From: patchwork-bot+bluetooth@kernel.org
To: Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH BlueZ v1] iso-tester: Add ISO Reconnect Send and Receive #16
Date: Mon, 11 Aug 2025 12:50:07 +0000 [thread overview]
Message-ID: <175491660749.1660461.8669727348218651918.git-patchwork-notify@kernel.org> (raw)
In-Reply-To: <20250808191053.648211-1-luiz.dentz@gmail.com>
Hello:
This patch was applied to bluetooth/bluez.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:
On Fri, 8 Aug 2025 15:10:53 -0400 you wrote:
> From: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
>
> This adds ISO Reconnect Send and Receive #16 which test reconnecting,
> send/receive datas, 16 times to stress test the handling of reconnecting
> logic and confirm tha POLLOUT is generated everytime:
>
> ISO Reconnect Send and Receive #16 - Success - run
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #16...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #15...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #14...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #13...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #12...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #11...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #10...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #9...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #8...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #7...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #6...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #5...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #4...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #3...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #2...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> Reconnecting #1...
> Connecting to 00:AA:01:01:00:00...
> Connect 0 in progress
> Accept client connection with handle 0x0101: 0x00
> New client connection with handle 0x0101
> Successfully connected
> POLLOUT event received
> Writing 40 bytes of data
> Receive 40 bytes of data
> Client received 40 bytes of data
> Disconnecting...
> ISO handle 0x0101 disconnected
> Successfully disconnected
> ISO Reconnect Send and Receive #16 - Success - test passed
>
> [...]
Here is the summary with links:
- [BlueZ,v1] iso-tester: Add ISO Reconnect Send and Receive #16
https://git.kernel.org/pub/scm/bluetooth/bluez.git/?id=10977abda3f8
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
prev parent reply other threads:[~2025-08-11 12:49 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-08-08 19:10 [PATCH BlueZ v1] iso-tester: Add ISO Reconnect Send and Receive #16 Luiz Augusto von Dentz
2025-08-08 20:44 ` [BlueZ,v1] " bluez.test.bot
2025-08-11 12:50 ` patchwork-bot+bluetooth [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=175491660749.1660461.8669727348218651918.git-patchwork-notify@kernel.org \
--to=patchwork-bot+bluetooth@kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.