }, test)
-
/*
* Enforce that 'MEMBER' is the last field of 'TYPE'.
*
@@ -149,8 +146,8 @@ EXPORT_SYMBOL_GPL(fpu_kernel_xstate_size);
* because that's how C aligns structs.
*/
#define CHECK_MEMBER_AT_END_OF(TYPE, MEMBER) \
- BUILD_BUG_ON(sizeof(TYPE) != ALIGN(offsetofend(TYPE, MEMBER), \
- TYPE_ALIGN(TYPE)))
+ BUILD_BUG_ON(sizeof(TYPE) != \
+ ALIGN(offsetofend(TYPE, MEMBER), _Alignof(TYPE)))
/*
* We append the 'struct fpu' to the task_struct:
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index a1ce307c502f..0b970b91750c 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -551,6 +551,11 @@ static noinline void axi_chan_handle_err(struct axi_dma_chan *chan, u32 status)
/* The bad descriptor currently is in the head of vc list */
vd = vchan_next_desc(&chan->vc);
+ if (!vd) {
+ dev_err(chan2dev(chan), "BUG: %s, IRQ with no descriptors\n",
+ axi_chan_name(chan));
+ goto out;
+ }
/* Remove the completed descriptor from issued list */
list_del(&vd->node);
@@ -565,6 +570,7 @@ static noinline void axi_chan_handle_err(struct axi_dma_chan *chan, u32 status)
/* Try to restart the controller */
axi_chan_start_first_queued(chan);
+out:
spin_unlock_irqrestore(&chan->vc.lock, flags);
}
diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index 9068591bd684..d82c25138749 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -224,7 +224,7 @@ static int tegra_adma_init(struct tegra_adma *tdma)
int ret;
/* Clear any interrupts */
- tdma_write(tdma, tdma->cdata->global_int_clear, 0x1);
+ tdma_write(tdma, tdma->cdata->ch_base_offset + tdma->cdata->global_int_clear, 0x1);
/* Assert soft reset */
tdma_write(tdma, ADMA_GLOBAL_SOFT_RESET, 0x1);
diff --git a/drivers/firmware/efi/runtime-wrappers.c b/drivers/firmware/efi/runtime-wrappers.c
index 136b9c7f9ac9..a6735f1a16d1 100644
--- a/drivers/firmware/efi/runtime-wrappers.c
+++ b/drivers/firmware/efi/runtime-wrappers.c
@@ -62,6 +62,7 @@ struct efi_runtime_work efi_rts_work;
\
if (!efi_enabled(EFI_RUNTIME_SERVICES)) { \
pr_warn_once("EFI Runtime Services are disabled!\n"); \
+ efi_rts_work.status = EFI_DEVICE_ERROR; \
goto exit; \
} \
\
diff --git a/drivers/firmware/google/gsmi.c b/drivers/firmware/google/gsmi.c
index 517fb57d07d2..94753ad18ca6 100644
--- a/drivers/firmware/google/gsmi.c
+++ b/drivers/firmware/google/gsmi.c
@@ -359,9 +359,10 @@ static efi_status_t gsmi_get_variable(efi_char16_t *name,
memcpy(data, gsmi_dev.data_buf->start, *data_size);
/* All variables are have the following attributes */
- *attr = EFI_VARIABLE_NON_VOLATILE |
- EFI_VARIABLE_BOOTSERVICE_ACCESS |
- EFI_VARIABLE_RUNTIME_ACCESS;
+ if (attr)
+ *attr = EFI_VARIABLE_NON_VOLATILE |
+ EFI_VARIABLE_BOOTSERVICE_ACCESS |
+ EFI_VARIABLE_RUNTIME_ACCESS;
}
spin_unlock_irqrestore(&gsmi_dev.lock, flags);
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index fe9c135fee0e..9fd711005c1f 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -7409,8 +7409,8 @@ static int amdgpu_dm_atomic_check(struct drm_device *dev,
goto fail;
}
- if (dm_old_con_state->abm_level !=
- dm_new_con_state->abm_level)
+ if (dm_old_con_state->abm_level != dm_new_con_state->abm_level ||
+ dm_old_con_state->scaling != dm_new_con_state->scaling)
new_crtc_state->connectors_changed = true;
}
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c
index c026b393f3c5..940aa621485c 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_hw_sequencer.c
@@ -92,8 +92,8 @@ static const struct out_csc_color_matrix_type output_csc_matrix[] = {
{ 0xE00, 0xF349, 0xFEB7, 0x1000, 0x6CE, 0x16E3,
0x24F, 0x200, 0xFCCB, 0xF535, 0xE00, 0x1000} },
{ COLOR_SPACE_YCBCR2020_TYPE,
- { 0x1000, 0xF149, 0xFEB7, 0x0000, 0x0868, 0x15B2,
- 0x01E6, 0x0000, 0xFB88, 0xF478, 0x1000, 0x0000} },
+ { 0x1000, 0xF149, 0xFEB7, 0x1004, 0x0868, 0x15B2,
+ 0x01E6, 0x201, 0xFB88, 0xF478, 0x1000, 0x1004} },
{ COLOR_SPACE_YCBCR709_BLACK_TYPE,
{ 0x0000, 0x0000, 0x0000, 0x1000, 0x0000, 0x0000,
0x0000, 0x0200, 0x0000, 0x0000, 0x0000, 0x1000} },
diff --git a/drivers/gpu/drm/i915/gt/intel_reset.c b/drivers/gpu/drm/i915/gt/intel_reset.c
index 8cea42379dd7..48aed34e19df 100644
--- a/drivers/gpu/drm/i915/gt/intel_reset.c
+++ b/drivers/gpu/drm/i915/gt/intel_reset.c
@@ -257,6 +257,7 @@ static int ironlake_do_reset(struct intel_gt *gt,
static int gen6_hw_domain_reset(struct intel_gt *gt, u32 hw_domain_mask)
{
struct intel_uncore *uncore = gt->uncore;
+ int loops = 2;
int err;
/*
@@ -264,17 +265,38 @@ static int gen6_hw_domain_reset(struct intel_gt *gt, u32 hw_domain_mask)
* for fifo space for the write or forcewake the chip for
* the read
*/
- intel_uncore_write_fw(uncore, GEN6_GDRST, hw_domain_mask);
+ do {
+ intel_uncore_write_fw(uncore, GEN6_GDRST, hw_domain_mask);
- /* Wait for the device to ack the reset requests */
- err = __intel_wait_for_register_fw(uncore,
- GEN6_GDRST, hw_domain_mask, 0,
- 500, 0,
- NULL);
+ /*
+ * Wait for the device to ack the reset requests.
