Pressing the power button causes the device to freeze completely

[Evgeny Sagatov <sagatov@ya.ru>]

[-- Attachment #1: Type: text/html, Size: 1977 bytes --]

[-- Attachment #2: dmesg.log --]
[-- Type: text/plain, Size: 62352 bytes --]

[    0.000000] Linux version 6.12.74+deb13+1-amd64 (debian-kernel@lists.debian.org) (x86_64-linux-gnu-gcc-14 (Debian 14.2.0-19) 14.2.0, GNU ld (GNU Binutils for Debian) 2.44) #1 SMP PREEMPT_DYNAMIC Debian 6.12.74-2 (2026-03-08)
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.12.74+deb13+1-amd64 root=UUID=6d057775-1872-424c-857d-a9956029d8b0 ro i8042.noaux quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000093bff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000efedffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000efee0000-0x00000000efee1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000efee2000-0x00000000efeeffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000efef0000-0x00000000efefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000040fffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] APIC: Static calls initialized
[    0.000000] SMBIOS 2.4 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. EP45T-UD3LR/EP45T-UD3LR, BIOS F12e 10/14/2011
[    0.000000] DMI: Memory slots populated: 4/4
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2833.096 MHz processor
[    0.004637] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.004640] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.004646] last_pfn = 0x410000 max_arch_pfn = 0x400000000
[    0.004654] MTRR map: 8 entries (5 fixed + 3 variable; max 21), built from 8 variable MTRRs
[    0.004656] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.006178] e820: update [mem 0xeff00000-0xffffffff] usable ==> reserved
[    0.006186] last_pfn = 0xefef0 max_arch_pfn = 0x400000000
[    0.011667] found SMP MP-table at [mem 0x000f5510-0x000f551f]
[    0.012583] RAMDISK: [mem 0x35f31000-0x36f8ffff]
[    0.012640] ACPI: Early table checksum verification disabled
[    0.012643] ACPI: RSDP 0x00000000000F6F20 000014 (v00 GBT   )
[    0.012648] ACPI: RSDT 0x00000000EFEE2040 000040 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.012654] ACPI: FACP 0x00000000EFEE20C0 000074 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.012660] ACPI: DSDT 0x00000000EFEE2180 004BE1 (v01 GBT    GBTUACPI 00001000 MSFT 0100000C)
[    0.012664] ACPI: FACS 0x00000000EFEE0000 000040
[    0.012667] ACPI: HPET 0x00000000EFEE6EC0 000038 (v01 GBT    GBTUACPI 42302E31 GBTU 00000098)
[    0.012671] ACPI: MCFG 0x00000000EFEE6F40 00003C (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.012675] ACPI: EUDS 0x00000000EFEE6F80 000560 (v01 GBT             00000000      00000000)
[    0.012679] ACPI: TAMG 0x00000000EFEE74E0 00670A (v01 GBT    GBT   B0 5455312E BG?? 00020101)
[    0.012683] ACPI: APIC 0x00000000EFEE6DC0 000084 (v01 GBT    GBTUACPI 42302E31 GBTU 01010101)
[    0.012686] ACPI: SSDT 0x00000000EFEEE520 0003AB (v01 PmRef  CpuPm    00003000 INTL 20040311)
[    0.012689] ACPI: Reserving FACP table memory at [mem 0xefee20c0-0xefee2133]
[    0.012691] ACPI: Reserving DSDT table memory at [mem 0xefee2180-0xefee6d60]
[    0.012692] ACPI: Reserving FACS table memory at [mem 0xefee0000-0xefee003f]
[    0.012693] ACPI: Reserving HPET table memory at [mem 0xefee6ec0-0xefee6ef7]
[    0.012695] ACPI: Reserving MCFG table memory at [mem 0xefee6f40-0xefee6f7b]
[    0.012696] ACPI: Reserving EUDS table memory at [mem 0xefee6f80-0xefee74df]
[    0.012697] ACPI: Reserving TAMG table memory at [mem 0xefee74e0-0xefeedbe9]
[    0.012698] ACPI: Reserving APIC table memory at [mem 0xefee6dc0-0xefee6e43]
[    0.012699] ACPI: Reserving SSDT table memory at [mem 0xefeee520-0xefeee8ca]
[    0.012765] No NUMA configuration found
[    0.012767] Faking a node at [mem 0x0000000000000000-0x000000040fffffff]
[    0.012779] NODE_DATA(0) allocated [mem 0x40ffca680-0x40fff4fff]
[    0.013148] Zone ranges:
[    0.013149]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.013151]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.013153]   Normal   [mem 0x0000000100000000-0x000000040fffffff]
[    0.013155]   Device   empty
[    0.013156] Movable zone start for each node
[    0.013158] Early memory node ranges
[    0.013159]   node   0: [mem 0x0000000000001000-0x0000000000092fff]
[    0.013161]   node   0: [mem 0x0000000000100000-0x00000000efedffff]
[    0.013163]   node   0: [mem 0x0000000100000000-0x000000040fffffff]
[    0.013166] Initmem setup node 0 [mem 0x0000000000001000-0x000000040fffffff]
[    0.013173] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.013211] On node 0, zone DMA: 109 pages in unavailable ranges
[    0.033027] On node 0, zone Normal: 288 pages in unavailable ranges
[    0.033126] ACPI: PM-Timer IO Port: 0x408
[    0.033140] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[    0.033142] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[    0.033143] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[    0.033144] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[    0.033155] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.033158] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.033161] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.033166] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.033167] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.033179] CPU topo: Max. logical packages:   1
[    0.033180] CPU topo: Max. logical dies:       1
[    0.033181] CPU topo: Max. dies per package:   1
[    0.033186] CPU topo: Max. threads per core:   1
[    0.033188] CPU topo: Num. cores per package:     4
[    0.033188] CPU topo: Num. threads per package:   4
[    0.033189] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs
[    0.033203] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.033206] PM: hibernation: Registered nosave memory: [mem 0x00093000-0x000fffff]
[    0.033207] PM: hibernation: Registered nosave memory: [mem 0xefee0000-0xffffffff]
[    0.033209] [mem 0xeff00000-0xf7ffffff] available for PCI devices
[    0.033211] Booting paravirtualized kernel on bare hardware
[    0.033215] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.041680] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.042465] percpu: Embedded 66 pages/cpu s233472 r8192 d28672 u524288
[    0.042471] pcpu-alloc: s233472 r8192 d28672 u524288 alloc=1*2097152
[    0.042474] pcpu-alloc: [0] 0 1 2 3 
[    0.042493] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.12.74+deb13+1-amd64 root=UUID=6d057775-1872-424c-857d-a9956029d8b0 ro i8042.noaux quiet
[    0.047464] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.050165] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.050267] Fallback order for Node 0: 0 
[    0.050276] Built 1 zonelists, mobility grouping on.  Total pages: 4193906
[    0.050277] Policy zone: Normal
[    0.050290] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
[    0.050297] software IO TLB: area num 4.
