Re: [PATCH v3 6/9] dt-bindings: interrupt-controller: realtek,rtl-intc: Add rtl9300-intc

["Rob Herring (Arm)" <robh@kernel.org>]

On Thu, 27 Jun 2024 16:33:14 +1200, Chris Packham wrote:
> Add a compatible string for the interrupt controller found on the
> rtl930x SoCs. The interrupt controller has registers for VPE1 so these
> are added as a second reg cell.
> 
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> 
> Notes:
>     Changes in v3:
>     - Use items to describe the regs property
>     Changes in v2:
>     - Set reg:maxItems to 2 to allow for VPE1 registers on the rtl9300. Add
>       a condition to enforce the old limit on other SoCs.
>     - Connor and Krzysztof offered acks on v1 but I think the changes here
>       are big enough to void those.
> 
>  .../interrupt-controller/realtek,rtl-intc.yaml | 18 +++++++++++++++++-
>  1 file changed, 17 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.example.dtb: interrupt-controller@3000: reg: [[12288, 24]] is too short
	from schema $id: http://devicetree.org/schemas/interrupt-controller/realtek,rtl-intc.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20240627043317.3751996-7-chris.packham@alliedtelesis.co.nz

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.