From: GitHub issues - edited <github@alsa-project.org>
To: alsa-devel@alsa-project.org
Subject: No Micrphone detected on ALC4080 - Gigabyte B850I Aorus Pro (rev 1.0)
Date: Tue, 18 Mar 2025 20:58:08 +0100 (CET) [thread overview]
Message-ID: <182dfdfb2a6ae800-webhooks-bot@alsa-project.org> (raw)
In-Reply-To: <182dfdfb2a626d00-webhooks-bot@alsa-project.org>
alsa-project/alsa-ucm-conf issue #528 was edited from chanster:
The Rear Microphone is not detected when I plug in my mic. I don't use the Front Audio connection as my case doesn't have I/O for it, I just used the 2 audio ports in the rear.
When I try recording directly I can get the mic to work, but it does not show up in the sound settings.
`arecord --duration=3 -D hw:CARD=2,DEV=1 -f dat -vvv a.wav`
```
Hardware PCM card 2 'USB Audio' device 1 subdevice 0
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 48000
exact rate : 48000 (48000/1)
msbits : 16
buffer_size : 24000
period_size : 6000
period_time : 125000
tstamp_mode : ENABLE
tstamp_type : MONOTONIC
period_step : 1
avail_min : 6000
period_event : 0
start_threshold : 1
stop_threshold : 24000
silence_threshold: 0
silence_size : 0
boundary : 6755399441055744000
appl_ptr : 0
hw_ptr : 0
Recording WAVE 'a.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
Max peak (12000 samples): 0x00000167 # 1%
Max peak (12000 samples): 0x000000da # 0%
Max peak (12000 samples): 0x000006b1 ## 5%
Max peak (12000 samples): 0x00000547 # 4%
Max peak (12000 samples): 0x00000729 ## 5%
Max peak (12000 samples): 0x00000a77 ## 8%
Max peak (12000 samples): 0x000006d2 ## 5%
Max peak (12000 samples): 0x000005ec # 4%
Max peak (12000 samples): 0x00000627 # 4%
Max peak (12000 samples): 0x00000d32 ### 10%
Max peak (12000 samples): 0x00000e9f ### 11%
Max peak (12000 samples): 0x00003813 ######### 43%
Max peak (12000 samples): 0x00006278 ################ 76%
Max peak (12000 samples): 0x00007fff #################### 99%
Max peak (12000 samples): 0x00006694 ################# 80%
Max peak (12000 samples): 0x000068ea ################# 81%
Max peak (12000 samples): 0x00004ba0 ############ 59%
Max peak (12000 samples): 0x0000207c ###### 25%
Max peak (12000 samples): 0x000017e9 #### 18%
Max peak (12000 samples): 0x00003938 ######### 44%
Max peak (12000 samples): 0x00001f11 ##### 24%
Max peak (12000 samples): 0x00000ee5 ### 11%
Max peak (12000 samples): 0x00003944 ######### 44%
Max peak (12000 samples): 0x00003942 ######### 44%
```
Motherboard: Gigabyte B850I Aorus Pro (rev 1.0)
Audio Device: ALC4080
Distro: Fedora 41
Window Manager: Gnome-Shell
Packages:
```
dnf list --installed | grep 'pipewire\|pulseaudio\|alsa'
alsa-lib.i686 1.2.13-3.fc41 updates
alsa-lib.x86_64 1.2.13-3.fc41 updates
alsa-ucm.noarch 1.2.13-3.fc41 updates
alsa-ucm-utils.x86_64 1.2.13-2.fc41 updates
alsa-utils.x86_64 1.2.13-2.fc41 updates
pipewire.i686 1.2.7-7.fc41 updates
pipewire.x86_64 1.2.7-7.fc41 updates
pipewire-alsa.i686 1.2.7-7.fc41 updates
pipewire-alsa.x86_64 1.2.7-7.fc41 updates
pipewire-gstreamer.x86_64 1.2.7-7.fc41 updates
pipewire-libs.i686 1.2.7-7.fc41 updates
pipewire-libs.x86_64 1.2.7-7.fc41 updates
pipewire-pulseaudio.x86_64 1.2.7-7.fc41 updates
pipewire-utils.x86_64 1.2.7-7.fc41 updates
pulseaudio-libs.i686 17.0-2.fc41 fedora
pulseaudio-libs.x86_64 17.0-2.fc41 fedora