[    0.133058] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.133208] Kernel/User page tables isolation: enabled
[    0.133315] ftrace: allocating 45735 entries in 179 pages
[    0.142026] ftrace: allocated 179 pages with 5 groups
[    0.142940] Dynamic Preempt: voluntary
[    0.143111] rcu: Preemptible hierarchical RCU implementation.
[    0.143112] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[    0.143113] 	Trampoline variant of Tasks RCU enabled.
[    0.143114] 	Rude variant of Tasks RCU enabled.
[    0.143115] 	Tracing variant of Tasks RCU enabled.
[    0.143115] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.143116] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.143129] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.143132] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.143134] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4.
[    0.150411] NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
[    0.150631] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.154993] Console: colour VGA+ 80x25
[    0.154997] printk: legacy console [tty0] enabled
[    0.155249] ACPI: Core revision 20240827
[    0.155411] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.155425] APIC: Switch to symmetric I/O mode setup
[    0.155795] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.175424] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x28d6616e279, max_idle_ns: 440795241306 ns
[    0.175432] Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.19 BogoMIPS (lpj=11332384)
[    0.175454] CPU0: Thermal monitoring enabled (TM2)
[    0.175476] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[    0.175479] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[    0.175482] process: using mwait in idle threads
[    0.175485] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.175487] Spectre V2 : Mitigation: Retpolines
[    0.175489] Spectre V2 : Spectre v2 / SpectreRSB: Filling RSB on context switch and VMEXIT
[    0.175490] Speculative Store Bypass: Vulnerable
[    0.175492] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[    0.175493] MMIO Stale Data: Unknown: No mitigations
[    0.175499] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.175501] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.175502] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'standard' format.
[    0.196977] Freeing SMP alternatives memory: 40K
[    0.196986] pid_max: default: 32768 minimum: 301
[    0.197753] LSM: initializing lsm=lockdown,capability,landlock,yama,apparmor,tomoyo,bpf,ipe,ima,evm
[    0.198087] landlock: Up and running.
[    0.198088] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.198198] AppArmor: AppArmor initialized
[    0.198224] TOMOYO Linux initialized
[    0.198478] LSM support for eBPF active
[    0.198824] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.198867] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[    0.308576] smpboot: CPU0: Intel(R) Core(TM)2 Quad CPU    Q9550  @ 2.83GHz (family: 0x6, model: 0x17, stepping: 0xa)
[    0.308965] Performance Events: PEBS fmt0+, Core2 events, 4-deep LBR, Intel PMU driver.
[    0.308983] ... version:                2
[    0.308984] ... bit width:              40
[    0.308986] ... generic registers:      2
[    0.308987] ... value mask:             000000ffffffffff
[    0.308988] ... max period:             000000007fffffff
[    0.308989] ... fixed-purpose events:   3
[    0.308990] ... event mask:             0000000700000003
[    0.309114] signal: max sigframe size: 1520
[    0.309153] rcu: Hierarchical SRCU implementation.
[    0.309155] rcu: 	Max phase no-delay instances is 1000.
[    0.309228] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level
[    0.309748] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.309834] smp: Bringing up secondary CPUs ...
