[U-Boot] [PATCH 1/3] nand: Clean up nand_util

["Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>]

This patch cleans up nand_util.c:
 - Fix tabs.
 - Fix typos.
 - Remove space character before opening parenthesis in function calls.
 - Fix comments.

Signed-off-by: Beno?t Th?baudeau <benoit.thebaudeau@advansee.com>
Cc: Scott Wood <scottwood@freescale.com>
---
 .../drivers/mtd/nand/nand_util.c                   |   64 ++++++++++----------
 1 file changed, 32 insertions(+), 32 deletions(-)

diff --git u-boot-nand-flash-9c60e75.orig/drivers/mtd/nand/nand_util.c u-boot-nand-flash-9c60e75/drivers/mtd/nand/nand_util.c
index c4752a7..3f11103 100644
--- u-boot-nand-flash-9c60e75.orig/drivers/mtd/nand/nand_util.c
+++ u-boot-nand-flash-9c60e75/drivers/mtd/nand/nand_util.c
@@ -50,8 +50,8 @@
 #include <nand.h>
 #include <jffs2/jffs2.h>
 
-typedef struct erase_info erase_info_t;
-typedef struct mtd_info	  mtd_info_t;
+typedef struct erase_info	erase_info_t;
+typedef struct mtd_info		mtd_info_t;
 
 /* support only for native endian JFFS2 */
 #define cpu_to_je16(x) (x)
@@ -59,7 +59,7 @@ typedef struct mtd_info	  mtd_info_t;
 
 /**
  * nand_erase_opts: - erase NAND flash with support for various options
- *		      (jffs2 formating)
+ *		      (jffs2 formatting)
  *
  * @param meminfo	NAND device to erase
  * @param opts		options,  @see struct nand_erase_options
@@ -81,7 +81,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 	struct nand_chip *chip = meminfo->priv;
 
 	if ((opts->offset & (meminfo->writesize - 1)) != 0) {
-		printf("Attempt to erase non page aligned data\n");
+		printf("Attempt to erase non page-aligned data\n");
 		return -1;
 	}
 
@@ -94,8 +94,8 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 	erase_length = lldiv(opts->length + meminfo->erasesize - 1,
 			     meminfo->erasesize);
 
-	cleanmarker.magic = cpu_to_je16 (JFFS2_MAGIC_BITMASK);
-	cleanmarker.nodetype = cpu_to_je16 (JFFS2_NODETYPE_CLEANMARKER);
+	cleanmarker.magic = cpu_to_je16(JFFS2_MAGIC_BITMASK);
+	cleanmarker.nodetype = cpu_to_je16(JFFS2_NODETYPE_CLEANMARKER);
 	cleanmarker.totlen = cpu_to_je32(8);
 
 	/* scrub option allows to erase badblock. To prevent internal
@@ -118,7 +118,7 @@ int nand_erase_opts(nand_info_t *meminfo, const nand_erase_options_t *opts)
 	     erased_length < erase_length;
 	     erase.addr += meminfo->erasesize) {
 
-		WATCHDOG_RESET ();
+		WATCHDOG_RESET();
 
 		if (!opts->scrub && bbtest) {
 			int ret = meminfo->block_isbad(meminfo, erase.addr);
@@ -259,7 +259,7 @@ int nand_lock(struct mtd_info *mtd, int tight)
  *			   flash
  *
  * @param mtd		nand mtd instance
- * @param offset	page address to query (muss be page aligned!)
+ * @param offset	page address to query (must be page-aligned!)
  *
  * @return		-1 in case of error
  *			>0 lock status:
@@ -281,7 +281,7 @@ int nand_get_lock_status(struct mtd_info *mtd, loff_t offset)
 
 
 	if ((offset & (mtd->writesize - 1)) != 0) {
-		printf ("nand_get_lock_status: "
+		printf("nand_get_lock_status: "
 			"Start address must be beginning of "
 			"nand page!\n");
 		ret = -1;
@@ -332,20 +332,20 @@ int nand_unlock(struct mtd_info *mtd, loff_t start, size_t length,
 	/* check the WP bit */
 	chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
 	if (!(chip->read_byte(mtd) & NAND_STATUS_WP)) {
-		printf ("nand_unlock: Device is write protected!\n");
+		printf("nand_unlock: Device is write protected!\n");
 		ret = -1;
 		goto out;
 	}
 
 	if ((start & (mtd->erasesize - 1)) != 0) {
-		printf ("nand_unlock: Start address must be beginning of "
+		printf("nand_unlock: Start address must be beginning of "
 			"nand block!\n");
 		ret = -1;
 		goto out;
 	}
 