+ *
+ * On some platforms, e.g. Jasperlake, we see that the
+ * engine register state is not cleared until shortly after
+ * GDRST reports completion, causing a failure as we try
+ * to immediately resume while the internal state is still
+ * in flux. If we immediately repeat the reset, the second
+ * reset appears to serialise with the first, and since
+ * it is a no-op, the registers should retain their reset
+ * value. However, there is still a concern that upon
+ * leaving the second reset, the internal engine state
+ * is still in flux and not ready for resuming.
+ */
+ err = __intel_wait_for_register_fw(uncore, GEN6_GDRST,
+ hw_domain_mask, 0,
+ 2000, 0,
+ NULL);
+ } while (err == 0 && --loops);
if (err)
DRM_DEBUG_DRIVER("Wait for 0x%08x engines reset failed\n",
hw_domain_mask);
+ /*
+ * As we have observed that the engine state is still volatile
+ * after GDRST is acked, impose a small delay to let everything settle.
+ */
+ udelay(50);
+
return err;
}
diff --git a/drivers/gpu/drm/i915/i915_pci.c b/drivers/gpu/drm/i915/i915_pci.c
index 1974e4c78a43..b3f0c20d5ba5 100644
--- a/drivers/gpu/drm/i915/i915_pci.c
+++ b/drivers/gpu/drm/i915/i915_pci.c
@@ -418,7 +418,8 @@ static const struct intel_device_info intel_sandybridge_m_gt2_info = {
.has_coherent_ggtt = true, \
.has_llc = 1, \
.has_rc6 = 1, \
- .has_rc6p = 1, \
+ /* snb does support rc6p, but enabling it causes various issues */ \
+ .has_rc6p = 0, \
.has_rps = true, \
.ppgtt_type = INTEL_PPGTT_FULL, \
.ppgtt_size = 31, \
diff --git a/drivers/infiniband/ulp/srp/ib_srp.h b/drivers/infiniband/ulp/srp/ib_srp.h
index b2861cd2087a..3f17bfd33eb5 100644
--- a/drivers/infiniband/ulp/srp/ib_srp.h
+++ b/drivers/infiniband/ulp/srp/ib_srp.h
@@ -63,9 +63,6 @@ enum {
SRP_DEFAULT_CMD_SQ_SIZE = SRP_DEFAULT_QUEUE_SIZE - SRP_RSP_SQ_SIZE -
SRP_TSK_MGMT_SQ_SIZE,
- SRP_TAG_NO_REQ = ~0U,
- SRP_TAG_TSK_MGMT = 1U << 31,
-
SRP_MAX_PAGES_PER_MR = 512,
SRP_MAX_ADD_CDB_LEN = 16,
@@ -80,6 +77,11 @@ enum {
sizeof(struct srp_imm_buf),
};
+enum {
+ SRP_TAG_NO_REQ = ~0U,
+ SRP_TAG_TSK_MGMT = BIT(31),
+};
+
enum srp_target_state {
SRP_TARGET_SCANNING,
SRP_TARGET_LIVE,
diff --git a/drivers/misc/fastrpc.c b/drivers/misc/fastrpc.c
index 5812ef3345fe..19840ad58a5f 100644
--- a/drivers/misc/fastrpc.c
+++ b/drivers/misc/fastrpc.c
@@ -218,6 +218,13 @@ static void fastrpc_free_map(struct kref *ref)
dma_buf_put(map->buf);
}
+ if (map->fl) {
+ spin_lock(&map->fl->lock);
+ list_del(&map->node);
+ spin_unlock(&map->fl->lock);
+ map->fl = NULL;
+ }
+
kfree(map);
}
@@ -227,10 +234,12 @@ static void fastrpc_map_put(struct fastrpc_map *map)
kref_put(&map->refcount, fastrpc_free_map);
}
-static void fastrpc_map_get(struct fastrpc_map *map)
+static int fastrpc_map_get(struct fastrpc_map *map)
{
- if (map)
- kref_get(&map->refcount);
+ if (!map)
+ return -ENOENT;
+
+ return kref_get_unless_zero(&map->refcount) ? 0 : -ENOENT;
}
static int fastrpc_map_find(struct fastrpc_user *fl, int fd,
@@ -1080,12 +1089,7 @@ static int fastrpc_init_create_process(struct fastrpc_user *fl,
fl->init_mem = NULL;
fastrpc_buf_free(imem);
err_alloc:
- if (map) {
- spin_lock(&fl->lock);
- list_del(&map->node);
- spin_unlock(&fl->lock);
- fastrpc_map_put(map);
- }
+ fastrpc_map_put(map);
err:
kfree(args);
@@ -1161,10 +1165,8 @@ static int fastrpc_device_release(struct inode *inode, struct file *file)
fastrpc_context_put(ctx);
}
- list_for_each_entry_safe(map, m, &fl->maps, node) {
- list_del(&map->node);
+ list_for_each_entry_safe(map, m, &fl->maps, node)
fastrpc_map_put(map);
- }
fastrpc_session_free(cctx, fl->sctx);
fastrpc_channel_ctx_put(cctx);
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
index d577a6b0ceae..519718bb246c 100644
--- a/drivers/mmc/host/sunxi-mmc.c
+++ b/drivers/mmc/host/sunxi-mmc.c
@@ -1456,9 +1456,11 @@ static int sunxi_mmc_remove(struct platform_device *pdev)
struct sunxi_mmc_host *host = mmc_priv(mmc);
mmc_remove_host(mmc);
- pm_runtime_force_suspend(&pdev->dev);
- disable_irq(host->irq);
- sunxi_mmc_disable(host);
+ pm_runtime_disable(&pdev->dev);
+ if (!pm_runtime_status_suspended(&pdev->dev)) {
+ disable_irq(host->irq);
+ sunxi_mmc_disable(host);
+ }
dma_free_coherent(&pdev->dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
mmc_free_host(mmc);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
index 092501eee9aa..6aa175bdadde 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c
@@ -1109,7 +1109,7 @@ static int brcmf_pcie_init_ringbuffers(struct brcmf_pciedev_info *devinfo)
BRCMF_NROF_H2D_COMMON_MSGRINGS;
max_completionrings = BRCMF_NROF_D2H_COMMON_MSGRINGS;
}
- if (max_flowrings > 256) {
+ if (max_flowrings > 512) {
brcmf_err(bus, "invalid max_flowrings(%d)\n", max_flowrings);
return -EIO;
}
diff --git a/drivers/staging/comedi/drivers/adv_pci1760.c b/drivers/staging/comedi/drivers/adv_pci1760.c
index f460f21efb90..0f6faf263c82 100644
--- a/drivers/staging/comedi/drivers/adv_pci1760.c
+++ b/drivers/staging/comedi/drivers/adv_pci1760.c
@@ -59,7 +59,7 @@
#define PCI1760_CMD_CLR_IMB2 0x00 /* Clears IMB2 */
#define PCI1760_CMD_SET_DO 0x01 /* Set output state */
#define PCI1760_CMD_GET_DO 0x02 /* Read output status */
-#define PCI1760_CMD_GET_STATUS 0x03 /* Read current status */
+#define PCI1760_CMD_GET_STATUS 0x07 /* Read current status */
#define PCI1760_CMD_GET_FW_VER 0x0e /* Read firmware version */
#define PCI1760_CMD_GET_HW_VER 0x0f /* Read hardware version */
#define PCI1760_CMD_SET_PWM_HI(x) (0x10 + (x) * 2) /* Set "hi" period */
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index 3bd93558b443..6c0628c58efd 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2642,13 +2642,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud,
else if (mr == ATMEL_US_PAR_ODD)
*parity = 'o';
- /*
- * The serial core only rounds down when matching this to a
- * supported baud rate. Make sure we don't end up slightly
- * lower than one of those, as it would make us fall through
- * to a much lower baud rate than we really want.