[    0.310030] smpboot: x86: Booting SMP configuration:
[    0.310032] .... node  #0, CPUs:      #1 #2 #3
[    0.315503] smp: Brought up 1 node, 4 CPUs
[    0.315503] smpboot: Total of 4 processors activated (22664.76 BogoMIPS)
[    0.378326] node 0 deferred pages initialised in 56ms
[    0.378339] Memory: 16353420K/16775624K available (16384K kernel code, 2498K rwdata, 11800K rodata, 4156K init, 4928K bss, 416828K reserved, 0K cma-reserved)
[    0.379543] devtmpfs: initialized
[    0.379567] x86/mm: Memory block size: 128MB
[    0.382104] ACPI: PM: Registering ACPI NVS region [mem 0xefee0000-0xefee1fff] (8192 bytes)
[    0.382104] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.382104] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[    0.382104] pinctrl core: initialized pinctrl subsystem
[    0.384298] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.384912] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations
[    0.385385] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.385918] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.385947] audit: initializing netlink subsys (disabled)
[    0.385975] thermal_sys: Registered thermal governor 'fair_share'
[    0.385975] thermal_sys: Registered thermal governor 'bang_bang'
[    0.385975] thermal_sys: Registered thermal governor 'step_wise'
[    0.385975] thermal_sys: Registered thermal governor 'user_space'
[    0.385975] thermal_sys: Registered thermal governor 'power_allocator'
[    0.385975] audit: type=2000 audit(1776097996.228:1): state=initialized audit_enabled=0 res=1
[    0.385975] cpuidle: using governor ladder
[    0.385975] cpuidle: using governor menu
[    0.385975] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.385975] PCI: ECAM [mem 0xf8000000-0xfbffffff] (base 0xf8000000) for domain 0000 [bus 00-3f]
[    0.385975] PCI: ECAM [mem 0xf8000000-0xfbffffff] reserved as E820 entry
[    0.385975] PCI: Using configuration type 1 for base access
[    0.385975] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.388773] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    0.388773] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    0.389144] ACPI: Added _OSI(Module Device)
[    0.389144] ACPI: Added _OSI(Processor Device)
[    0.389144] ACPI: Added _OSI(Processor Aggregator Device)
[    0.393137] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.395821] ACPI: Dynamic OEM Table Load:
[    0.395821] ACPI: SSDT 0xFFFF8A9540F09400 00022A (v01 PmRef  Cpu0Ist  00003000 INTL 20040311)
[    0.395821] ACPI: Dynamic OEM Table Load:
[    0.395821] ACPI: SSDT 0xFFFF8A95573E2600 000152 (v01 PmRef  Cpu1Ist  00003000 INTL 20040311)
[    0.396010] ACPI: Dynamic OEM Table Load:
[    0.396015] ACPI: SSDT 0xFFFF8A95573E2400 000152 (v01 PmRef  Cpu2Ist  00003000 INTL 20040311)
[    0.396231] ACPI: Dynamic OEM Table Load:
[    0.396236] ACPI: SSDT 0xFFFF8A95573E3600 000152 (v01 PmRef  Cpu3Ist  00003000 INTL 20040311)
[    0.396567] ACPI: Interpreter enabled
[    0.396584] ACPI: PM: (supports S0 S3 S4 S5)
[    0.396586] ACPI: Using IOAPIC for interrupt routing
[    0.396611] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.396613] PCI: Using E820 reservations for host bridge windows
[    0.396739] ACPI: Enabled 11 GPEs in block 00 to 3F
[    0.402347] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.402354] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.402672] PCI host bridge to bus 0000:00
[    0.402676] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.402679] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.402682] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    0.402684] pci_bus 0000:00: root bus resource [mem 0xeff00000-0xfebfffff window]
[    0.402686] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.402703] pci 0000:00:00.0: [8086:2e20] type 00 class 0x060000 conventional PCI endpoint
[    0.402724] pci 0000:00:00.0: DMAR: Disabling IOMMU for graphics on this chipset
[    0.402726] pci 0000:00:00.0: DMAR: Forcing write-buffer flush capability
[    0.402810] pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300 conventional PCI endpoint
[    0.402845] pci 0000:00:1a.0: BAR 4 [io  0xff00-0xff1f]
[    0.402961] pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300 conventional PCI endpoint
[    0.402996] pci 0000:00:1a.1: BAR 4 [io  0xfe00-0xfe1f]
[    0.403108] pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300 conventional PCI endpoint
[    0.403144] pci 0000:00:1a.2: BAR 4 [io  0xfd00-0xfd1f]
[    0.403263] pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320 conventional PCI endpoint
[    0.403278] pci 0000:00:1a.7: BAR 0 [mem 0xfdfff000-0xfdfff3ff]
[    0.403435] pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400 PCIe Root Port
[    0.403454] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.403510] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.403626] pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400 PCIe Root Port
[    0.403649] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.403653] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.403657] pci 0000:00:1c.3:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.403665] pci 0000:00:1c.3:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.403710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.403827] pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300 conventional PCI endpoint
[    0.403862] pci 0000:00:1d.0: BAR 4 [io  0xfc00-0xfc1f]
[    0.403982] pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300 conventional PCI endpoint
[    0.404017] pci 0000:00:1d.1: BAR 4 [io  0xfb00-0xfb1f]
[    0.404131] pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300 conventional PCI endpoint
[    0.404166] pci 0000:00:1d.2: BAR 4 [io  0xfa00-0xfa1f]
[    0.404287] pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320 conventional PCI endpoint
[    0.404302] pci 0000:00:1d.7: BAR 0 [mem 0xfdffe000-0xfdffe3ff]
[    0.404444] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401 conventional PCI bridge
[    0.404465] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.404471] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf7ffffff]
[    0.404584] pci 0000:00:1f.0: [8086:3a16] type 00 class 0x060100 conventional PCI endpoint
[    0.404654] pci 0000:00:1f.0: quirk: [io  0x0400-0x047f] claimed by ICH6 ACPI/GPIO/TCO
