Patchwork housekeeping for: spi-devel-general

[patchwork-bot+spi-devel-general@kernel.org]

Latest series: [v4] fsi: Add interrupt support (2024-06-05T21:22:36)
  Superseding: [v3] fsi: Add interrupt support (2024-05-16T18:18:36):
    [v3,01/40] fsi: hub: Set master index to link number plus one
    [v3,02/40] fsi: Move slave definitions to fsi-slave.h
    [v3,03/40] fsi: Fix slave addressing after break command
    [v3,04/40] fsi: Use a defined value for default echo delay
    [v3,05/40] fsi: Calculate local bus clock frequency
    [v3,06/40] fsi: core: Improve master read/write/error traces
    [v3,07/40] fsi: core: Add slave error trace
    [v3,08/40] fsi: core: Reset errors instead of clearing interrupts
    [v3,09/40] fsi: aspeed: Add AST2700 support
    [v3,10/40] fsi: core: Add slave spinlock
    [v3,11/40] fsi: core: Allow cfam device type aliases
    [v3,12/40] fsi: core: Add common regmap master functions
    [v3,13/40] fsi: core: Disable relative addressing during scan
    [v3,14/40] fsi: hub: Use common initialization and link enable
    [v3,15/40] fsi: aspeed: Use common initialization and link enable
    [v3,16/40] fsi: aspeed: Remove cfam reset sysfs file in error path and remove
    [v3,17/40] fsi: aspeed: Refactor trace functions
    [v3,18/40] fsi: aspeed: Don't clear all IRQs during OPB transfers
    [v3,19/40] fsi: aspeed: Only read result register for successful read
    [v3,20/40] fsi: aspeed: Switch to spinlock
    [v3,21/40] fsi: aspeed: Disable relative addressing and IPOLL for cfam reset
    [v3,22/40] fsi: aspeed: Use common master error handler
    [v3,23/40] fsi: core: Add interrupt support
    [v3,24/40] fsi: aspeed: Add interrupt support
    [v3,25/40] fsi: hub: Add interrupt support
    [v3,26/40] i2c: fsi: Calculate clock divider from local bus frequency
    [v3,27/40] i2c: fsi: Improve formatting
    [v3,28/40] i2c: fsi: Change fsi_i2c_write_reg to accept data instead of a pointer
    [v3,29/40] i2c: fsi: Remove list structure of ports
    [v3,30/40] i2c: fsi: Define a function to check status error bits
    [v3,31/40] i2c: fsi: Add boolean for skip stop command on abort
    [v3,32/40] i2c: fsi: Add interrupt support
    [v3,33/40] fsi: hub master: Reset hub master after errors
    [v3,34/40] fsi: core: Add master register read-only sysfs
    [v3,35/40] fsi: core: Add slave register read-only sysfs
    [v3,36/40] fsi: i2cr: Adjust virtual CFAM ID to match Odyssey chip
    [v3,37/40] fsi: core: Add different types of CFAM
    [v3,38/40] spi: fsi: Calculate clock divider from local bus frequency
    [v3,39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency
    [v3,40/40] ARM: dts: aspeed: P10: Bump SPI max frequencies


-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html