 	if (length == 0 || (length & (mtd->erasesize - 1)) != 0) {
-		printf ("nand_unlock: Length must be a multiple of nand block "
+		printf("nand_unlock: Length must be a multiple of nand block "
 			"size %08x!\n", mtd->erasesize);
 		ret = -1;
 		goto out;
@@ -485,7 +485,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		pages = nand->erasesize / nand->writesize;
 		blocksize = (pages * nand->oobsize) + nand->erasesize;
 		if (*length % (nand->writesize + nand->oobsize)) {
-			printf ("Attempt to write incomplete page"
+			printf("Attempt to write incomplete page"
 				" in yaffs mode\n");
 			return -EINVAL;
 		}
@@ -507,25 +507,25 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 	 * partition boundary).  So don't try to handle that.
 	 */
 	if ((offset & (nand->writesize - 1)) != 0) {
-		printf ("Attempt to write non page aligned data\n");
+		printf("Attempt to write non page-aligned data\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	need_skip = check_skip_len(nand, offset, *length);
 	if (need_skip < 0) {
-		printf ("Attempt to write outside the flash area\n");
+		printf("Attempt to write outside the flash area\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	if (!need_skip && !(flags & WITH_DROP_FFS)) {
-		rval = nand_write (nand, offset, length, buffer);
+		rval = nand_write(nand, offset, length, buffer);
 		if (rval == 0)
 			return 0;
 
 		*length = 0;
-		printf ("NAND write to offset %llx failed %d\n",
+		printf("NAND write to offset %llx failed %d\n",
 			offset, rval);
 		return rval;
 	}
@@ -534,10 +534,10 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		size_t block_offset = offset & (nand->erasesize - 1);
 		size_t write_size, truncated_write_size;
 
-		WATCHDOG_RESET ();
+		WATCHDOG_RESET();
 
-		if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
-			printf ("Skip bad block 0x%08llx\n",
+		if (nand_block_isbad(nand, offset & ~(nand->erasesize - 1))) {
+			printf("Skip bad block 0x%08llx\n",
 				offset & ~(nand->erasesize - 1));
 			offset += nand->erasesize - block_offset;
 			continue;
@@ -592,7 +592,7 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		}
 
 		if (rval != 0) {
-			printf ("NAND write to offset %llx failed %d\n",
+			printf("NAND write to offset %llx failed %d\n",
 				offset, rval);
 			*length -= left_to_write;
 			return rval;
@@ -608,13 +608,13 @@ int nand_write_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
  * nand_read_skip_bad:
  *
  * Read image from NAND flash.
- * Blocks that are marked bad are skipped and the next block is readen
+ * Blocks that are marked bad are skipped and the next block is read
  * instead as long as the image is short enough to fit even after skipping the
  * bad blocks.
  *
  * @param nand NAND device
  * @param offset offset in flash
- * @param length buffer length, on return holds remaining bytes to read
+ * @param length buffer length, on return holds number of read bytes
  * @param buffer buffer to write to
  * @return 0 in case of success
  */
@@ -627,25 +627,25 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 	int need_skip;
 
 	if ((offset & (nand->writesize - 1)) != 0) {
-		printf ("Attempt to read non page aligned data\n");
+		printf("Attempt to read non page-aligned data\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	need_skip = check_skip_len(nand, offset, *length);
 	if (need_skip < 0) {
-		printf ("Attempt to read outside the flash area\n");
+		printf("Attempt to read outside the flash area\n");
 		*length = 0;
 		return -EINVAL;
 	}
 
 	if (!need_skip) {
-		rval = nand_read (nand, offset, length, buffer);
+		rval = nand_read(nand, offset, length, buffer);
 		if (!rval || rval == -EUCLEAN)
 			return 0;
 
 		*length = 0;
-		printf ("NAND read from offset %llx failed %d\n",
+		printf("NAND read from offset %llx failed %d\n",
 			offset, rval);
 		return rval;
 	}
@@ -654,10 +654,10 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		size_t block_offset = offset & (nand->erasesize - 1);
 		size_t read_length;
 
-		WATCHDOG_RESET ();
+		WATCHDOG_RESET();
 
-		if (nand_block_isbad (nand, offset & ~(nand->erasesize - 1))) {
-			printf ("Skipping bad block 0x%08llx\n",
+		if (nand_block_isbad(nand, offset & ~(nand->erasesize - 1))) {
+			printf("Skipping bad block 0x%08llx\n",
 				offset & ~(nand->erasesize - 1));
 			offset += nand->erasesize - block_offset;
 			continue;
@@ -668,9 +668,9 @@ int nand_read_skip_bad(nand_info_t *nand, loff_t offset, size_t *length,
 		else
 			read_length = nand->erasesize - block_offset;
 
-		rval = nand_read (nand, offset, &read_length, p_buffer);
+		rval = nand_read(nand, offset, &read_length, p_buffer);
 		if (rval && rval != -EUCLEAN) {
-			printf ("NAND read from offset %llx failed %d\n",
+			printf("NAND read from offset %llx failed %d\n",
 				offset, rval);
 			*length -= left_to_read;
 			return rval;