[    0.404659] pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
[    0.404662] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[    0.404665] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[    0.404795] pci 0000:00:1f.2: [8086:2822] type 00 class 0x010400 conventional PCI endpoint
[    0.404807] pci 0000:00:1f.2: BAR 0 [io  0xf900-0xf907]
[    0.404814] pci 0000:00:1f.2: BAR 1 [io  0xf800-0xf803]
[    0.404820] pci 0000:00:1f.2: BAR 2 [io  0xf700-0xf707]
[    0.404827] pci 0000:00:1f.2: BAR 3 [io  0xf600-0xf603]
[    0.404833] pci 0000:00:1f.2: BAR 4 [io  0xf500-0xf51f]
[    0.404839] pci 0000:00:1f.2: BAR 5 [mem 0xfdffd000-0xfdffd7ff]
[    0.404874] pci 0000:00:1f.2: PME# supported from D3hot
[    0.404960] pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500 conventional PCI endpoint
[    0.404976] pci 0000:00:1f.3: BAR 0 [mem 0xfdffc000-0xfdffc0ff 64bit]
[    0.404993] pci 0000:00:1f.3: BAR 4 [io  0x0500-0x051f]
[    0.405114] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.405184] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 PCIe Endpoint
[    0.405204] pci 0000:02:00.0: BAR 0 [io  0xee00-0xeeff]
[    0.405229] pci 0000:02:00.0: BAR 2 [mem 0xfddff000-0xfddfffff 64bit]
[    0.405245] pci 0000:02:00.0: BAR 4 [mem 0xfdefc000-0xfdefffff 64bit pref]
[    0.405337] pci 0000:02:00.0: supports D1 D2
[    0.405339] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.405466] pci 0000:00:1c.3: ASPM: current common clock configuration is inconsistent, reconfiguring
[    0.411449] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.411472] pci_bus 0000:03: extended config space not accessible
[    0.411498] pci 0000:03:00.0: [5333:8901] type 00 class 0x030000 conventional PCI endpoint
[    0.411514] pci 0000:03:00.0: BAR 0 [mem 0xf0000000-0xf3ffffff]
[    0.411554] pci 0000:03:00.0: ROM [mem 0x00000000-0x0000ffff pref]
[    0.411595] pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.411669] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[    0.411678] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
[    0.411680] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.411682] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
[    0.411684] pci 0000:00:1e.0:   bridge window [mem 0xeff00000-0xfebfffff window] (subtractive decode)
[    0.412575] ACPI: PCI: Interrupt link LNKA configured for IRQ 12
[    0.412619] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    0.412621] ACPI: PCI: Interrupt link LNKB disabled
[    0.412663] ACPI: PCI: Interrupt link LNKC configured for IRQ 7
[    0.412706] ACPI: PCI: Interrupt link LNKD configured for IRQ 11
[    0.412749] ACPI: PCI: Interrupt link LNKE configured for IRQ 10
[    0.412791] ACPI: PCI: Interrupt link LNKF configured for IRQ 3
[    0.412838] ACPI: PCI: Interrupt link LNK0 configured for IRQ 0
[    0.412840] ACPI: PCI: Interrupt link LNK0 disabled
[    0.412882] ACPI: PCI: Interrupt link LNK1 configured for IRQ 5
[    0.413081] iommu: Default domain type: Translated
[    0.413081] iommu: DMA domain TLB invalidation policy: lazy mode
[    0.413081] pps_core: LinuxPPS API ver. 1 registered
[    0.413081] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.413081] PTP clock support registered
[    0.413081] EDAC MC: Ver: 3.0.0
[    0.413081] NetLabel: Initializing
[    0.413081] NetLabel:  domain hash size = 128
[    0.413081] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.413081] NetLabel:  unlabeled traffic allowed by default
[    0.413081] PCI: Using ACPI for IRQ routing
[    0.413081] PCI: pci_cache_line_size set to 64 bytes
[    0.413081] e820: reserve RAM buffer [mem 0x00093c00-0x0009ffff]
[    0.413081] e820: reserve RAM buffer [mem 0xefee0000-0xefffffff]
[    0.413081] pci 0000:03:00.0: vgaarb: setting as boot VGA device
[    0.413081] pci 0000:03:00.0: vgaarb: bridge control possible
[    0.413081] pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.413081] vgaarb: loaded
[    0.413081] hpet: 4 channels of 0 reserved for per-cpu timers
[    0.413081] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.413081] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.416466] clocksource: Switched to clocksource tsc-early
[    0.417102] VFS: Disk quotas dquot_6.6.0
[    0.417154] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.417169] AppArmor: AppArmor Filesystem Enabled
[    0.417169] pnp: PnP ACPI init
[    0.417169] system 00:00: [io  0x04d0-0x04d1] has been reserved
[    0.417169] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.417169] system 00:00: [io  0x0800-0x087f] has been reserved
[    0.417169] system 00:00: [io  0x0290-0x0294] has been reserved
[    0.417169] system 00:00: [io  0x0880-0x088f] has been reserved
[    0.417169] system 00:02: [io  0x0400-0x04cf] could not be reserved
[    0.417169] system 00:02: [io  0x04d2-0x04ff] has been reserved
[    0.417169] system 00:03: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.417232] system 00:04: [mem 0x000f0000-0x000f3fff] could not be reserved
[    0.417236] system 00:04: [mem 0x000f4000-0x000f7fff] could not be reserved
[    0.417238] system 00:04: [mem 0x000f8000-0x000fbfff] could not be reserved
[    0.417240] system 00:04: [mem 0x000fc000-0x000fffff] could not be reserved
[    0.417242] system 00:04: [mem 0xefee0000-0xefeeffff] could not be reserved
[    0.417244] system 00:04: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.417246] system 00:04: [mem 0x00100000-0xefedffff] could not be reserved
[    0.417249] system 00:04: [mem 0xefef0000-0xefefffff] has been reserved
[    0.417251] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.417254] system 00:04: [mem 0xfed10000-0xfed1dfff] has been reserved
[    0.417256] system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
[    0.417258] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.417260] system 00:04: [mem 0xffb00000-0xffb7ffff] has been reserved
[    0.417263] system 00:04: [mem 0xfff00000-0xffffffff] has been reserved
[    0.417265] system 00:04: [mem 0x000e0000-0x000effff] has been reserved
[    0.417275] pnp: PnP ACPI: found 5 devices
[    0.423884] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.424074] NET: Registered PF_INET protocol family
