From: "Martin J. Bligh" <mbligh@aracnet.com>
To: linux-kernel <linux-kernel@vger.kernel.org>
Cc: a.j.dejong-1@student.utwente.nl
Subject: [Bug 1300] New: /dev/sound/dsp claims to be busy, but lsof gives nothing
Date: Tue, 30 Sep 2003 12:58:02 -0700 [thread overview]
Message-ID: <17860000.1064951882@flay> (raw)
http://bugme.osdl.org/show_bug.cgi?id=1300
Summary: /dev/sound/dsp claims to be busy, but lsof gives nothing
Kernel Version: Linux version 2.6.0-test6 (root@hennep.adsl.utwente.nl)
(gcc ver
Status: NEW
Severity: normal
Owner: bugme-janitors@lists.osdl.org
Submitter: a.j.dejong-1@student.utwente.nl
Distribution: Gentoo Linux 1.4 3.2.3-r1, propolice
Modules:
lp 8192 0 - Live 0xd8905000
radeon 117848 0 - Live 0xd893c000
sd_mod 11648 0 - Live 0xd88f9000
scsi_mod 60096 1 sd_mod, Live 0xd8908000
Hardware Environment:
/proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Celeron (Coppermine)
stepping : 3
cpu MHz : 631.565
cache size : 128 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
pat pse36 mmx fxsr sse
bogomips : 1245.18
/proc/ioports
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
02f8-02ff : serial
0376-0376 : ide1
0378-037a : parport0
037b-037f : parport0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0cf8-0cff : PCI conf1
1000-10ff : 0000:00:1f.5
1000-10ff : Intel 82801AA-ICH - AC'97
1400-141f : 0000:00:1f.2
1400-141f : uhci-hcd
1800-180f : 0000:00:1f.3
1c00-1c0f : 0000:00:1f.1
1c00-1c07 : ide0
1c08-1c0f : ide1
2000-203f : 0000:00:1f.5
2000-203f : Intel 82801AA-ICH - Controller
3000-30ff : 0000:01:09.0
3400-343f : 0000:01:08.0
3400-343f : e100
/proc/iomem
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000c7fff : Video ROM
000f0000-000fffff : System ROM
00100000-17feffff : System RAM
00100000-003b48f8 : Kernel code
003b48f9-004a8ebf : Kernel data
17ff0000-17fffbff : ACPI Tables
17fffc00-17ffffff : ACPI Non-volatile Storage
e8100000-e810ffff : 0000:01:09.0
e8110000-e8110fff : 0000:01:08.0
e8110000-e8110fff : e100
e8120000-e813ffff : 0000:01:08.0
e8120000-e813ffff : e100
f0000000-f7ffffff : 0000:01:09.0
fff00000-ffffffff : reserved
lspci -vvv
00:00.0 Host bridge: Intel Corp. 82810E DC-133 GMCH [Graphics Memory Controller
Hub] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step
ping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
00:1e.0 PCI bridge: Intel Corp. 82801AA PCI Bridge (rev 02) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step
ping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: e8100000-e81fffff
Prefetchable memory behind bridge: f0000000-f7ffffff
BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
00:1f.0 ISA bridge: Intel Corp. 82801AA ISA Bridge (LPC) (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Step
ping- SERR+ FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:1f.1 IDE interface: Intel Corp. 82801AA IDE (rev 02) (prog-if 80 [Master])
Subsystem: Intel Corp. 82801AA IDE
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 4: I/O ports at 1c00 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801AA USB (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corp. 82801AA USB
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1400 [size=32]
00:1f.3 SMBus: Intel Corp. 82801AA SMBus (rev 02)
Subsystem: Intel Corp. 82801AA SMBus
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 1800 [size=16]
00:1f.5 Multimedia audio controller: Intel Corp. 82801AA AC'97 Audio (rev 02)
Subsystem: Siemens Nixdorf AG: Unknown device 0049
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B-
Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 11
Region 0: I/O ports at 1000 [size=256]
Region 1: I/O ports at 2000 [size=64]
01:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 09)
Subsystem: Siemens Nixdorf AG: Unknown device 004b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+
Stepping- SERR+ FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), cache line size 08
Interrupt: pin A routed to IRQ 9
Region 0: Memory at e8110000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 3400 [size=64]
Region 2: Memory at e8120000 (32-bit, non-prefetchable) [size=128K]
Expansion ROM at <unassigned> [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,
D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
01:09.0 VGA compatible controller: ATI Technologies Inc Radeon RV200 QW [Radeon
7500] (prog-if 00 [VGA])
Subsystem: C.P. Technology Co. Ltd RV200 QW [Radeon 7500 PCI Dual
Display]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B+
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at e8100000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,
D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
/proc/asound/devices
1: : sequencer
0: [0- 0]: ctl
16: [0- 0]: digital audio playback
24: [0- 0]: digital audio capture
33: : timer
/proc/asound/oss/devices
1: : sequencer
8: : sequencer
3: [0- 3]: digital audio
0: [0- 0]: mixer
/proc/asound/version
Advanced Linux Sound Architecture Driver Version 0.9.7 (Thu Sep 25 19:16:36 2003
UTC).
Compiled on Sep 28 2003 for kernel 2.6.0-test6.
Software Environment:
Linux hennep.adsl.utwente.nl 2.6.0-test6 #1 Sun Sep 28 20:28:00 CEST 2003 i686
Celeron (Coppermine) GenuineIntel GNU/Linux
Gnu C 3.2.3
Gnu make 3.80
util-linux 2.11z
mount 2.11z
e2fsprogs 1.33
reiserfsprogs 3.6.8
xfsprogs 2.3.9
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.9
Net-tools 1.60
Kbd 1.06
Sh-utils 5.0
Modules Loaded lp radeon sd_mod scsi_mod
Problem Description:
When playing audio with cplay, it suddenly stops after about a day (both times
it happened while I was sleeping, so I don't know exactly, it could be exactly
24hrs). It won't start playing again, mplayer gives me 'Device /dev/sound/dsp is
busy' while 'lsof /dev/sound/dsp' gives me nothing. I tried restarting X, that
didn't help. Restarting the whole system did. I never had this problem with any
kernel before 2.6.0_test6. (I used all the 2.6.0 testkernels except test3)
Steps to reproduce:
let cplay play for a day on 2.6.0_test6
reply other threads:[~2003-09-30 22:29 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=17860000.1064951882@flay \
--to=mbligh@aracnet.com \
--cc=a.j.dejong-1@student.utwente.nl \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.