From: "Gerald Nowitzky" <Nowitzky@igne.de>
To: linux-driver@qlogic.com, linux-scsi@vger.kernel.org
Subject: QLA2xxx on Dell M600
Date: Tue, 24 Feb 2009 12:00:10 +0100 [thread overview]
Message-ID: <169201c9966f$0fea9d60$0a00a8c0@ALDI2> (raw)
Hello!
I tried to use the qla2xxx on 2.6.28.7 with Dell Blade M600 and QME2472
Mezzanine Card, using x86 / 64 bit.
It OOPSes. The OOPS was introduced with 2.6.27.1 (qla2xxx 8.02.01-k7) . The
older 2.6.26.8 (qla2xxx 8.02.01-k4) works fine.
(Gerald)
[ 18.162122] QLogic Fibre Channel HBA Driver: 8.02.01-k9
[ 18.162180] qla2xxx 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ
18
[ 18.162330] qla2xxx 0000:09:00.0: Found an ISP2432, irq 18, iobase
0xffffc200
1259c000
[ 18.162570] qla2xxx 0000:09:00.0: Configuring PCI space...
[ 18.162575] qla2xxx 0000:09:00.0: setting latency timer to 64
[ 18.195046] qla2xxx 0000:09:00.0: Configure NVRAM parameters...
[ 18.205078] usb usb2: suspend_rh (auto-stop)
[ 18.206352] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms
status 0x
301
[ 18.230605] BUG: unable to handle kernel NULL pointer dereference at
00000000
00000000
[ 18.231190] IP: [<ffffffff81230ce7>] strncpy+0x9/0x23
[ 18.231190] PGD 42bc2a067 PUD 42c139067 PMD 0
[ 18.231190] Oops: 0000 [#1] SMP
[ 18.231190] last sysfs file:
/sys/devices/pci0000:00/0000:00:03.0/0000:08:00.
0/host0/target0:1:0/0:1:0:0/type
[ 18.231190] CPU 3
[ 18.231190] Modules linked in: qla2xxx(+)
[ 18.231190] Pid: 1432, comm: modprobe Not tainted 2.6.28.7 #4
[ 18.231190] RIP: 0010:[<ffffffff81230ce7>] [<ffffffff81230ce7>]
strncpy+0x9/
0x23
[ 18.231190] RSP: 0018:ffff88042bccd9f8 EFLAGS: 00010202
[ 18.231190] RAX: 00000000000005b0 RBX: 0000000000000010 RCX:
ffff88042b83ab17
[ 18.231190] RDX: 000000000000004f RSI: 0000000000000000 RDI:
ffff88042b83ab17
[ 18.231190] RBP: ffff88042bccd9f8 R08: 0000000000000000 R09:
ffff88042c130000
[ 18.231190] R10: 0000000000000000 R11: ffff88042b838690 R12:
ffff88042b83ab06
[ 18.231190] R13: ffff88042b838690 R14: ffff88042d2851e0 R15:
0000000000000000
[ 18.231190] FS: 00007f95a58606f0(0000) GS:ffff88042e447700(0000)
knlGS:00000
00000000000
[ 18.231190] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 18.231190] CR2: 0000000000000000 CR3: 000000042c18d000 CR4:
00000000000006a0
[ 18.231190] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
0000000000000000
[ 18.231190] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
0000000000000400
[ 18.231190] Process modprobe (pid: 1432, threadinfo ffff88042bccc000,
task ff
ff88042cef6cc0)
[ 18.231190] Stack:
[ 18.231190] ffff88042bccda28 ffffffffa0003376 ffff88042c130000
ffff88042b838
690
[ 18.231190] ffff88042d285000 ffff88042b838690 ffff88042bccda78
ffffffffa0006
764
[ 18.231190] ffff88042bccda78 ffffffffa0015a0f ffff88042c130000
ffff88042dcd9
1b0
[ 18.231190] Call Trace:
[ 18.231190] [<ffffffffa0003376>] qla2x00_set_model_info+0xec/0x121
[qla2xxx]
[ 18.231190] [<ffffffffa0006764>] qla24xx_nvram_config+0x2da/0x5f1
[qla2xxx]
[ 18.231190] [<ffffffffa0015a0f>] ? qla24xx_get_flash_version+0x1e5/0x296
[ql
a2xxx]
