[RFC PATCH bluetooth-next 2/3] dt-bindings: net: bluetooth: Add AIC8800D80

["Yanli Yang" <yanli.yang@bedmex.com>]

Describe the AIC8800D80 Bluetooth SDIO firmware-loading function and
UART HCI interface. Link the UART node to its SDIO firmware provider
with the aic,firmware-sdio phandle.

The UART interface uses H4 at 1500000 baud with hardware flow control.
Include an example showing both nodes and their association.

Signed-off-by: Zhirun Liu <zhirunliu@aicsemi.com>
Signed-off-by: Dijia Xu <dijiaxu@aicsemi.com>
Signed-off-by: Chunqiu Liu <chunqiuliu@aicsemi.com>
Signed-off-by: Liheng Wei <liheng.wei@bedmex.com>
Signed-off-by: Yanli Yang <yanli.yang@bedmex.com>
---
 .../net/bluetooth/aic,aic8800d80-bt.yaml      | 87 +++++++++++++++++++
 1 file changed, 87 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/bluetooth/aic,aic8800d80-bt.yaml

diff --git a/Documentation/devicetree/bindings/net/bluetooth/aic,aic8800d80-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/aic,aic8800d80-bt.yaml
new file mode 100644
index 000000000000..6fabb226cf15
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/bluetooth/aic,aic8800d80-bt.yaml
@@ -0,0 +1,87 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/bluetooth/aic,aic8800d80-bt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AIC AIC8800D80 Bluetooth
+
+maintainers:
+  - Zhirun Liu <zhirunliu@aicsemi.com>
+  - Dijia Xu <dijiaxu@aicsemi.com>
+  - Chunqiu Liu <chunqiuliu@aicsemi.com>
+  - Liheng Wei <liheng.wei@bedmex.com>
+  - Yanli Yang <yanli.yang@bedmex.com>
+
+description:
+  The AIC8800D80 is a Wi-Fi and Bluetooth combination chip. The Bluetooth
+  firmware is loaded through SDIO function 1, while Bluetooth HCI traffic uses
+  the H4 protocol over a UART interface with hardware flow control.
+
+properties:
+  compatible:
+    enum:
+      - aic,aic8800d80-bt
+      - aic,aic8800d80-bt-sdio
+
+  reg:
+    maxItems: 1
+
+  max-speed: true
+
+  aic,firmware-sdio:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to the SDIO function used to load the Bluetooth firmware.
+
+required:
+  - compatible
+
+allOf:
+  - $ref: bluetooth-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          const: aic,aic8800d80-bt-sdio
+    then:
+      properties:
+        reg:
+          const: 1
+        max-speed: false
+        aic,firmware-sdio: false
+      required:
+        - reg
+    else:
+      properties:
+        reg: false
+        max-speed:
+          const: 1500000
+      required:
+        - max-speed
+        - aic,firmware-sdio
+      allOf:
+        - $ref: /schemas/serial/serial-peripheral-props.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    mmc {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        bt_sdio: bluetooth@1 {
+            compatible = "aic,aic8800d80-bt-sdio";
+            reg = <1>;
+        };
+    };
+
+    serial {
+        uart-has-rtscts;
+
+        bluetooth {
+            compatible = "aic,aic8800d80-bt";
+            max-speed = <1500000>;
+            aic,firmware-sdio = <&bt_sdio>;
+        };
+    };
-- 
2.34.1