- */
- *baud = port->uartclk / (16 * (quot - 1));
+ *baud = port->uartclk / (16 * quot);
}
static int __init atmel_console_setup(struct console *co, char *options)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index a8b6759140dd..317067184bfa 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -776,7 +776,7 @@ static void pch_dma_tx_complete(void *arg)
}
xmit->tail &= UART_XMIT_SIZE - 1;
async_tx_ack(priv->desc_tx);
- dma_unmap_sg(port->dev, sg, priv->orig_nent, DMA_TO_DEVICE);
+ dma_unmap_sg(port->dev, priv->sg_tx_p, priv->orig_nent, DMA_TO_DEVICE);
priv->tx_dma_use = 0;
priv->nent = 0;
priv->orig_nent = 0;
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 50c7df59f7e8..549bf04f29b2 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -41,6 +41,9 @@
#define USB_PRODUCT_USB5534B 0x5534
#define USB_VENDOR_CYPRESS 0x04b4
#define USB_PRODUCT_CY7C65632 0x6570
+#define USB_VENDOR_TEXAS_INSTRUMENTS 0x0451
+#define USB_PRODUCT_TUSB8041_USB3 0x8140
+#define USB_PRODUCT_TUSB8041_USB2 0x8142
#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
@@ -5587,6 +5590,16 @@ static const struct usb_device_id hub_id_table[] = {
.idVendor = USB_VENDOR_GENESYS_LOGIC,
.bInterfaceClass = USB_CLASS_HUB,
.driver_info = HUB_QUIRK_CHECK_PORT_AUTOSUSPEND},
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT,
+ .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS,
+ .idProduct = USB_PRODUCT_TUSB8041_USB2,
+ .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT,
+ .idVendor = USB_VENDOR_TEXAS_INSTRUMENTS,
+ .idProduct = USB_PRODUCT_TUSB8041_USB3,
+ .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
{ .match_flags = USB_DEVICE_ID_MATCH_DEV_CLASS,
.bDeviceClass = USB_CLASS_HUB},
{ .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS,
diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c
index 9043d7242d67..14274b60b47b 100644
--- a/drivers/usb/core/usb-acpi.c
+++ b/drivers/usb/core/usb-acpi.c
@@ -37,6 +37,71 @@ bool usb_acpi_power_manageable(struct usb_device *hdev, int index)
}
EXPORT_SYMBOL_GPL(usb_acpi_power_manageable);
+#define UUID_USB_CONTROLLER_DSM "ce2ee385-00e6-48cb-9f05-2edb927c4899"
+#define USB_DSM_DISABLE_U1_U2_FOR_PORT 5
+
+/**
+ * usb_acpi_port_lpm_incapable - check if lpm should be disabled for a port.
+ * @hdev: USB device belonging to the usb hub
+ * @index: zero based port index
+ *
+ * Some USB3 ports may not support USB3 link power management U1/U2 states
+ * due to different retimer setup. ACPI provides _DSM method which returns 0x01
+ * if U1 and U2 states should be disabled. Evaluate _DSM with:
+ * Arg0: UUID = ce2ee385-00e6-48cb-9f05-2edb927c4899
+ * Arg1: Revision ID = 0
+ * Arg2: Function Index = 5
+ * Arg3: (empty)
+ *
+ * Return 1 if USB3 port is LPM incapable, negative on error, otherwise 0
+ */
+
+int usb_acpi_port_lpm_incapable(struct usb_device *hdev, int index)
+{
+ union acpi_object *obj;
+ acpi_handle port_handle;
+ int port1 = index + 1;
+ guid_t guid;
+ int ret;
+
+ ret = guid_parse(UUID_USB_CONTROLLER_DSM, &guid);
+ if (ret)
+ return ret;
+
+ port_handle = usb_get_hub_port_acpi_handle(hdev, port1);
+ if (!port_handle) {
+ dev_dbg(&hdev->dev, "port-%d no acpi handle\n", port1);
+ return -ENODEV;
+ }
+
+ if (!acpi_check_dsm(port_handle, &guid, 0,
+ BIT(USB_DSM_DISABLE_U1_U2_FOR_PORT))) {
+ dev_dbg(&hdev->dev, "port-%d no _DSM function %d\n",
+ port1, USB_DSM_DISABLE_U1_U2_FOR_PORT);
+ return -ENODEV;
+ }
+
+ obj = acpi_evaluate_dsm(port_handle, &guid, 0,
+ USB_DSM_DISABLE_U1_U2_FOR_PORT, NULL);
+
+ if (!obj)
+ return -ENODEV;
+
+ if (obj->type != ACPI_TYPE_INTEGER) {
+ dev_dbg(&hdev->dev, "evaluate port-%d _DSM failed\n", port1);
+ ACPI_FREE(obj);
+ return -EINVAL;
+ }
+
+ if (obj->integer.value == 0x01)
+ ret = 1;
+
+ ACPI_FREE(obj);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(usb_acpi_port_lpm_incapable);
+
/**
* usb_acpi_set_power_state - control usb port's power via acpi power
* resource
diff --git a/drivers/usb/gadget/function/f_ncm.c b/drivers/usb/gadget/function/f_ncm.c
index 9b19d6935df9..5558ea5ac77a 100644
--- a/drivers/usb/gadget/function/f_ncm.c
+++ b/drivers/usb/gadget/function/f_ncm.c
@@ -85,7 +85,9 @@ static inline struct f_ncm *func_to_ncm(struct usb_function *f)
/* peak (theoretical) bulk transfer rate in bits-per-second */
static inline unsigned ncm_bitrate(struct usb_gadget *g)
{
- if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER_PLUS)
+ if (!g)
+ return 0;
+ else if (gadget_is_superspeed(g) && g->speed >= USB_SPEED_SUPER_PLUS)
return 4250000000U;
else if (gadget_is_superspeed(g) && g->speed == USB_SPEED_SUPER)
return 3750000000U;
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c
index 97c73d610eeb..dd72e75beb82 100644
--- a/drivers/usb/gadget/legacy/inode.c
+++ b/drivers/usb/gadget/legacy/inode.c
@@ -229,6 +229,7 @@ static void put_ep (struct ep_data *data)
*/
static const char *CHIP;
+static DEFINE_MUTEX(sb_mutex); /* Serialize superblock operations */
/*----------------------------------------------------------------------*/
@@ -2013,13 +2014,20 @@ gadgetfs_fill_super (struct super_block *sb, struct fs_context *fc)
{
struct inode *inode;
struct dev_data *dev;
+ int rc;
- if (the_device)
- return -ESRCH;
+ mutex_lock(&sb_mutex);
+
+ if (the_device) {
+ rc = -ESRCH;
+ goto Done;
+ }
CHIP = usb_get_gadget_udc_name();
- if (!CHIP)
- return -ENODEV;
+ if (!CHIP) {
+ rc = -ENODEV;
+ goto Done;
+ }
/* superblock */
sb->s_blocksize = PAGE_SIZE;
@@ -2056,13 +2064,17 @@ gadgetfs_fill_super (struct super_block *sb, struct fs_context *fc)
* from binding to a controller.
