From: Tariq Toukan <tariqt@nvidia.com>
To: "David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
Eric Dumazet <edumazet@google.com>,
"Andrew Lunn" <andrew+netdev@lunn.ch>
Cc: Gal Pressman <gal@nvidia.com>,
Leon Romanovsky <leonro@nvidia.com>,
"Yael Chemla" <ychemla@nvidia.com>,
Saeed Mahameed <saeedm@nvidia.com>,
"Leon Romanovsky" <leon@kernel.org>,
Tariq Toukan <tariqt@nvidia.com>,
"Jonathan Corbet" <corbet@lwn.net>, <netdev@vger.kernel.org>,
<linux-rdma@vger.kernel.org>, <linux-doc@vger.kernel.org>,
<linux-kernel@vger.kernel.org>,
Kalesh Anakkur Purayil <kalesh-anakkur.purayil@broadcom.com>,
Jacob Keller <jacob.e.keller@intel.com>,
Stanislav Fomichev <stfomichev@gmail.com>
Subject: [PATCH net-next V2 4/4] net/mlx5e: Expose port reset cycle recovery counter via ethtool
Date: Sun, 16 Mar 2025 10:14:36 +0200 [thread overview]
Message-ID: <1742112876-2890-5-git-send-email-tariqt@nvidia.com> (raw)
In-Reply-To: <1742112876-2890-1-git-send-email-tariqt@nvidia.com>
From: Yael Chemla <ychemla@nvidia.com>
Display recovery event of PPCNT recovery counters group. Counts (per
link) the number of total successful recovery events of any recovery
types during port reset cycle.
Signed-off-by: Yael Chemla <ychemla@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
---
.../ethernet/mellanox/mlx5/counters.rst | 5 +++
.../ethernet/mellanox/mlx5/core/en_stats.c | 44 ++++++++++++++++---
.../ethernet/mellanox/mlx5/core/en_stats.h | 4 ++
3 files changed, 48 insertions(+), 5 deletions(-)
diff --git a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst
index 99d95be4d159..43d72c8b713b 100644
--- a/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst
+++ b/Documentation/networking/device_drivers/ethernet/mellanox/mlx5/counters.rst
@@ -1082,6 +1082,11 @@ like flow control, FEC and more.
need to replace the cable/transceiver.
- Error
+ * - `total_success_recovery_phy`
+ - The number of total successful recovery events of any type during
+ ports reset cycle.
+ - Error
+
* - `rx_out_of_buffer`
- Number of times receive queue had no software buffers allocated for the
adapter's incoming traffic.
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c
index a417962acfa9..acb00fd7efa4 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.c
@@ -1250,12 +1250,22 @@ pport_phy_statistical_err_lanes_stats_desc[] = {
{ "rx_err_lane_3_phy", PPORT_PHY_STATISTICAL_OFF(phy_corrected_bits_lane3) },
};
+#define PPORT_PHY_RECOVERY_OFF(c) \
+ MLX5_BYTE_OFF(ppcnt_reg, counter_set.phys_layer_recovery_cntrs.c)
+static const struct counter_desc
+pport_phy_recovery_cntrs_stats_desc[] = {
+ { "total_success_recovery_phy",
+ PPORT_PHY_RECOVERY_OFF(total_successful_recovery_events) }
+};
+
#define NUM_PPORT_PHY_LAYER_COUNTERS \
ARRAY_SIZE(pport_phy_layer_cntrs_stats_desc)
#define NUM_PPORT_PHY_STATISTICAL_COUNTERS \
ARRAY_SIZE(pport_phy_statistical_stats_desc)
#define NUM_PPORT_PHY_STATISTICAL_PER_LANE_COUNTERS \
ARRAY_SIZE(pport_phy_statistical_err_lanes_stats_desc)
+#define NUM_PPORT_PHY_RECOVERY_COUNTERS \
+ ARRAY_SIZE(pport_phy_recovery_cntrs_stats_desc)
#define NUM_PPORT_PHY_STATISTICAL_LOOPBACK_COUNTERS(dev) \
(MLX5_CAP_PCAM_FEATURE(dev, ppcnt_statistical_group) ? \
@@ -1263,6 +1273,9 @@ pport_phy_statistical_err_lanes_stats_desc[] = {
#define NUM_PPORT_PHY_STATISTICAL_PER_LANE_LOOPBACK_COUNTERS(dev) \
(MLX5_CAP_PCAM_FEATURE(dev, per_lane_error_counters) ? \
NUM_PPORT_PHY_STATISTICAL_PER_LANE_COUNTERS : 0)
+#define NUM_PPORT_PHY_RECOVERY_LOOPBACK_COUNTERS(dev) \
+ (MLX5_CAP_PCAM_FEATURE(dev, ppcnt_recovery_counters) ? \
+ NUM_PPORT_PHY_RECOVERY_COUNTERS : 0)
static MLX5E_DECLARE_STATS_GRP_OP_NUM_STATS(phy)
{
@@ -1275,6 +1288,7 @@ static MLX5E_DECLARE_STATS_GRP_OP_NUM_STATS(phy)
num_stats += NUM_PPORT_PHY_STATISTICAL_PER_LANE_LOOPBACK_COUNTERS(mdev);
+ num_stats += NUM_PPORT_PHY_RECOVERY_LOOPBACK_COUNTERS(mdev);
return num_stats;
}
@@ -1295,6 +1309,10 @@ static MLX5E_DECLARE_STATS_GRP_OP_FILL_STRS(phy)
ethtool_puts(data,
pport_phy_statistical_err_lanes_stats_desc[i]
.format);
+
+ for (i = 0; i < NUM_PPORT_PHY_RECOVERY_LOOPBACK_COUNTERS(mdev); i++)
