From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laurent Pinchart Subject: Re: [PATCH RFC v2] media: tvp514x: add OF support Date: Sun, 03 Feb 2013 14:14 +0100 Message-ID: <1832736.hCOhBbmy4r@avalon> References: <1359464832-8875-1-git-send-email-prabhakar.lad@ti.com> <510C43A0.7090906@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7Bit Return-path: In-Reply-To: Sender: linux-doc-owner@vger.kernel.org To: Prabhakar Lad Cc: Sylwester Nawrocki , LMML , DLOS , "Lad, Prabhakar" , Hans Verkuil , Mauro Carvalho Chehab , Guennadi Liakhovetski , Sylwester Nawrocki , Sakari Ailus , Grant Likely , Rob Herring , Rob Landley , devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org Hi Prabhakar, On Sunday 03 February 2013 15:43:49 Prabhakar Lad wrote: > On Sat, Feb 2, 2013 at 4:07 AM, Sylwester Nawrocki wrote: > > On 01/29/2013 02:07 PM, Prabhakar Lad wrote: > > [...] > > > >> diff --git a/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > >> b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > >> new file mode 100644 > >> index 0000000..55d3ffd > >> --- /dev/null > >> +++ b/Documentation/devicetree/bindings/media/i2c/tvp514x.txt > >> @@ -0,0 +1,38 @@ > >> +* Texas Instruments TVP514x video decoder > >> + > >> +The TVP5146/TVP5146m2/TVP5147/TVP5147m1 device is high quality, > >> +single-chip digital video decoder that digitizes and decodes all popular > >> +baseband analog video formats into digital video component. The tvp514x > >> +decoder supports analog-to-digital (A/D) conversion of component RGB and > >> +YPbPr signals as well as A/D conversion and decoding of NTSC, PAL and > >> +SECAM composite and S-video into component YCbCr. > >> + > >> +Required Properties : > >> +- compatible: Must be "ti,tvp514x-decoder" > > > > There are no significant differences among TVP514* devices as listed > > above, you would like to handle above ? > > > > I'm just wondering if you don't need, for instance, two separate > > compatible properties, e.g. "ti,tvp5146-decoder" and "ti,tvp5147-decoder" > > ? > > There are few differences in init/power sequence tough, I would still > like to have single compatible property "ti,tvp514x-decoder", If you feel we > need separate property I will change it please let me know on this. If there's any difference between the chips that need to be handled in the driver, using two compatible properties is a good practice. Your driver will then be able to easily differentiate between the two chips, and there's no real drawback in doing so. -- Regards, Laurent Pinchart