*/
the_device = dev;
- return 0;
+ rc = 0;
+ goto Done;
-Enomem:
+ Enomem:
kfree(CHIP);
CHIP = NULL;
+ rc = -ENOMEM;
- return -ENOMEM;
+ Done:
+ mutex_unlock(&sb_mutex);
+ return rc;
}
/* "mount -t gadgetfs path /dev/gadget" ends up here */
@@ -2084,6 +2096,7 @@ static int gadgetfs_init_fs_context(struct fs_context *fc)
static void
gadgetfs_kill_sb (struct super_block *sb)
{
+ mutex_lock(&sb_mutex);
kill_litter_super (sb);
if (the_device) {
put_dev (the_device);
@@ -2091,6 +2104,7 @@ gadgetfs_kill_sb (struct super_block *sb)
}
kfree(CHIP);
CHIP = NULL;
+ mutex_unlock(&sb_mutex);
}
/*----------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/legacy/webcam.c b/drivers/usb/gadget/legacy/webcam.c
index 2c9eab2b863d..ff970a943347 100644
--- a/drivers/usb/gadget/legacy/webcam.c
+++ b/drivers/usb/gadget/legacy/webcam.c
@@ -293,6 +293,7 @@ static const struct uvc_descriptor_header * const uvc_fs_streaming_cls[] = {
(const struct uvc_descriptor_header *) &uvc_format_yuv,
(const struct uvc_descriptor_header *) &uvc_frame_yuv_360p,
(const struct uvc_descriptor_header *) &uvc_frame_yuv_720p,
+ (const struct uvc_descriptor_header *) &uvc_color_matching,
(const struct uvc_descriptor_header *) &uvc_format_mjpg,
(const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p,
(const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p,
@@ -305,6 +306,7 @@ static const struct uvc_descriptor_header * const uvc_hs_streaming_cls[] = {
(const struct uvc_descriptor_header *) &uvc_format_yuv,
(const struct uvc_descriptor_header *) &uvc_frame_yuv_360p,
(const struct uvc_descriptor_header *) &uvc_frame_yuv_720p,
+ (const struct uvc_descriptor_header *) &uvc_color_matching,
(const struct uvc_descriptor_header *) &uvc_format_mjpg,
(const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p,
(const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p,
@@ -317,6 +319,7 @@ static const struct uvc_descriptor_header * const uvc_ss_streaming_cls[] = {
(const struct uvc_descriptor_header *) &uvc_format_yuv,
(const struct uvc_descriptor_header *) &uvc_frame_yuv_360p,
(const struct uvc_descriptor_header *) &uvc_frame_yuv_720p,
+ (const struct uvc_descriptor_header *) &uvc_color_matching,
(const struct uvc_descriptor_header *) &uvc_format_mjpg,
(const struct uvc_descriptor_header *) &uvc_frame_mjpg_360p,
(const struct uvc_descriptor_header *) &uvc_frame_mjpg_720p,
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 9e9c232e896f..b66cc64f084c 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -29,7 +29,7 @@
#include "ehci-fsl.h"
#define DRIVER_DESC "Freescale EHCI Host controller driver"
-#define DRV_NAME "ehci-fsl"
+#define DRV_NAME "fsl-ehci"
static struct hc_driver __read_mostly fsl_ehci_hc_driver;
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 8bd55e51ecfc..aa4c21a12de7 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -79,9 +79,12 @@ static const char hcd_name[] = "xhci_hcd";
static struct hc_driver __read_mostly xhci_pci_hc_driver;
static int xhci_pci_setup(struct usb_hcd *hcd);
+static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+ struct usb_tt *tt, gfp_t mem_flags);
static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
.reset = xhci_pci_setup,
+ .update_hub_device = xhci_pci_update_hub_device,
};
/* called after powerup, by probe or system-pm "wakeup" */
@@ -336,8 +339,38 @@ static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
NULL);
ACPI_FREE(obj);
}
+
+static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_hub *rhub = &xhci->usb3_rhub;
+ int ret;
+ int i;
+
+ /* This is not the usb3 roothub we are looking for */
+ if (hcd != rhub->hcd)
+ return;
+
+ if (hdev->maxchild > rhub->num_ports) {
+ dev_err(&hdev->dev, "USB3 roothub port number mismatch\n");
+ return;
+ }
+
+ for (i = 0; i < hdev->maxchild; i++) {
+ ret = usb_acpi_port_lpm_incapable(hdev, i);
+
+ dev_dbg(&hdev->dev, "port-%d disable U1/U2 _DSM: %d\n", i + 1, ret);
+
+ if (ret >= 0) {
+ rhub->ports[i]->lpm_incapable = ret;
+ continue;
+ }
+ }
+}
+
#else
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
+static void xhci_find_lpm_incapable_ports(struct usb_hcd *hcd, struct usb_device *hdev) { }
#endif /* CONFIG_ACPI */
/* called during probe() after chip reset completes */
@@ -370,6 +403,16 @@ static int xhci_pci_setup(struct usb_hcd *hcd)
return xhci_pci_reinit(xhci, pdev);
}
+static int xhci_pci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+ struct usb_tt *tt, gfp_t mem_flags)
+{
+ /* Check if acpi claims some USB3 roothub ports are lpm incapable */
+ if (!hdev->parent)
+ xhci_find_lpm_incapable_ports(hcd, hdev);
+
+ return xhci_update_hub_device(hcd, hdev, tt, mem_flags);
+}
+
/*
* We need to register our own PCI probe function (instead of the USB core's
* function) in order to create a second roothub under xHCI.
