From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Igor Kugasyan <kugasyan@hotmail.com>
Cc: "todd.fischer@ridgerun.com" <todd.fischer@ridgerun.com>,
"clark.becker@ridgerun.com" <clark.becker@ridgerun.com>,
"linux-media@vger.kernel.org" <linux-media@vger.kernel.org>,
"g.liakhovetski@gmx.de" <g.liakhovetski@gmx.de>
Subject: Re: mt9v034 driver
Date: Sun, 28 Apr 2013 23:08:38 +0200 [thread overview]
Message-ID: <1762550.7mDg3VrWU9@avalon> (raw)
In-Reply-To: <DUB112-W1120C7E0BD196DF8764BA21D2B70@phx.gbl>
Hi Igor,
On Friday 26 April 2013 16:30:49 Igor Kugasyan wrote:
> Dear Sirs,
>
> I wrote a driver for the mt9v034 as Todd recommended (on basis of working
> mt9p031 and mt9v022), built kernel with this driver,
Note that a driver for the same sensor has already been posted, see
https://patchwork.linuxtv.org/patch/14907/.
> but faced with the
> problem:
> /dev # cat video0
> cat: can't open 'video0': No such device
>
> ----------------------------------------------------------------------------
> NAND
> Starting NAND Copy...
> Valid magicnum, 0xA1ACED66, found in block 0x00000019.
>
>
> U-Boot 2010.12-rc2 (Feb 07 2013 - 18:15:34)
>
> Cores: ARM 297 MHz
> DDR: 243 MHz
> I2C: ready
> DRAM: 128 MiB
> NAND: 256 MiB
> MMC: davinci: 0, davinci: 1
> Net: Ethernet PHY: GENERIC @ 0x00
> DaVinci-EMAC
> Hit any key to stop autoboot: 0
>
> Loading from nand0, offset 0x400000
> Image Name: "RR Linux Kernel"
> Created: 2013-04-26 11:03:27 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 4247104 Bytes = 4.1 MiB
> Load Address: 80008000
> Entry Point: 80008000
> Automatic boot of image at addr 0x82000000 ...
> ## Booting kernel from Legacy Image at 82000000 ...
> Image Name: "RR Linux Kernel"
> Created: 2013-04-26 11:03:27 UTC
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 4247104 Bytes = 4.1 MiB
> Load Address: 80008000
> Entry Point: 80008000
> Verifying Checksum ... OK
> Loading Kernel Image ... OK
> OK
>
> Starting kernel ...
>
> Linux version 2.6.32.17-davinci1 (root@ubuntu) (gcc version 4.3.3 (Sourcery
> G++ Lite 2009q1-203) ) #129 PREEMPT Fri Apr 26 14:02:08 EEST 2013
Not only is 2.6.32 from ancient times, I suppose it's the kernel provided with
the TI BSP. I don't think you will get any support for that here, you should
contact your TI support channel. We can only provide support for the mainline
kernel.
--
Regards,
Laurent Pinchart
next parent reply other threads:[~2013-04-28 21:08 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <DUB112-W1120C7E0BD196DF8764BA21D2B70@phx.gbl>
2013-04-28 21:08 ` Laurent Pinchart [this message]
[not found] <DUB112-W5AD3C17EE426206DFAEF9D2CE0@phx.gbl>
2013-04-17 14:15 ` mt9v034 driver Guennadi Liakhovetski
2013-04-18 14:05 ` Laurent Pinchart
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1762550.7mDg3VrWU9@avalon \
--to=laurent.pinchart@ideasonboard.com \
--cc=clark.becker@ridgerun.com \
--cc=g.liakhovetski@gmx.de \
--cc=kugasyan@hotmail.com \
--cc=linux-media@vger.kernel.org \
--cc=todd.fischer@ridgerun.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.