From: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
To: BOUIN Alexandre <abouin@domain.hid>
Cc: adeos-main@gna.org, xenomai@xenomai.org
Subject: Re: [Xenomai-core] [Adeos-main] New I-pipe patch for ARM needs testing.
Date: Fri, 22 Jun 2007 21:46:37 +0200 [thread overview]
Message-ID: <18044.10013.180616.301594@domain.hid> (raw)
In-Reply-To: <403B28AE6257B548B66BB88414AC78330174BC72@domain.hid>
BOUIN Alexandre wrote:
> Same tests but for AT91SAM9263-EK board :
> - one under DD load, latency set to 45µs
> - another one under Calibrator load, latency set to 30µs
> - and the last under Test_switch load, latency set to 45µs
> Xeno-test traces are available and the end of this mail.
>
> We used kernel 2.6.20.13, Xenomai snapshot from 08/06/2007, adeos-ipipe-2.6.20-arm-1.7-03.patch included plus 2.6.20-at91.patch.
>
> A little correction on macb and ipipe patch was needed :
> - macb ethernet controler is not detected on startup
> - we added some corrections to make 9263 usable under ipipe
> - owing to changes in at91 patch (clk are now registered on startup) we made a little correction for future adeos-ipipe-2.6.21-arm.patch.
>
> You will find all added patches attached to this mail.
> <<adeos-ipipe-2.6.20-arm-AT91.patch>> <<2.6.20-at91-macb-9263.patch>> <<adeos-ipipe-2.6.20-arm-AT91.patch>>
> Latencies are a little worst than on other boards. We presume that it's due to the large number of peripherals.
>
> Our latency tests on AT91 boards are done ;)
That is great, thanks. Your patch will be merged into future patches
(ipipe for 2.6.21 or 2.6.22), where support for 9263 was merged.
About the latency issue, have you checked that it is not due to the
prioritized interrupt controller ?
--
Gilles Chanteperdrix.
next prev parent reply other threads:[~2007-06-22 19:46 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-06-22 15:40 [Xenomai-core] [Adeos-main] New I-pipe patch for ARM needs testing BOUIN Alexandre
2007-06-22 15:47 ` Jan Kiszka
2007-06-22 19:46 ` Gilles Chanteperdrix [this message]
-- strict thread matches above, loose matches on Subject: below --
2007-06-13 12:10 BOUIN Alexandre
2007-06-13 12:10 BOUIN Alexandre
2007-06-13 12:50 ` Gilles Chanteperdrix
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=18044.10013.180616.301594@domain.hid \
--to=gilles.chanteperdrix@xenomai.org \
--cc=abouin@domain.hid \
--cc=adeos-main@gna.org \
--cc=xenomai@xenomai.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.