@@ -427,6 +470,8 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
if (xhci->quirks & XHCI_DEFAULT_PM_RUNTIME_ALLOW)
pm_runtime_allow(&dev->dev);
+ dma_set_max_seg_size(&dev->dev, UINT_MAX);
+
return 0;
put_usb3_hcd:
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 6cedae902adf..e6faabe65bd5 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -921,7 +921,10 @@ static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci,
struct xhci_virt_ep *ep;
struct xhci_ring *ring;
- ep = &xhci->devs[slot_id]->eps[ep_index];
+ ep = xhci_get_virt_ep(xhci, slot_id, ep_index);
+ if (!ep)
+ return;
+
if ((ep->ep_state & EP_HAS_STREAMS) ||
(ep->ep_state & EP_GETTING_NO_STREAMS)) {
int stream_id;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 3537113f006f..35d96796854d 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3909,6 +3909,7 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
struct xhci_virt_device *virt_dev;
struct xhci_slot_ctx *slot_ctx;
+ unsigned long flags;
int i, ret;
/*
@@ -3937,7 +3938,11 @@ static void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev)
}
virt_dev->udev = NULL;
xhci_disable_slot(xhci, udev->slot_id);
+
+ spin_lock_irqsave(&xhci->lock, flags);
xhci_free_virt_device(xhci, udev->slot_id);
+ spin_unlock_irqrestore(&xhci->lock, flags);
+
}
int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id)
@@ -4994,6 +4999,7 @@ static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
struct usb_device *udev, enum usb3_link_state state)
{
struct xhci_hcd *xhci;
+ struct xhci_port *port;
u16 hub_encoded_timeout;
int mel;
int ret;
@@ -5007,6 +5013,13 @@ static int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
!xhci->devs[udev->slot_id])
return USB3_LPM_DISABLED;
+ /* If connected to root port then check port can handle lpm */
+ if (udev->parent && !udev->parent->parent) {
+ port = xhci->usb3_rhub.ports[udev->portnum - 1];
+ if (port->lpm_incapable)
+ return USB3_LPM_DISABLED;
+ }
+
hub_encoded_timeout = xhci_calculate_lpm_timeout(hcd, udev, state);
mel = calculate_max_exit_latency(udev, state, hub_encoded_timeout);
if (mel < 0) {
@@ -5066,7 +5079,7 @@ static int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
/* Once a hub descriptor is fetched for a device, we need to update the xHC's
* internal data structures for the device.
*/
-static int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
struct usb_tt *tt, gfp_t mem_flags)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -5166,6 +5179,7 @@ static int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
xhci_free_command(xhci, config_cmd);
return ret;
}
+EXPORT_SYMBOL_GPL(xhci_update_hub_device);
static int xhci_get_frame(struct usb_hcd *hcd)
{
@@ -5435,6 +5449,8 @@ void xhci_init_driver(struct hc_driver *drv,
drv->check_bandwidth = over->check_bandwidth;
if (over->reset_bandwidth)
drv->reset_bandwidth = over->reset_bandwidth;
+ if (over->update_hub_device)
+ drv->update_hub_device = over->update_hub_device;
}
}
EXPORT_SYMBOL_GPL(xhci_init_driver);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 0dc448630197..e696f1508318 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1724,6 +1724,7 @@ struct xhci_port {
int hcd_portnum;
struct xhci_hub *rhub;
struct xhci_port_cap *port_cap;
+ unsigned int lpm_incapable:1;
};
struct xhci_hub {
@@ -1922,6 +1923,8 @@ struct xhci_driver_overrides {
int (*start)(struct usb_hcd *hcd);
int (*check_bandwidth)(struct usb_hcd *, struct usb_device *);
void (*reset_bandwidth)(struct usb_hcd *, struct usb_device *);
+ int (*update_hub_device)(struct usb_hcd *hcd, struct usb_device *hdev,
+ struct usb_tt *tt, gfp_t mem_flags);
};
#define XHCI_CFC_DELAY 10
@@ -2076,6 +2079,8 @@ void xhci_init_driver(struct hc_driver *drv,
const struct xhci_driver_overrides *over);
int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
+int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
+ struct usb_tt *tt, gfp_t mem_flags);
int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);
int xhci_ext_cap_init(struct xhci_hcd *xhci);
diff --git a/drivers/usb/misc/iowarrior.c b/drivers/usb/misc/iowarrior.c
index 888defdea546..c366a65fbd80 100644
--- a/drivers/usb/misc/iowarrior.c
+++ b/drivers/usb/misc/iowarrior.c
@@ -817,7 +817,7 @@ static int iowarrior_probe(struct usb_interface *interface,
break;
case USB_DEVICE_ID_CODEMERCS_IOW100:
- dev->report_size = 13;
+ dev->report_size = 12;
break;
}
}
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 9992c5aa5ff4..4cd46fc9fcad 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -61,6 +61,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x0846, 0x1100) }, /* NetGear Managed Switch M4100 series, M5300 series, M7100 series */
{ USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
{ USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+ { USB_DEVICE(0x0908, 0x0070) }, /* Siemens SCALANCE LPE-9000 USB Serial Console */
{ USB_DEVICE(0x0908, 0x01FF) }, /* Siemens RUGGEDCOM USB Serial Console */
{ USB_DEVICE(0x0988, 0x0578) }, /* Teraoka AD2000 */
{ USB_DEVICE(0x0B00, 0x3070) }, /* Ingenico 3070 */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 08a368a0f745..159b01b9e172 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -255,10 +255,16 @@ static void option_instat_callback(struct urb *urb);
#define QUECTEL_PRODUCT_EP06 0x0306
#define QUECTEL_PRODUCT_EM05G 0x030a
#define QUECTEL_PRODUCT_EM060K 0x030b
+#define QUECTEL_PRODUCT_EM05G_CS 0x030c
+#define QUECTEL_PRODUCT_EM05CN_SG 0x0310
#define QUECTEL_PRODUCT_EM05G_SG 0x0311
+#define QUECTEL_PRODUCT_EM05CN 0x0312
+#define QUECTEL_PRODUCT_EM05G_GR 0x0313
+#define QUECTEL_PRODUCT_EM05G_RS 0x0314
#define QUECTEL_PRODUCT_EM12 0x0512
#define QUECTEL_PRODUCT_RM500Q 0x0800
#define QUECTEL_PRODUCT_RM520N 0x0801
+#define QUECTEL_PRODUCT_EC200U 0x0901
#define QUECTEL_PRODUCT_EC200S_CN 0x6002
#define QUECTEL_PRODUCT_EC200T 0x6026
#define QUECTEL_PRODUCT_RM500K 0x7001
@@ -1159,8 +1165,18 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0xff, 0xff),
.driver_info = RSVD(1) | RSVD(2) | RSVD(3) | RSVD(4) | NUMEP2 },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06, 0xff, 0, 0) },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05CN, 0xff),
+ .driver_info = RSVD(6) | ZLP },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05CN_SG, 0xff),
+ .driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G, 0xff),
.driver_info = RSVD(6) | ZLP },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_GR, 0xff),
+ .driver_info = RSVD(6) | ZLP },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_CS, 0xff),
+ .driver_info = RSVD(6) | ZLP },
+ { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_RS, 0xff),
+ .driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM05G_SG, 0xff),
.driver_info = RSVD(6) | ZLP },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM060K, 0xff, 0x00, 0x40) },
@@ -1180,6 +1196,7 @@ static const struct usb_device_id option_ids[] = {
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0xff, 0x30) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0x40) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM520N, 0xff, 0, 0) },
+ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200U, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200S_CN, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC200T, 0xff, 0, 0) },
{ USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500K, 0xff, 0x00, 0x00) },
diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h
index 3734a25e09e5..44f0b78be8a9 100644
--- a/drivers/usb/storage/uas-detect.h
+++ b/drivers/usb/storage/uas-detect.h
@@ -116,6 +116,19 @@ static int uas_use_uas_driver(struct usb_interface *intf,
if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bc2)
flags |= US_FL_NO_ATA_1X;
+ /*
+ * RTL9210-based enclosure from HIKSEMI, MD202 reportedly have issues
+ * with UAS. This isn't distinguishable with just idVendor and
+ * idProduct, use manufacturer and product too.