pulseaudio-libs-glib2.x86_64 17.0-2.fc41 fedora
wine-alsa.i686 10.1-1.fc41 updates
wine-alsa.x86_64 10.1-1.fc41 updates
wine-pulseaudio.i686 10.1-1.fc41 updates
wine-pulseaudio.x86_64 10.1-1.fc41 updates
```
`lsusb | grep -i audio`
```
Bus 001 Device 002: ID 0414:a014 Giga-Byte Technology Co., Ltd USB Audio
```
`alsactl monitor` (unplugging and plugging mic)
```
node hw:2, #9 (0,0,0,Mic - Input Jack,1) VALUE
node hw:2, #9 (0,0,0,Mic - Input Jack,1) VALUE
```
`amixer -c events` (unplugging and plugging mic)
```
event value: numid=9,iface=CARD,name='Mic - Input Jack',index=1
event value: numid=9,iface=CARD,name='Mic - Input Jack',index=1
```
`amixer -c 2 contents`
```
numid=8,iface=CARD,name='Clock Source 3 Validity'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=12,iface=CARD,name='Clock Source 4 Validity'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=15,iface=CARD,name='Clock Source 5 Validity'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=19,iface=CARD,name='Clock Source 6 Validity'
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=20,iface=CARD,name='Headphone - Output Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=5,iface=CARD,name='Mic - Input Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=9,iface=CARD,name='Mic - Input Jack',index=1
; type=BOOLEAN,access=r-------,values=1
: values=on
numid=16,iface=CARD,name='Speaker - Output Jack'
; type=BOOLEAN,access=r-------,values=1
: values=off
numid=13,iface=MIXER,name='PCM Playback Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=17,iface=MIXER,name='PCM Playback Switch',index=1
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=14,iface=MIXER,name='PCM Playback Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=87,step=0
: values=62,62
| dBminmax-min=-65.25dB,max=0.00dB
numid=18,iface=MIXER,name='PCM Playback Volume',index=1
; type=INTEGER,access=rw---R--,values=2,min=0,max=87,step=0
: values=62,62
| dBminmax-min=-65.25dB,max=0.00dB
numid=6,iface=MIXER,name='Mic Capture Switch'
; type=BOOLEAN,access=rw------,values=1
: values=off
numid=10,iface=MIXER,name='Mic Capture Switch',index=1
; type=BOOLEAN,access=rw------,values=1
: values=on
numid=7,iface=MIXER,name='Mic Capture Volume'
; type=INTEGER,access=rw---R--,values=2,min=0,max=39,step=0
: values=39,39
| dBminmax-min=-17.25dB,max=12.00dB
numid=11,iface=MIXER,name='Mic Capture Volume',index=1
; type=INTEGER,access=rw---R--,values=2,min=0,max=39,step=0
: values=39,39
| dBminmax-min=-17.25dB,max=12.00dB
numid=1,iface=PCM,name='Capture Channel Map'
; type=INTEGER,access=r--v-R--,values=2,min=0,max=36,step=0
: values=0,0
| container
| chmap-fixed=FL,FR
numid=3,iface=PCM,name='Playback Channel Map'
; type=INTEGER,access=r--v-R--,values=2,min=0,max=36,step=0
: values=0,0
| container
| chmap-fixed=FL,FR
numid=2,iface=PCM,name='Capture Channel Map',device=1
; type=INTEGER,access=r--v-R--,values=2,min=0,max=36,step=0
: values=0,0
| container
| chmap-fixed=FL,FR
numid=4,iface=PCM,name='Playback Channel Map',device=1
; type=INTEGER,access=r--v-R--,values=2,min=0,max=36,step=0
: values=0,0
| container
| chmap-fixed=FL,FR
```
`arecord -l`
```
**** List of CAPTURE Hardware Devices ****
card 2: Audio [USB Audio], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: Audio [USB Audio], device 1: USB Audio [USB Audio #1]