[    0.424452] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.441337] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    0.441388] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.441474] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    0.441963] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.442230] TCP: Hash tables configured (established 131072 bind 65536)
[    0.442491] MPTCP token hash table entries: 16384 (order: 7, 393216 bytes, linear)
[    0.442616] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.442699] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[    0.442820] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    0.442834] NET: Registered PF_XDP protocol family
[    0.442846] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.442851] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.442854] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.442870] pci 0000:00:1c.0: bridge window [mem 0xfc000000-0xfc1fffff]: assigned
[    0.442874] pci 0000:00:1c.0: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]: assigned
[    0.442877] pci 0000:00:1c.0: bridge window [io  0x1000-0x1fff]: assigned
[    0.442881] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.442885] pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
[    0.442889] pci 0000:00:1c.0:   bridge window [mem 0xfc000000-0xfc1fffff]
[    0.442892] pci 0000:00:1c.0:   bridge window [mem 0xfc200000-0xfc3fffff 64bit pref]
[    0.442898] pci 0000:00:1c.3: PCI bridge to [bus 02]
[    0.442900] pci 0000:00:1c.3:   bridge window [io  0xe000-0xefff]
[    0.442904] pci 0000:00:1c.3:   bridge window [mem 0xfdd00000-0xfddfffff]
[    0.442907] pci 0000:00:1c.3:   bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.442913] pci 0000:00:1e.0: PCI bridge to [bus 03]
[    0.442917] pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xf7ffffff]
[    0.442924] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.442926] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.442928] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.442930] pci_bus 0000:00: resource 7 [mem 0xeff00000-0xfebfffff window]
[    0.442932] pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
[    0.442934] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfc1fffff]
[    0.442935] pci_bus 0000:01: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref]
[    0.442937] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.442939] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[    0.442941] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
[    0.442943] pci_bus 0000:03: resource 1 [mem 0xf0000000-0xf7ffffff]
[    0.442945] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
[    0.442947] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
[    0.442949] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000dffff window]
[    0.442951] pci_bus 0000:03: resource 7 [mem 0xeff00000-0xfebfffff window]
[    0.457794] pci 0000:00:1a.7: quirk_usb_early_handoff+0x0/0x750 took 14083 usecs
[    0.473761] pci 0000:00:1d.7: quirk_usb_early_handoff+0x0/0x750 took 15248 usecs
[    0.473791] PCI: CLS 4 bytes, default 64
[    0.473807] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.473808] software IO TLB: mapped [mem 0x00000000ebee0000-0x00000000efee0000] (64MB)
[    0.473924] Trying to unpack rootfs image as initramfs...
[    0.476427] Initialise system trusted keyrings
[    0.476448] Key type blacklist registered
[    0.476564] workingset: timestamp_bits=36 max_order=22 bucket_order=0
[    0.476575] zbud: loaded
[    0.476961] fuse: init (API version 7.41)
[    0.477264] integrity: Platform Keyring initialized
[    0.477273] integrity: Machine keyring initialized
[    0.500421] Key type asymmetric registered
[    0.500425] Asymmetric key parser 'x509' registered
[    0.633913] Freeing initrd memory: 16764K
[    0.641374] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.641463] io scheduler mq-deadline registered
[    0.643474] ledtrig-cpu: registered to indicate activity on CPUs
[    0.643522] pcieport 0000:00:1c.0: enabling device (0000 -> 0003)
[    0.643801] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.644516] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.645287] Linux agpgart interface v0.103
[    0.645904] i8042: PNP: No PS/2 controller found.
[    0.645906] i8042: Probing ports directly.
[    0.646023] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.646179] mousedev: PS/2 mouse device common for all mice
[    0.646222] rtc_cmos 00:01: RTC can wake from S4
[    0.646477] rtc_cmos 00:01: registered as rtc0
[    0.646502] rtc_cmos 00:01: setting system clock to 2026-04-13T16:33:17 UTC (1776097997)
[    0.646542] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.646650] intel_pstate: CPU model not supported
[    0.647160] NET: Registered PF_INET6 protocol family
[    0.652483] Segment Routing with IPv6
[    0.652497] In-situ OAM (IOAM) with IPv6
[    0.652524] mip6: Mobile IPv6
[    0.652528] NET: Registered PF_PACKET protocol family
[    0.652589] mpls_gso: MPLS GSO support
[    0.652857] microcode: Current revision: 0x00000a0e
[    0.652989] IPI shorthand broadcast: enabled
[    0.655643] sched_clock: Marking stable (648864491, 4773316)->(656394184, -2756377)
[    0.655851] registered taskstats version 1
[    0.655973] Loading compiled-in X.509 certificates
[    0.687075] Loaded X.509 cert 'Build time autogenerated kernel key: 596c7cb057635a90ef936824f87c79aca1b8e83b'
[    0.689913] Demotion targets for Node 0: null
[    0.690187] Key type .fscrypt registered
[    0.690189] Key type fscrypt-provisioning registered
[    0.713298] Key type encrypted registered
[    0.713312] AppArmor: AppArmor sha256 policy hashing enabled
[    0.713326] ima: No TPM chip found, activating TPM-bypass!
[    0.713328] ima: Allocated hash algorithm: sha256
[    0.713341] ima: No architecture policies found
[    0.713357] evm: Initialising EVM extended attributes:
[    0.713358] evm: security.selinux
[    0.713360] evm: security.SMACK64 (disabled)
[    0.713361] evm: security.SMACK64EXEC (disabled)
[    0.713362] evm: security.SMACK64TRANSMUTE (disabled)
[    0.713363] evm: security.SMACK64MMAP (disabled)
[    0.713364] evm: security.apparmor
[    0.713365] evm: security.ima
[    0.713366] evm: security.capability
[    0.713367] evm: HMAC attrs: 0x1
[    0.715741] RAS: Correctable Errors collector initialized.