+ *
+ * Reported-by: Hongling Zeng <zenghongling@kylinos.cn>
+ */
+ if (le16_to_cpu(udev->descriptor.idVendor) == 0x0bda &&
+ le16_to_cpu(udev->descriptor.idProduct) == 0x9210 &&
+ (udev->manufacturer && !strcmp(udev->manufacturer, "HIKSEMI")) &&
+ (udev->product && !strcmp(udev->product, "MD202")))
+ flags |= US_FL_IGNORE_UAS;
+
usb_stor_adjust_quirks(udev, &flags);
if (flags & US_FL_IGNORE_UAS) {
diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h
index 92e9bd006622..d4fa29b623ff 100644
--- a/drivers/usb/storage/unusual_uas.h
+++ b/drivers/usb/storage/unusual_uas.h
@@ -83,13 +83,6 @@ UNUSUAL_DEV(0x0bc2, 0x331a, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_REPORT_LUNS),
-/* Reported-by: Hongling Zeng <zenghongling@kylinos.cn> */
-UNUSUAL_DEV(0x0bda, 0x9210, 0x0000, 0x9999,
- "Hiksemi",
- "External HDD",
- USB_SC_DEVICE, USB_PR_DEVICE, NULL,
- US_FL_IGNORE_UAS),
-
/* Reported-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> */
UNUSUAL_DEV(0x13fd, 0x3940, 0x0000, 0x9999,
"Initio Corporation",
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c
index 0b5cbf5ed1ca..1aa1bd991ef4 100644
--- a/drivers/usb/typec/altmodes/displayport.c
+++ b/drivers/usb/typec/altmodes/displayport.c
@@ -407,6 +407,18 @@ static const char * const pin_assignments[] = {
[DP_PIN_ASSIGN_F] = "F",
};
+/*
+ * Helper function to extract a peripheral's currently supported
+ * Pin Assignments from its DisplayPort alternate mode state.
+ */
+static u8 get_current_pin_assignments(struct dp_altmode *dp)
+{
+ if (DP_CONF_CURRENTLY(dp->data.conf) == DP_CONF_DFP_D)
+ return DP_CAP_PIN_ASSIGN_DFP_D(dp->alt->vdo);
+ else
+ return DP_CAP_PIN_ASSIGN_UFP_D(dp->alt->vdo);
+}
+
static ssize_t
pin_assignment_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t size)
@@ -433,10 +445,7 @@ pin_assignment_store(struct device *dev, struct device_attribute *attr,
goto out_unlock;
}
- if (DP_CONF_CURRENTLY(dp->data.conf) == DP_CONF_DFP_D)
- assignments = DP_CAP_UFP_D_PIN_ASSIGN(dp->alt->vdo);
- else
- assignments = DP_CAP_DFP_D_PIN_ASSIGN(dp->alt->vdo);
+ assignments = get_current_pin_assignments(dp);
if (!(DP_CONF_GET_PIN_ASSIGN(conf) & assignments)) {
ret = -EINVAL;
@@ -473,10 +482,7 @@ static ssize_t pin_assignment_show(struct device *dev,
cur = get_count_order(DP_CONF_GET_PIN_ASSIGN(dp->data.conf));
- if (DP_CONF_CURRENTLY(dp->data.conf) == DP_CONF_DFP_D)
- assignments = DP_CAP_UFP_D_PIN_ASSIGN(dp->alt->vdo);
- else
- assignments = DP_CAP_DFP_D_PIN_ASSIGN(dp->alt->vdo);
+ assignments = get_current_pin_assignments(dp);
for (i = 0; assignments; assignments >>= 1, i++) {
if (assignments & 1) {
diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c
index 5c8507e74bc1..353e89efdebf 100644
--- a/fs/btrfs/qgroup.c
+++ b/fs/btrfs/qgroup.c
@@ -3209,6 +3209,7 @@ static void btrfs_qgroup_rescan_worker(struct btrfs_work *work)
int err = -ENOMEM;
int ret = 0;
bool stopped = false;
+ bool did_leaf_rescans = false;
path = btrfs_alloc_path();
if (!path)
@@ -3229,6 +3230,7 @@ static void btrfs_qgroup_rescan_worker(struct btrfs_work *work)
}
err = qgroup_rescan_leaf(trans, path);
+ did_leaf_rescans = true;
if (err > 0)
btrfs_commit_transaction(trans);
@@ -3249,16 +3251,23 @@ static void btrfs_qgroup_rescan_worker(struct btrfs_work *work)
mutex_unlock(&fs_info->qgroup_rescan_lock);
/*
- * only update status, since the previous part has already updated the
- * qgroup info.
+ * Only update status, since the previous part has already updated the
+ * qgroup info, and only if we did any actual work. This also prevents
+ * race with a concurrent quota disable, which has already set
+ * fs_info->quota_root to NULL and cleared BTRFS_FS_QUOTA_ENABLED at
+ * btrfs_quota_disable().