+ ethtool_puts(data,
+ pport_phy_recovery_cntrs_stats_desc[i].format);
}
static MLX5E_DECLARE_STATS_GRP_OP_FILL_STATS(phy)
@@ -1324,6 +1342,13 @@ static MLX5E_DECLARE_STATS_GRP_OP_FILL_STATS(phy)
MLX5E_READ_CTR64_BE(
&priv->stats.pport.phy_statistical_counters,
pport_phy_statistical_err_lanes_stats_desc, i));
+
+ for (i = 0; i < NUM_PPORT_PHY_RECOVERY_LOOPBACK_COUNTERS(mdev); i++)
+ mlx5e_ethtool_put_stat(
+ data,
+ MLX5E_READ_CTR32_BE(
+ &priv->stats.pport.phy_recovery_counters,
+ pport_phy_recovery_cntrs_stats_desc, i));
}
static MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(phy)
@@ -1339,12 +1364,21 @@ static MLX5E_DECLARE_STATS_GRP_OP_UPDATE_STATS(phy)
MLX5_SET(ppcnt_reg, in, grp, MLX5_PHYSICAL_LAYER_COUNTERS_GROUP);
mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPCNT, 0, 0);
- if (!MLX5_CAP_PCAM_FEATURE(mdev, ppcnt_statistical_group))
- return;
+ if (MLX5_CAP_PCAM_FEATURE(mdev, ppcnt_statistical_group)) {
+ out = pstats->phy_statistical_counters;
+ MLX5_SET(ppcnt_reg, in, grp,
+ MLX5_PHYSICAL_LAYER_STATISTICAL_GROUP);
+ mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPCNT, 0,
+ 0);
+ }
- out = pstats->phy_statistical_counters;
- MLX5_SET(ppcnt_reg, in, grp, MLX5_PHYSICAL_LAYER_STATISTICAL_GROUP);
- mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPCNT, 0, 0);
+ if (MLX5_CAP_PCAM_FEATURE(mdev, ppcnt_recovery_counters)) {
+ out = pstats->phy_recovery_counters;
+ MLX5_SET(ppcnt_reg, in, grp,
+ MLX5_PHYSICAL_LAYER_RECOVERY_GROUP);
+ mlx5_core_access_reg(mdev, in, sz, out, sz, MLX5_REG_PPCNT, 0,
+ 0);
+ }
}
void mlx5e_get_link_ext_stats(struct net_device *dev,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
index 5961c569cfe0..0d87947e348d 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_stats.h
@@ -309,6 +309,9 @@ struct mlx5e_vport_stats {
#define PPORT_PHY_STATISTICAL_GET(pstats, c) \
MLX5_GET64(ppcnt_reg, (pstats)->phy_statistical_counters, \
counter_set.phys_layer_statistical_cntrs.c##_high)
+#define PPORT_PHY_RECOVERY_GET(pstats, c) \
+ MLX5_GET64(ppcnt_reg, (pstats)->phy_recovery_counters, \
+ counter_set.phys_layer_recovery_cntrs.c)
#define PPORT_PER_PRIO_GET(pstats, prio, c) \
MLX5_GET64(ppcnt_reg, pstats->per_prio_counters[prio], \
counter_set.eth_per_prio_grp_data_layout.c##_high)
@@ -324,6 +327,7 @@ struct mlx5e_pport_stats {
__be64 per_prio_counters[NUM_PPORT_PRIO][MLX5_ST_SZ_QW(ppcnt_reg)];
__be64 phy_counters[MLX5_ST_SZ_QW(ppcnt_reg)];
__be64 phy_statistical_counters[MLX5_ST_SZ_QW(ppcnt_reg)];
+ __be64 phy_recovery_counters[MLX5_ST_SZ_QW(ppcnt_reg)];
__be64 eth_ext_counters[MLX5_ST_SZ_QW(ppcnt_reg)];
__be64 per_tc_prio_counters[NUM_PPORT_PRIO][MLX5_ST_SZ_QW(ppcnt_reg)];
__be64 per_tc_congest_prio_counters[NUM_PPORT_PRIO][MLX5_ST_SZ_QW(ppcnt_reg)];
--
2.31.1
next prev parent reply other threads:[~2025-03-16 8:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-03-16 8:14 [PATCH net-next V2 0/4] mlx5e: Support recovery counter in reset Tariq Toukan
2025-03-16 8:14 ` [PATCH net-next V2 1/4] net/mlx5e: Ensure each counter group uses its PCAM bit Tariq Toukan
2025-03-16 8:14 ` [PATCH net-next V2 2/4] net/mlx5e: Access PHY layer counter group as other counter groups Tariq Toukan
2025-03-16 8:14 ` [PATCH net-next V2 3/4] net/mlx5e: Get counter group size by FW capability Tariq Toukan
2025-03-16 8:14 ` Tariq Toukan [this message]
2025-03-21 20:30 ` [PATCH net-next V2 0/4] mlx5e: Support recovery counter in reset patchwork-bot+netdevbpf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1742112876-2890-5-git-send-email-tariqt@nvidia.com \
--to=tariqt@nvidia.com \
--cc=andrew+netdev@lunn.ch \
--cc=corbet@lwn.net \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=gal@nvidia.com \
--cc=jacob.e.keller@intel.com \
--cc=kalesh-anakkur.purayil@broadcom.com \
--cc=kuba@kernel.org \
--cc=leon@kernel.org \
--cc=leonro@nvidia.com \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rdma@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=pabeni@redhat.com \
--cc=saeedm@nvidia.com \
--cc=stfomichev@gmail.com \
--cc=ychemla@nvidia.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.