[    0.720543] clk: Disabling unused clocks
[    0.720547] PM: genpd: Disabling unused power domains
[    0.725609] Freeing unused decrypted memory: 2028K
[    0.726605] Freeing unused kernel image (initmem) memory: 4156K
[    0.726761] Write protecting the kernel read-only data: 28672k
[    0.727144] Freeing unused kernel image (rodata/data gap) memory: 488K
[    0.776682] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.776715] x86/mm: Checking user space page tables
[    0.824078] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    0.824084] Run /init as init process
[    0.824085]   with arguments:
[    0.824087]     /init
[    0.824088]   with environment:
[    0.824089]     HOME=/
[    0.824091]     TERM=linux
[    1.031617] SCSI subsystem initialized
[    1.041161] ACPI: bus type USB registered
[    1.041204] usbcore: registered new interface driver usbfs
[    1.041216] usbcore: registered new interface driver hub
[    1.041236] usbcore: registered new device driver usb
[    1.063849] ehci-pci 0000:00:1a.7: EHCI Host Controller
[    1.063857] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    1.067787] ehci-pci 0000:00:1a.7: irq 18, io mem 0xfdfff000
[    1.076471] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    1.076529] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    1.076533] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.076535] usb usb1: Product: EHCI Host Controller
[    1.076537] usb usb1: Manufacturer: Linux 6.12.74+deb13+1-amd64 ehci_hcd
[    1.076539] usb usb1: SerialNumber: 0000:00:1a.7
[    1.076700] hub 1-0:1.0: USB hub found
[    1.076710] hub 1-0:1.0: 6 ports detected
[    1.076926] ehci-pci 0000:00:1d.7: EHCI Host Controller
[    1.076932] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    1.080845] ehci-pci 0000:00:1d.7: irq 23, io mem 0xfdffe000
[    1.082876] libata version 3.00 loaded.
[    1.092264] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    1.092331] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12
[    1.092336] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.092339] usb usb2: Product: EHCI Host Controller
[    1.092342] usb usb2: Manufacturer: Linux 6.12.74+deb13+1-amd64 ehci_hcd
[    1.092344] usb usb2: SerialNumber: 0000:00:1d.7
[    1.092498] hub 2-0:1.0: USB hub found
[    1.092507] hub 2-0:1.0: 6 ports detected
[    1.104809] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    1.104820] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.104827] uhci_hcd 0000:00:1a.0: detected 2 ports
[    1.104857] uhci_hcd 0000:00:1a.0: irq 16, io port 0x0000ff00
[    1.104929] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[    1.104933] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.104935] usb usb3: Product: UHCI Host Controller
[    1.104937] usb usb3: Manufacturer: Linux 6.12.74+deb13+1-amd64 uhci_hcd
[    1.104938] usb usb3: SerialNumber: 0000:00:1a.0
[    1.105095] hub 3-0:1.0: USB hub found
[    1.105104] hub 3-0:1.0: 2 ports detected
[    1.105369] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    1.105374] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    1.105380] uhci_hcd 0000:00:1a.1: detected 2 ports
[    1.105405] uhci_hcd 0000:00:1a.1: irq 21, io port 0x0000fe00
[    1.105467] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[    1.105470] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.105472] usb usb4: Product: UHCI Host Controller
[    1.105474] usb usb4: Manufacturer: Linux 6.12.74+deb13+1-amd64 uhci_hcd
[    1.105476] usb usb4: SerialNumber: 0000:00:1a.1
[    1.105616] hub 4-0:1.0: USB hub found
[    1.105625] hub 4-0:1.0: 2 ports detected
[    1.105843] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[    1.105852] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[    1.105858] uhci_hcd 0000:00:1a.2: detected 2 ports
[    1.105880] uhci_hcd 0000:00:1a.2: irq 18, io port 0x0000fd00
[    1.105932] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[    1.105935] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.105937] usb usb5: Product: UHCI Host Controller
[    1.105939] usb usb5: Manufacturer: Linux 6.12.74+deb13+1-amd64 uhci_hcd
[    1.105941] usb usb5: SerialNumber: 0000:00:1a.2
[    1.106070] hub 5-0:1.0: USB hub found
[    1.106079] hub 5-0:1.0: 2 ports detected
[    1.106287] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    1.106292] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[    1.106298] uhci_hcd 0000:00:1d.0: detected 2 ports
[    1.106319] uhci_hcd 0000:00:1d.0: irq 23, io port 0x0000fc00
[    1.106372] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[    1.106375] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.106377] usb usb6: Product: UHCI Host Controller
[    1.106379] usb usb6: Manufacturer: Linux 6.12.74+deb13+1-amd64 uhci_hcd
[    1.106381] usb usb6: SerialNumber: 0000:00:1d.0
[    1.106517] hub 6-0:1.0: USB hub found
[    1.106525] hub 6-0:1.0: 2 ports detected
[    1.106746] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    1.106752] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[    1.106758] uhci_hcd 0000:00:1d.1: detected 2 ports
[    1.106782] uhci_hcd 0000:00:1d.1: irq 19, io port 0x0000fb00
[    1.106834] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[    1.106838] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.106840] usb usb7: Product: UHCI Host Controller
[    1.106841] usb usb7: Manufacturer: Linux 6.12.74+deb13+1-amd64 uhci_hcd
[    1.106843] usb usb7: SerialNumber: 0000:00:1d.1
[    1.106979] hub 7-0:1.0: USB hub found
[    1.106987] hub 7-0:1.0: 2 ports detected
[    1.107187] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    1.107193] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[    1.107198] uhci_hcd 0000:00:1d.2: detected 2 ports
[    1.107219] uhci_hcd 0000:00:1d.2: irq 18, io port 0x0000fa00
[    1.107280] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.12
[    1.107283] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.107285] usb usb8: Product: UHCI Host Controller