Subdevices: 1/1
Subdevice #0: subdevice #0
```
`alsaucm -c hw:2 dump text`
```
Verb.HiFi {
Comment "HiFi 2.0 channels"
Device.Speaker {
Comment Speakers
Values {
CaptureCTL "_ucm0001.hw:Audio"
JackControl "Speaker - Output Jack"
PlaybackCTL "_ucm0001.hw:Audio"
PlaybackChannels 2
PlaybackMixerElem PCM,0
PlaybackPCM "_ucm0001.hw:Audio"
PlaybackPriority 200
TQ HiFi
}
}
Device.Headphones {
Comment "Front Headphones"
Values {
CaptureCTL "_ucm0001.hw:Audio"
JackControl "Headphone - Output Jack"
PlaybackCTL "_ucm0001.hw:Audio"
PlaybackMixerElem PCM,1
PlaybackPCM "_ucm0001.hw:Audio,1"
PlaybackPriority 300
TQ HiFi
}
}
Device.Mic1 {
Comment "Front Microphone"
Values {
CaptureCTL "_ucm0001.hw:Audio"
CaptureMixerElem Mic,0
CapturePCM "_ucm0001.hw:Audio,0"
CapturePriority 300
JackControl "Mic - Input Jack"
PlaybackCTL "_ucm0001.hw:Audio"
TQ HiFi
}
}
}
Verb."HiFi 5+1" {
Comment "HiFi 5.1 channels"
Device.Speaker {
Comment Speakers
Values {
CaptureCTL "_ucm0001.hw:Audio"
JackControl "Speaker - Output Jack"
PlaybackCTL "_ucm0001.hw:Audio"
PlaybackChannels 6
PlaybackMixerElem PCM,0
PlaybackPCM "_ucm0001.hw:Audio"
PlaybackPriority 200
TQ HiFi
}
}
Device.Headphones {
Comment "Front Headphones"
Values {
CaptureCTL "_ucm0001.hw:Audio"
JackControl "Headphone - Output Jack"
PlaybackCTL "_ucm0001.hw:Audio"
PlaybackMixerElem PCM,1
PlaybackPCM "_ucm0001.hw:Audio,1"
PlaybackPriority 300
TQ HiFi
}
}
Device.Mic1 {
Comment "Front Microphone"
Values {
CaptureCTL "_ucm0001.hw:Audio"
CaptureMixerElem Mic,0
CapturePCM "_ucm0001.hw:Audio,0"
CapturePriority 300
JackControl "Mic - Input Jack"
PlaybackCTL "_ucm0001.hw:Audio"
TQ HiFi
}
}
}
Verb."HiFi 7+1" {
Comment "HiFi 7.1 channels"
Device.Speaker {
Comment Speakers
Values {
CaptureCTL "_ucm0001.hw:Audio"
JackControl "Speaker - Output Jack"
PlaybackCTL "_ucm0001.hw:Audio"
PlaybackChannels 8
PlaybackMixerElem PCM,0
PlaybackPCM "_ucm0001.hw:Audio"
PlaybackPriority 200
TQ HiFi
}
}
Device.Headphones {
Comment "Front Headphones"
Values {
CaptureCTL "_ucm0001.hw:Audio"
JackControl "Headphone - Output Jack"
PlaybackCTL "_ucm0001.hw:Audio"
PlaybackMixerElem PCM,1
PlaybackPCM "_ucm0001.hw:Audio,1"
PlaybackPriority 300
TQ HiFi
}
}
Device.Mic1 {
Comment "Front Microphone"
Values {
CaptureCTL "_ucm0001.hw:Audio"
CaptureMixerElem Mic,0
CapturePCM "_ucm0001.hw:Audio,0"
CapturePriority 300
JackControl "Mic - Input Jack"
PlaybackCTL "_ucm0001.hw:Audio"
TQ HiFi
}
}
}
```
Issue URL : https://github.com/alsa-project/alsa-ucm-conf/issues/528
Repository URL: https://github.com/alsa-project/alsa-ucm-conf
next parent reply other threads:[~2025-03-18 19:58 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <182dfdfb2a626d00-webhooks-bot@alsa-project.org>
2025-03-18 19:58 ` GitHub issues - edited [this message]
[not found] <182dfcdcc6888800-webhooks-bot@alsa-project.org>
2025-03-18 19:37 ` No Micrphone detected on ALC4080 - Gigabyte B850I Aorus Pro (rev 1.0) GitHub issues - edited
[not found] <182dfc8a3aa2dd00-webhooks-bot@alsa-project.org>
2025-03-18 19:31 ` GitHub issues - edited
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=182dfdfb2a6ae800-webhooks-bot@alsa-project.org \
--to=github@alsa-project.org \
--cc=alsa-devel@alsa-project.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.