Re: [B.A.T.M.A.N.] Batman-adv + lxc

[Christof Schulze <christof.schulze@gmx.net>]

[-- Attachment #1: Type: text/plain, Size: 1610 bytes --]

Hi,

I only saw your replies in the mailing archives, I probably was not
signed up to the list correctly when you answered. The issue is resolved
now but that is why I am breaking my own thread.

> what about bridging the real interface that you want to use for the mesh
> in the container and then load batman-adv inside LXC ?
this is in fact what I tried first. But bridiging the interface causes
the batman-adv information in /sys/class/net to get lost. Maybe because
I have to do things in a different order or because veth is really not
the right interface type.

> > I started by loading batman-adv on the host and bridging it into the
> > container. After adding the interfaces inside the container where
> > meshing should happen I cannot add a gateway because batctl
> > complains that /sys/class/net/bat0/mesh does not exist. Indeed, in
> > the container it does not exist.
> > 
> > How can batman-adv be used from an lxc-container?

> What I usually did was configuring batman-adv properly on the host via
> batctl. And only in the end adding it to the lxc-container.  That
> seemed to work for me (except the reboot crash noted above).
what do you mean by "adding it to the lxc container"?  I tried bridging
the bat0 interface into the container as a separate nic. That did not
yield positive results.

Unfortunately if I risk crashing the host, this option is not viable for
me yet as I cannot simply restart the machine once it crashed.

Christof

-- 
()  ascii ribbon campaign - against html e-mail
/\  www.asciiribbon.org   - against proprietary attachments

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]