[    1.107287] usb usb8: Manufacturer: Linux 6.12.74+deb13+1-amd64 uhci_hcd
[    1.107288] usb usb8: SerialNumber: 0000:00:1d.2
[    1.107418] hub 8-0:1.0: USB hub found
[    1.107426] hub 8-0:1.0: 2 ports detected
[    1.116143] ahci 0000:00:1f.2: version 3.0
[    1.116227] ahci 0000:00:1f.2: controller can't do SNTF, turning off CAP_SNTF
[    1.116301] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.116332] ahci 0000:00:1f.2: AHCI vers 0001.0200, 32 command slots, 3 Gbps, RAID mode
[    1.116335] ahci 0000:00:1f.2: 6/6 ports implemented (port mask 0x3f)
[    1.116337] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pmp pio slum part ccc ems 
[    1.158655] scsi host0: ahci
[    1.158938] scsi host1: ahci
[    1.159120] scsi host2: ahci
[    1.159310] scsi host3: ahci
[    1.159530] scsi host4: ahci
[    1.159804] scsi host5: ahci
[    1.159877] ata1: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd100 irq 24 lpm-pol 0
[    1.159881] ata2: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd180 irq 24 lpm-pol 0
[    1.159883] ata3: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd200 irq 24 lpm-pol 0
[    1.159885] ata4: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd280 irq 24 lpm-pol 0
[    1.159887] ata5: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd300 irq 24 lpm-pol 0
[    1.159889] ata6: SATA max UDMA/133 abar m2048@0xfdffd000 port 0xfdffd380 irq 24 lpm-pol 0
[    1.324785] usb 1-6: new high-speed USB device number 2 using ehci-pci
[    1.468787] usb 6-1: new low-speed USB device number 2 using uhci_hcd
[    1.471446] usb 1-6: New USB device found, idVendor=19d2, idProduct=0016, bcdDevice= 0.00
[    1.471451] usb 1-6: New USB device strings: Mfr=3, Product=2, SerialNumber=0
[    1.471455] usb 1-6: Product: MTS WCDMA Technologies MSM
[    1.471457] usb 1-6: Manufacturer: Mobile Telesystems OJSC
[    1.500788] tsc: Refined TSC clocksource calibration: 2833.010 MHz
[    1.500798] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x28d61000994, max_idle_ns: 440795211167 ns
[    1.500823] clocksource: Switched to clocksource tsc
[    1.628789] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.629596] ata1.00: ATA-8: WDC WD5003ABYX-50WERA1, 01.01S03, max UDMA/133
[    1.630841] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    1.631730] ata1.00: configured for UDMA/133
[    1.631844] scsi 0:0:0:0: Direct-Access     ATA      WDC WD5003ABYX-5 1S03 PQ: 0 ANSI: 5
[    1.654798] usb 6-1: New USB device found, idVendor=1c4f, idProduct=0002, bcdDevice= 1.10
[    1.654804] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.654807] usb 6-1: Product: USB Keyboard
[    1.654809] usb 6-1: Manufacturer: SIGMACHIP
[    1.683780] hid: raw HID events driver (C) Jiri Kosina
[    2.100791] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.101260] ata2.00: ATA-9: HGST HUH721010ALN604, LHGNW92C, max UDMA/133
[    2.113925] ata2.00: 2441609216 sectors, multi 0: LBA48 NCQ (depth 32), AA
[    2.113930] ata2.00: Features: NCQ-sndrcv NCQ-prio
[    2.126971] ata2.00: configured for UDMA/133
[    2.127090] scsi 1:0:0:0: Direct-Access     ATA      HGST HUH721010AL W92C PQ: 0 ANSI: 5
[    2.272787] usb 8-2: new full-speed USB device number 2 using uhci_hcd
[    2.434896] ata3: SATA link down (SStatus 0 SControl 300)
[    2.650806] usb 8-2: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice=81.34
[    2.650812] usb 8-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.650815] usb 8-2: Product: USB Serial
[    2.742971] ata4: SATA link down (SStatus 0 SControl 300)
[    3.050892] ata5: SATA link down (SStatus 0 SControl 300)
[    3.358893] ata6: SATA link down (SStatus 0 SControl 300)
[    3.378679] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    3.378699] sd 0:0:0:0: [sda] Write Protect is off
[    3.378702] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.378718] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.378749] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
[    3.378868] sd 1:0:0:0: [sdb] 2441609216 4096-byte logical blocks: (10.0 TB/9.10 TiB)
[    3.378881] sd 1:0:0:0: [sdb] Write Protect is off
[    3.378884] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    3.378901] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.378931] sd 1:0:0:0: [sdb] Preferred minimum I/O size 4096 bytes
[    3.397974] usbcore: registered new interface driver usbhid
[    3.397977] usbhid: USB HID core driver
[    3.406266]  sda: sda1
[    3.406356] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.415203]  sdb: sdb1 sdb2
[    3.415355] sd 1:0:0:0: [sdb] Attached SCSI disk
[    3.425308] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/0003:1C4F:0002.0001/input/input1
[    3.536973] hid-generic 0003:1C4F:0002.0001: input,hidraw0: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1/input0
[    3.537232] input: SIGMACHIP USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:1C4F:0002.0002/input/input2
[    3.596863] input: SIGMACHIP USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.1/0003:1C4F:0002.0002/input/input3
[    3.596947] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:1d.0-1/input1
[    3.669199] md/raid1:md127: active with 2 out of 2 mirrors
[    3.686233] md127: detected capacity change from 0 to 976506880
[    3.876784] raid6: sse2x4   gen() 11013 MB/s
[    3.944782] raid6: sse2x2   gen() 10655 MB/s
[    4.012782] raid6: sse2x1   gen()  9110 MB/s
[    4.012784] raid6: using algorithm sse2x4 gen() 11013 MB/s
[    4.080784] raid6: .... xor() 4956 MB/s, rmw enabled
[    4.080790] raid6: using ssse3x2 recovery algorithm
[    4.087153] async_tx: api initialized (async)
[    4.093842] xor: measuring software checksum speed
[    4.094059]    prefetch64-sse  : 15293 MB/sec
[    4.094313]    generic_sse     : 13062 MB/sec
[    4.094314] xor: using function: prefetch64-sse (15293 MB/sec)
[    4.620372] EXT4-fs (md127): mounted filesystem 6d057775-1872-424c-857d-a9956029d8b0 ro with ordered data mode. Quota mode: none.