[ 18.231190] [<ffffffffa00071a7>] qla2x00_initialize_adapter+0x169/0x388
[qla
2xxx]
[ 18.231190] [<ffffffff81026697>] ? x86_swiotlb_alloc_coherent+0x1b/0x3c
[ 18.231190] [<ffffffffa001bd71>] qla2x00_probe_one+0xbac/0xefd [qla2xxx]
[ 18.231190] [<ffffffff810bba6d>] ? ifind+0x60/0x78
[ 18.231190] [<ffffffff810bb784>] ? iput+0x2f/0x65
[ 18.231190] [<ffffffff8102f720>] ? task_rq_lock+0x40/0x75
[ 18.231190] [<ffffffff8102f133>] ? task_rq_unlock+0xc/0xe
[ 18.231190] [<ffffffff81034eb9>] ? set_cpus_allowed_ptr+0x10a/0x117
[ 18.231190] [<ffffffff8123e0a0>] ? pci_match_id+0x1f/0x43
[ 18.231190] [<ffffffff8123e8f9>] pci_device_probe+0xb6/0x10f
[ 18.231190] [<ffffffff810f802b>] ? sysfs_create_link+0xe/0x13
[ 18.231190] [<ffffffff812bf922>] driver_probe_device+0xd9/0x169
[ 18.231190] [<ffffffff812bfa14>] __driver_attach+0x62/0x8c
[ 18.231190] [<ffffffff812bf9b2>] ? __driver_attach+0x0/0x8c
[ 18.231190] [<ffffffff812bf9b2>] ? __driver_attach+0x0/0x8c
[ 18.231190] [<ffffffff812bf1a0>] bus_for_each_dev+0x4a/0x79
[ 18.246322] [<ffffffff812bf753>] driver_attach+0x1c/0x1e
[ 18.246322] [<ffffffff812beaf2>] bus_add_driver+0xb5/0x207
[ 18.246322] [<ffffffff812bfca3>] driver_register+0x93/0x10a
[ 18.246322] [<ffffffffa0030000>] ? qla2x00_module_init+0x0/0x131
[qla2xxx]
[ 18.246322] [<ffffffff8123eb9e>] __pci_register_driver+0x63/0x9d
[ 18.246322] [<ffffffffa0030000>] ? qla2x00_module_init+0x0/0x131
[qla2xxx]
[ 18.246322] [<ffffffffa0030101>] qla2x00_module_init+0x101/0x131
[qla2xxx]
[ 18.246322] [<ffffffff81009058>] _stext+0x58/0x139
[ 18.246322] [<ffffffff81021eb2>] ? __send_IPI_dest_field+0x5c/0x64
[ 18.246322] [<ffffffff8101a652>] ? native_smp_send_reschedule+0x3b/0x3d
[ 18.246322] [<ffffffff8102d438>] ? smp_send_reschedule+0xa/0xc
[ 18.246322] [<ffffffff8102ee65>] ? resched_task+0x7b/0x7f
[ 18.246322] [<ffffffff8102f133>] ? task_rq_unlock+0xc/0xe
[ 18.246322] [<ffffffff81032b09>] ? try_to_wake_up+0x218/0x22a
[ 18.246322] [<ffffffff8105d8da>] sys_init_module+0x9f/0x1ad
[ 18.246322] [<ffffffff8100bf6b>] system_call_fastpath+0x16/0x1b
[ 18.246322] Code: ff e9 29 ff ff ff 90 90 55 48 89 fa 48 89 e5 8a 06 48
ff c6
88 02 48 ff c2 84 c0 75 f2 c9 48 89 f8 c3 55 48 89 f9 48 89 e5 eb 10 <8a>
06 3c
01 88 01 48 83 de ff 48 ff c1 48 ff ca 48 85 d2 75 eb
[ 18.246322] RIP [<ffffffff81230ce7>] strncpy+0x9/0x23
[ 18.246322] RSP <ffff88042bccd9f8>
[ 18.246322] CR2: 0000000000000000
[ 18.255936] ---[ end trace 2127ef5a187ff23f ]---
[ 18.257613] modprobe used greatest stack depth: 4128 bytes left
next reply other threads:[~2009-02-24 11:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-24 11:00 Gerald Nowitzky [this message]
[not found] <166d01c9966a$f0d6f990$0a00a8c0@ALDI2>
2009-02-24 15:49 ` QLA2xxx on Dell M600 Andrew Vasquez
-- strict thread matches above, loose matches on Subject: below --
2009-02-24 10:37 Gerald Nowitzky
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='169201c9966f$0fea9d60$0a00a8c0@ALDI2' \
--to=nowitzky@igne.de \
--cc=linux-driver@qlogic.com \
--cc=linux-scsi@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.