From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from galahad.ideasonboard.com ([185.26.127.97]:53211 "EHLO galahad.ideasonboard.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S964935AbdIYU7T (ORCPT ); Mon, 25 Sep 2017 16:59:19 -0400 From: Laurent Pinchart To: kieran.bingham@ideasonboard.com Cc: Laurent Pinchart , linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org Subject: Re: [PATCH] v4l: vsp1: Start and stop DRM pipeline independently of planes Date: Mon, 25 Sep 2017 23:59:07 +0300 Message-ID: <17726601.dARtd6loas@avalon> In-Reply-To: <5b2b812b-f0ba-257b-ac71-13f21d0635ec@ideasonboard.com> References: <20170815225744.14730-1-laurent.pinchart+renesas@ideasonboard.com> <5b2b812b-f0ba-257b-ac71-13f21d0635ec@ideasonboard.com> MIME-Version: 1.0 Content-Transfer-Encoding: 7Bit Content-Type: text/plain; charset="us-ascii" Sender: linux-renesas-soc-owner@vger.kernel.org List-ID: Hi Kieran, On Monday, 25 September 2017 20:25:14 EEST Kieran Bingham wrote: > On 15/08/17 23:57, Laurent Pinchart wrote: > > The KMS API supports enabling a CRTC without any plane. To enable that > > use case, we need to start the pipeline when configuring the LIF, > > instead of when enabling the first plane. > > Tested and verified on Salvator-X ES1.0 using the KMS Test suite, including > suspend/resume, in combination with the "[PATCH 0/3] R-Car DU: Clip planes > to screen boundaries" series. > > Tested-by: Kieran Bingham > > > Signed-off-by: Laurent Pinchart > > > > Reviewed-by: Kieran Bingham > > > --- > > > > drivers/media/platform/vsp1/vsp1_drm.c | 37 ++++++++++++++++++++--------- > > 1 file changed, 27 insertions(+), 10 deletions(-) > > > > This patch is based on top of the VSP+DU large patch series queued through > > Dave's DRM tree for v4.14-rc1. It doesn't can't be merged independently > > through the linux-media tree for the same kernel version. As the change is > > not urgent, it can be delayed until v4.15-rc1. > > > > diff --git a/drivers/media/platform/vsp1/vsp1_drm.c > > b/drivers/media/platform/vsp1/vsp1_drm.c index 4dfbeac8f42c..7ce69f23f50a > > 100644 > > --- a/drivers/media/platform/vsp1/vsp1_drm.c > > +++ b/drivers/media/platform/vsp1/vsp1_drm.c > > @@ -84,8 +84,12 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int > > pipe_index,> > > struct vsp1_drm_pipeline *drm_pipe; > > struct vsp1_pipeline *pipe; > > struct vsp1_bru *bru; > > > > + struct vsp1_entity *entity; > > + struct vsp1_entity *next; > > + struct vsp1_dl_list *dl; > > > > struct v4l2_subdev_format format; > > const char *bru_name; > > > > + unsigned long flags; > > > > unsigned int i; > > int ret; > > > > @@ -250,6 +254,29 @@ int vsp1_du_setup_lif(struct device *dev, unsigned > > int pipe_index,> > > vsp1_write(vsp1, VI6_DISP_IRQ_STA, 0); > > vsp1_write(vsp1, VI6_DISP_IRQ_ENB, 0); > > > > + /* Configure all entities in the pipeline. */ > > + dl = vsp1_dl_list_get(pipe->output->dlm); > > + > > + list_for_each_entry_safe(entity, next, &pipe->entities, list_pipe) { > > + vsp1_entity_route_setup(entity, pipe, dl); > > + > > + if (entity->ops->configure) { > > + entity->ops->configure(entity, pipe, dl, > > + VSP1_ENTITY_PARAMS_INIT); > > + entity->ops->configure(entity, pipe, dl, > > + VSP1_ENTITY_PARAMS_RUNTIME); > > + entity->ops->configure(entity, pipe, dl, > > + VSP1_ENTITY_PARAMS_PARTITION); > > + } > > Hrm ... this configure section now has quite a lot duplicated from the > vsp1_du_atomic_flush(). Perhaps we could abstract that part out to a common > function - but I don't think that's essential. Let's do so on top of your pending patches then. Feel free to give it a go if you want to ;-) > > + } > > + > > + vsp1_dl_list_commit(dl); > > + > > + /* Start the pipeline. */ > > + spin_lock_irqsave(&pipe->irqlock, flags); > > + vsp1_pipeline_run(pipe); > > + spin_unlock_irqrestore(&pipe->irqlock, flags); > > + > > > > dev_dbg(vsp1->dev, "%s: pipeline enabled\n", __func__); > > > > return 0; > > > > @@ -488,7 +515,6 @@ void vsp1_du_atomic_flush(struct device *dev, unsigned > > int pipe_index)> > > struct vsp1_entity *next; > > struct vsp1_dl_list *dl; > > const char *bru_name; > > > > - unsigned long flags; > > > > unsigned int i; > > int ret; > > > > @@ -570,15 +596,6 @@ void vsp1_du_atomic_flush(struct device *dev, > > unsigned int pipe_index)> > > } > > > > vsp1_dl_list_commit(dl); > > > > - > > - /* Start or stop the pipeline if needed. */ > > - if (!drm_pipe->enabled && pipe->num_inputs) { > > - spin_lock_irqsave(&pipe->irqlock, flags); > > - vsp1_pipeline_run(pipe); > > - spin_unlock_irqrestore(&pipe->irqlock, flags); > > - } else if (drm_pipe->enabled && !pipe->num_inputs) { > > - vsp1_pipeline_stop(pipe); > > - } > > > > } > > EXPORT_SYMBOL_GPL(vsp1_du_atomic_flush); -- Regards, Laurent Pinchart