*/
- trans = btrfs_start_transaction(fs_info->quota_root, 1);
- if (IS_ERR(trans)) {
- err = PTR_ERR(trans);
+ if (did_leaf_rescans) {
+ trans = btrfs_start_transaction(fs_info->quota_root, 1);
+ if (IS_ERR(trans)) {
+ err = PTR_ERR(trans);
+ trans = NULL;
+ btrfs_err(fs_info,
+ "fail to start transaction for status update: %d",
+ err);
+ }
+ } else {
trans = NULL;
- btrfs_err(fs_info,
- "fail to start transaction for status update: %d",
- err);
}
mutex_lock(&fs_info->qgroup_rescan_lock);
diff --git a/fs/cifs/smb2pdu.c b/fs/cifs/smb2pdu.c
index ec2dbb8df3d3..da1a1b531ca5 100644
--- a/fs/cifs/smb2pdu.c
+++ b/fs/cifs/smb2pdu.c
@@ -3639,12 +3639,15 @@ smb2_readv_callback(struct mid_q_entry *mid)
(struct smb2_sync_hdr *)rdata->iov[0].iov_base;
struct cifs_credits credits = { .value = 0, .instance = 0 };
struct smb_rqst rqst = { .rq_iov = &rdata->iov[1],
- .rq_nvec = 1,
- .rq_pages = rdata->pages,
- .rq_offset = rdata->page_offset,
- .rq_npages = rdata->nr_pages,
- .rq_pagesz = rdata->pagesz,
- .rq_tailsz = rdata->tailsz };
+ .rq_nvec = 1, };
+
+ if (rdata->got_bytes) {
+ rqst.rq_pages = rdata->pages;
+ rqst.rq_offset = rdata->page_offset;
+ rqst.rq_npages = rdata->nr_pages;
+ rqst.rq_pagesz = rdata->pagesz;
+ rqst.rq_tailsz = rdata->tailsz;
+ }
cifs_dbg(FYI, "%s: mid=%llu state=%d result=%d bytes=%u\n",
__func__, mid->mid, mid->mid_state, rdata->result,
diff --git a/fs/f2fs/extent_cache.c b/fs/f2fs/extent_cache.c
index 05b17a741ccc..dd53c9294ad9 100644
--- a/fs/f2fs/extent_cache.c
+++ b/fs/f2fs/extent_cache.c
@@ -381,7 +381,8 @@ static bool f2fs_lookup_extent_tree(struct inode *inode, pgoff_t pgofs,
struct extent_node *en;
bool ret = false;
- f2fs_bug_on(sbi, !et);
+ if (!et)
+ return false;
trace_f2fs_lookup_extent_tree_start(inode, pgofs);
diff --git a/fs/nfs/filelayout/filelayout.c b/fs/nfs/filelayout/filelayout.c
index 98b74cdabb99..8c72718d9fe0 100644
--- a/fs/nfs/filelayout/filelayout.c
+++ b/fs/nfs/filelayout/filelayout.c
@@ -837,6 +837,12 @@ filelayout_alloc_lseg(struct pnfs_layout_hdr *layoutid,
return &fl->generic_hdr;
}
+static bool
+filelayout_lseg_is_striped(const struct nfs4_filelayout_segment *flseg)
+{
+ return flseg->num_fh > 1;
+}
+
/*
* filelayout_pg_test(). Called by nfs_can_coalesce_requests()
*
@@ -857,6 +863,8 @@ filelayout_pg_test(struct nfs_pageio_descriptor *pgio, struct nfs_page *prev,
size = pnfs_generic_pg_test(pgio, prev, req);
if (!size)
return 0;
+ else if (!filelayout_lseg_is_striped(FILELAYOUT_LSEG(pgio->pg_lseg)))
+ return size;
/* see if req and prev are in the same stripe */
if (prev) {
diff --git a/fs/nilfs2/btree.c b/fs/nilfs2/btree.c
index 919d1238ce45..a0e37530dcf3 100644
--- a/fs/nilfs2/btree.c
+++ b/fs/nilfs2/btree.c
@@ -480,9 +480,18 @@ static int __nilfs_btree_get_block(const struct nilfs_bmap *btree, __u64 ptr,
ret = nilfs_btnode_submit_block(btnc, ptr, 0, REQ_OP_READ, 0, &bh,
&submit_ptr);
if (ret) {
- if (ret != -EEXIST)
- return ret;
- goto out_check;
+ if (likely(ret == -EEXIST))
+ goto out_check;
+ if (ret == -ENOENT) {
+ /*
+ * Block address translation failed due to invalid
+ * value of 'ptr'. In this case, return internal code
+ * -EINVAL (broken bmap) to notify bmap layer of fatal
+ * metadata corruption.
+ */
+ ret = -EINVAL;
+ }
+ return ret;
}
if (ra) {
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 703c7464d895..c4e919cbbec7 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -751,11 +751,14 @@ extern void usb_queue_reset_device(struct usb_interface *dev);
extern int usb_acpi_set_power_state(struct usb_device *hdev, int index,
bool enable);
extern bool usb_acpi_power_manageable(struct usb_device *hdev, int index);
+extern int usb_acpi_port_lpm_incapable(struct usb_device *hdev, int index);
#else
static inline int usb_acpi_set_power_state(struct usb_device *hdev, int index,
bool enable) { return 0; }
static inline bool usb_acpi_power_manageable(struct usb_device *hdev, int index)
{ return true; }
+static inline int usb_acpi_port_lpm_incapable(struct usb_device *hdev, int index)
+ { return 0; }
#endif
/* USB autosuspend and autoresume */
diff --git a/kernel/sys.c b/kernel/sys.c
index b075fe84eb5a..f6d6ce8da3e4 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1534,6 +1534,8 @@ int do_prlimit(struct task_struct *tsk, unsigned int resource,
if (resource >= RLIM_NLIMITS)
return -EINVAL;
+ resource = array_index_nospec(resource, RLIM_NLIMITS);
+
if (new_rlim) {
if (new_rlim->rlim_cur > new_rlim->rlim_max)
return -EINVAL;
diff --git a/mm/khugepaged.c b/mm/khugepaged.c
index 8e67d2e5ff39..f1f98305433e 100644
--- a/mm/khugepaged.c
+++ b/mm/khugepaged.c
@@ -1328,14 +1328,6 @@ void collapse_pte_mapped_thp(struct mm_struct *mm, unsigned long addr)
if (!hugepage_vma_check(vma, vma->vm_flags | VM_HUGEPAGE))
return;
- /*
- * Symmetry with retract_page_tables(): Exclude MAP_PRIVATE mappings
- * that got written to. Without this, we'd have to also lock the
- * anon_vma if one exists.
