Re: [PATCH v3] Bluetooth: Properly disable remote wakeup for MT7922/MT7925 on Ryzen platform

[patchwork-bot+bluetooth@kernel.org]

Hello:

This patch was applied to bluetooth/bluetooth-next.git (master)
by Luiz Augusto von Dentz <luiz.von.dentz@intel.com>:

On Wed, 02 Sep 2026 02:19:18 +0800 you wrote:
> It is reported that a remote wakeup could cause MT7922/MT7925's btusb
> interface completely unresponsive. Resetting the xHCI root hub doesn't
> help at all, and recovering from such a state needs a power cycle.
> 
> All reports seen to be relevant to Ryzen-based laptops. These NICs are
> usually used as OEM components thanks to some sort of reference designs.
> Their popularity on other platforms is unclear. While there is still a
> chance that the quirk may exist on other platforms, be cautious and only
> apply the quirk to direct children of Ryzen platforms's root hubs for
> the time being. In most cases the root hub is on the SoC or PCH, which
> needs the quirk. Unfortunately, this can't distinguish root hubs on PCIe
> add-in cards. Such roughness should be acceptable, as PCIe USB
> controller add-in cards are less commonly used nowadays. On the other
> hand, applying the quirk doesn't hurt any functionalities either, as the
> device can still be used as a wakeup source if desired. Theoretically,
> we could retrieve the root hub's PCI vendor ID with some hierarchy
> magic, but that's too intrusive...
> 
> [...]

Here is the summary with links:
  - [v3] Bluetooth: Properly disable remote wakeup for MT7922/MT7925 on Ryzen platform
    https://git.kernel.org/bluetooth/bluetooth-next/c/512bf4484766

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html