From: Paul Eggleton <paul.eggleton@linux.intel.com>
To: openembedded-devel@lists.openembedded.org
Subject: Re: [PATCH 0/4] Qt4 qmake & other fixes
Date: Sun, 26 Feb 2012 22:27:36 +0000 [thread overview]
Message-ID: <1736277.jpdVZfPqMM@helios> (raw)
In-Reply-To: <cover.1330294151.git.paul.eggleton@linux.intel.com>
oops, wrong list... sorry for the noise, will resend.
Cheers,
Paul
On Sunday 26 February 2012 22:17:57 Paul Eggleton wrote:
> This patchset enables building qmake for the target with other target
> utilities. I also fixed a couple of build failures in the process.
>
> In addition I've used the same method to build qmake in the
> qt4-tools-nativesdk recipe. This wasn't strictly necessary, however I
> think it would be good to be consistent and incidentally the resulting
> qmake executable is slightly smaller.
>
> Since the RFC version, a few issues were fixed:
> * Ensure the qmake changes work when the platform is different e.g.
> linux-gnueabi-oe-g++ instead of linux-oe-g++
> * Install an appropriate environment setup script adapted from the
> former separate qmake2 recipe
> * Fix the gcc 4.6 error by fixing the root cause (inability to correctly
> detect the C++ compiler as g++) rather than hacking around it.
> * Format some of the patches so they can be used with git am
>
> Thanks to Philip Balister for helping me test the qmake improvements.
>
>
> The following changes since commit 30253358f5e76fb7b25be27198b4c125e0dbdf2c:
>
> Quoting fixes (2012-02-26 12:50:36 +0000)
>
> are available in the git repository at:
> git://git.openembedded.org/openembedded-core-contrib paule/qmake-target
>
> http://cgit.openembedded.org/cgit.cgi/openembedded-core-contrib/log/?h=paul
> e/qmake-target
>
> Paul Eggleton (4):
> qt4: fix compile error in Qt 4.8.0 with gcc 4.6
> qt4: build qmake for the target
> qt4-tools-nativesdk: fix build of 4.7.4
> qt4-tools-nativesdk: improve and tidy up qmake build
>
> meta/recipes-qt/qt4/files/qmake-exists-check.patch | 19 -------
> meta/recipes-qt/qt4/files/target_qmake.patch | 16 ++++++
> meta/recipes-qt/qt4/qt-4.7.4.inc | 11 +----
> meta/recipes-qt/qt4/qt-4.8.0.inc | 13 +----
> .../qt4/qt-4.8.0/configure_oe_compiler.patch | 31 ++++++++++++
> meta/recipes-qt/qt4/qt-4.8.0/qmake_pri_fixes.patch | 51
> ++++++++++++++++++++ meta/recipes-qt/qt4/qt4-embedded_4.7.4.bb |
> 2 +-
> meta/recipes-qt/qt4/qt4-embedded_4.8.0.bb | 2 +-
> meta/recipes-qt/qt4/qt4-tools-nativesdk.inc | 29 +++++++----
> meta/recipes-qt/qt4/qt4-tools-nativesdk_4.8.0.bb | 2 +
> meta/recipes-qt/qt4/qt4-x11-free_4.7.4.bb | 2 +-
> meta/recipes-qt/qt4/qt4.inc | 47
> ++++++++++++++++-- 12 files changed, 168 insertions(+), 57 deletions(-)
> delete mode 100644 meta/recipes-qt/qt4/files/qmake-exists-check.patch
> create mode 100644 meta/recipes-qt/qt4/files/target_qmake.patch
> create mode 100644 meta/recipes-qt/qt4/qt-4.8.0/configure_oe_compiler.patch
> create mode 100644 meta/recipes-qt/qt4/qt-4.8.0/qmake_pri_fixes.patch
--
Paul Eggleton
Intel Open Source Technology Centre
prev parent reply other threads:[~2012-02-26 22:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-26 22:17 [PATCH 0/4] Qt4 qmake & other fixes Paul Eggleton
2012-02-26 22:27 ` Paul Eggleton
2012-02-26 22:17 ` [PATCH 1/4] qt4: fix compile error in Qt 4.8.0 with gcc 4.6 Paul Eggleton
2012-02-26 22:27 ` Paul Eggleton
2012-02-26 22:55 ` Koen Kooi
2012-02-26 22:59 ` Paul Eggleton
2012-02-26 23:05 ` Koen Kooi
2012-02-27 0:32 ` Paul Eggleton
2012-02-26 22:17 ` [PATCH 2/4] qt4: build qmake for the target Paul Eggleton
2012-02-26 22:27 ` Paul Eggleton
2012-02-26 22:18 ` [PATCH 3/4] qt4-tools-nativesdk: fix build of 4.7.4 Paul Eggleton
2012-02-26 22:27 ` Paul Eggleton
2012-02-26 22:18 ` [PATCH 4/4] qt4-tools-nativesdk: improve and tidy up qmake build Paul Eggleton
2012-02-26 22:27 ` Paul Eggleton
2012-02-26 22:27 ` Paul Eggleton [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1736277.jpdVZfPqMM@helios \
--to=paul.eggleton@linux.intel.com \
--cc=openembedded-devel@lists.openembedded.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.