- */
- if (vma->anon_vma)
- return;
-
hpage = find_lock_page(vma->vm_file->f_mapping,
linear_page_index(vma, haddr));
if (!hpage)
@@ -1407,6 +1399,10 @@ void collapse_pte_mapped_thp(struct mm_struct *mm, unsigned long addr)
}
/* step 4: collapse pmd */
+ /* we make no change to anon, but protect concurrent anon page lookup */
+ if (vma->anon_vma)
+ anon_vma_lock_write(vma->anon_vma);
+
mmu_notifier_range_init(&range, MMU_NOTIFY_CLEAR, 0, NULL, mm, haddr,
haddr + HPAGE_PMD_SIZE);
mmu_notifier_invalidate_range_start(&range);
@@ -1416,6 +1412,8 @@ void collapse_pte_mapped_thp(struct mm_struct *mm, unsigned long addr)
mmu_notifier_invalidate_range_end(&range);
pte_free(mm, pmd_pgtable(_pmd));
+ if (vma->anon_vma)
+ anon_vma_unlock_write(vma->anon_vma);
i_mmap_unlock_write(vma->vm_file->f_mapping);
drop_hpage:
diff --git a/net/core/ethtool.c b/net/core/ethtool.c
index cbd1885f2459..9ae38c3e2bf0 100644
--- a/net/core/ethtool.c
+++ b/net/core/ethtool.c
@@ -1947,7 +1947,8 @@ static int ethtool_get_phy_stats(struct net_device *dev, void __user *useraddr)
return n_stats;
if (n_stats > S32_MAX / sizeof(u64))
return -ENOMEM;
- WARN_ON_ONCE(!n_stats);
+ if (WARN_ON_ONCE(!n_stats))
+ return -EOPNOTSUPP;
if (copy_from_user(&stats, useraddr, sizeof(stats)))
return -EFAULT;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index ee4f70cea76e..413d4886f3d2 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -3503,6 +3503,15 @@ static void alc256_init(struct hda_codec *codec)
hda_nid_t hp_pin = alc_get_hp_pin(spec);
bool hp_pin_sense;
+ if (spec->ultra_low_power) {
+ alc_update_coef_idx(codec, 0x03, 1<<1, 1<<1);
+ alc_update_coef_idx(codec, 0x08, 3<<2, 3<<2);
+ alc_update_coef_idx(codec, 0x08, 7<<4, 0);
+ alc_update_coef_idx(codec, 0x3b, 1<<15, 0);
+ alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
+ msleep(30);
+ }
+
if (!hp_pin)
hp_pin = 0x21;
@@ -3514,14 +3523,6 @@ static void alc256_init(struct hda_codec *codec)
msleep(2);
alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x1); /* Low power */
- if (spec->ultra_low_power) {
- alc_update_coef_idx(codec, 0x03, 1<<1, 1<<1);
- alc_update_coef_idx(codec, 0x08, 3<<2, 3<<2);
- alc_update_coef_idx(codec, 0x08, 7<<4, 0);
- alc_update_coef_idx(codec, 0x3b, 1<<15, 0);
- alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
- msleep(30);
- }
snd_hda_codec_write(codec, hp_pin, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
@@ -3603,6 +3604,13 @@ static void alc225_init(struct hda_codec *codec)
hda_nid_t hp_pin = alc_get_hp_pin(spec);
bool hp1_pin_sense, hp2_pin_sense;
+ if (spec->ultra_low_power) {
+ alc_update_coef_idx(codec, 0x08, 0x0f << 2, 3<<2);
+ alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
+ alc_update_coef_idx(codec, 0x33, 1<<11, 0);
+ msleep(30);
+ }
+
if (!hp_pin)
hp_pin = 0x21;
msleep(30);
@@ -3614,12 +3622,6 @@ static void alc225_init(struct hda_codec *codec)
msleep(2);
alc_update_coefex_idx(codec, 0x57, 0x04, 0x0007, 0x1); /* Low power */
- if (spec->ultra_low_power) {
- alc_update_coef_idx(codec, 0x08, 0x0f << 2, 3<<2);
- alc_update_coef_idx(codec, 0x0e, 7<<6, 7<<6);
- alc_update_coef_idx(codec, 0x33, 1<<11, 0);
- msleep(30);
- }
if (hp1_pin_sense || spec->ultra_low_power)
snd_hda_codec_write(codec, hp_pin, 0,
diff --git a/tools/testing/selftests/bpf/prog_tests/jeq_infer_not_null.c b/tools/testing/selftests/bpf/prog_tests/jeq_infer_not_null.c
new file mode 100644
index 000000000000..3add34df5767
--- /dev/null
+++ b/tools/testing/selftests/bpf/prog_tests/jeq_infer_not_null.c
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <test_progs.h>
+#include "jeq_infer_not_null_fail.skel.h"
+
+void test_jeq_infer_not_null(void)
+{
+ RUN_TESTS(jeq_infer_not_null_fail);
+}
diff --git a/tools/testing/selftests/bpf/progs/jeq_infer_not_null_fail.c b/tools/testing/selftests/bpf/progs/jeq_infer_not_null_fail.c
new file mode 100644
index 000000000000..f46965053acb
--- /dev/null
+++ b/tools/testing/selftests/bpf/progs/jeq_infer_not_null_fail.c
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "vmlinux.h"
+#include <bpf/bpf_helpers.h>
+#include "bpf_misc.h"
+
+char _license[] SEC("license") = "GPL";
+
+struct {
+ __uint(type, BPF_MAP_TYPE_HASH);
+ __uint(max_entries, 1);
+ __type(key, u64);
+ __type(value, u64);
+} m_hash SEC(".maps");
+
+SEC("?raw_tp")
+__failure __msg("R8 invalid mem access 'map_value_or_null")
+int jeq_infer_not_null_ptr_to_btfid(void *ctx)
+{
+ struct bpf_map *map = (struct bpf_map *)&m_hash;
+ struct bpf_map *inner_map = map->inner_map_meta;
+ u64 key = 0, ret = 0, *val;
+
+ val = bpf_map_lookup_elem(map, &key);
+ /* Do not mark ptr as non-null if one of them is
+ * PTR_TO_BTF_ID (R9), reject because of invalid
+ * access to map value (R8).
+ *
+ * Here, we need to inline those insns to access
+ * R8 directly, since compiler may use other reg
+ * once it figures out val==inner_map.
+ */
+ asm volatile("r8 = %[val];\n"
+ "r9 = %[inner_map];\n"
+ "if r8 != r9 goto +1;\n"
+ "%[ret] = *(u64 *)(r8 +0);\n"
+ : [ret] "+r"(ret)
+ : [inner_map] "r"(inner_map), [val] "r"(val)
+ : "r8", "r9");
+
+ return ret;
+}
prev parent reply other threads:[~2023-01-24 6:29 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-01-24 6:28 Linux 5.4.230 Greg Kroah-Hartman
2023-01-24 6:28 ` Greg Kroah-Hartman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16745417182339@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.