[    4.777196] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[    5.600292] systemd[1]: Inserted module 'autofs4'
[    5.728394] systemd[1]: systemd 257.9-1~deb13u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +IPE +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF -XKBCOMMON -UTMP +SYSVINIT +LIBARCHIVE)
[    5.728402] systemd[1]: Detected architecture x86-64.
[    5.760461] systemd[1]: Hostname set to <srv>.
[    5.843470] random: crng init done
[    5.986437] systemd[1]: bpf-restrict-fs: LSM BPF program attached
[    7.094053] systemd[1]: Queued start job for default target graphical.target.
[    7.165998] systemd[1]: Created slice machine.slice - Virtual Machine and Container Slice.
[    7.167161] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[    7.167668] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    7.168176] systemd[1]: Created slice system-nut\x2ddriver.slice - Slice /system/nut-driver.
[    7.168688] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
[    7.169073] systemd[1]: Created slice user.slice - User and Session Slice.
[    7.169159] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[    7.169229] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    7.169451] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    7.169481] systemd[1]: Expecting device dev-disk-by\x2duuid-62d368bf\x2d3189\x2d453a\x2d9474\x2d9ba054bb56c7.device - /dev/disk/by-uuid/62d368bf-3189-453a-9474-9ba054bb56c7...
[    7.169500] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[    7.169526] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    7.169576] systemd[1]: Reached target slices.target - Slice Units.
[    7.169604] systemd[1]: Reached target swap.target - Swaps.
[    7.169638] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[    7.169661] systemd[1]: Reached target virt-guest-shutdown.target - libvirt guests shutdown target.
[    7.169765] systemd[1]: Listening on dm-event.socket - Device-mapper event daemon FIFOs.
[    7.169881] systemd[1]: Listening on lvm2-lvmpolld.socket - LVM2 poll daemon socket.
[    7.171063] systemd[1]: Listening on systemd-creds.socket - Credential Encryption/Decryption.
[    7.171162] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[    7.171284] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[    7.171404] systemd[1]: Listening on systemd-journald.socket - Journal Sockets.
[    7.171442] systemd[1]: systemd-pcrextend.socket - TPM PCR Measurements was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    7.171464] systemd[1]: systemd-pcrlock.socket - Make TPM PCR Policy was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    7.171564] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[    7.171642] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[    7.191641] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[    7.192557] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[    7.193566] systemd[1]: Mounting run-lock.mount - Legacy Locks Directory /run/lock...
[    7.196940] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[    7.198073] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[    7.203495] systemd[1]: Mounting tmp.mount - Temporary Directory /tmp...
[    7.212781] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[    7.213881] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[    7.214909] systemd[1]: Starting lvm2-monitor.service - Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[    7.218757] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[    7.223869] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
[    7.270302] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[    7.271475] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[    7.271612] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[    7.271659] systemd[1]: systemd-hibernate-clear.service - Clear Stale Hibernate Storage Info was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67).
[    7.273799] systemd[1]: Starting systemd-journald.service - Journal Service...
[    7.276965] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[    7.276999] systemd[1]: systemd-pcrmachine.service - TPM PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    7.281487] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[    7.281559] systemd[1]: systemd-tpm2-setup-early.service - Early TPM SRK Setup was skipped because of an unmet condition check (ConditionSecurity=measured-uki).
[    7.284990] systemd[1]: Starting systemd-udev-load-credentials.service - Load udev Rules from Credentials...
[    7.289000] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[    7.299093] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[    7.299384] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[    7.300689] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[    7.301602] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[    7.302803] systemd[1]: Starting systemd-tmpfiles-setup-dev-early.service - Create Static Device Nodes in /dev gracefully...
[    7.349455] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[    7.349731] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[    7.384341] it87: Found IT8718F chip at 0x290, revision 8
[    7.384356] it87: VID is disabled (pins used for GPIO)
[    7.384365] it87: Beeping is supported
[    7.386009] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[    7.387298] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[    7.427004] systemd[1]: Finished systemd-udev-load-credentials.service - Load udev Rules from Credentials.
[    7.430459] systemd-journald[335]: Collecting audit messages is disabled.
[    7.437794] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[    7.438574] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[    7.438723] systemd[1]: Mounted run-lock.mount - Legacy Locks Directory /run/lock.
[    7.438860] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[    7.438996] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[    7.439132] systemd[1]: Mounted tmp.mount - Temporary Directory /tmp.
[    7.439292] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
[    7.454050] ACPI: bus type drm_connector registered
[    7.455172] systemd[1]: modprobe@drm.service: Deactivated successfully.
[    7.455468] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
[    7.521994] systemd[1]: Started systemd-journald.service - Journal Service.
[    7.661609] EXT4-fs (md127): re-mounted 6d057775-1872-424c-857d-a9956029d8b0 r/w.
[    7.702349] systemd-journald[335]: Received client request to flush runtime journal.
[    8.123305] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[    8.123348] device-mapper: uevent: version 1.0.3
[    8.123437] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev
[    8.832830] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    8.862455] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x000000000000042C-0x000000000000042D (\GP2C) (20240827/utaddress-204)
[    8.862464] ACPI: OSL: Resource conflict; ACPI support missing from driver?
[    8.862499] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    8.894965] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
[    8.895063] ACPI: button: Power Button [PWRB]
[    8.895150] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[    8.912831] ACPI: button: Power Button [PWRF]
[    8.954372] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    8.994282] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.994322] sd 1:0:0:0: Attached scsi generic sg1 type 0
[    9.141819] iTCO_vendor_support: vendor-support=0
[    9.144943] usbcore: registered new interface driver usbserial_generic
[    9.144957] usbserial: USB Serial support registered for generic
[    9.156044] iTCO_wdt iTCO_wdt.1.auto: Found a ICH10R TCO device (Version=2, TCOBASE=0x0460)
[    9.156237] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[    9.165540] usbcore: registered new interface driver option
[    9.165555] usbserial: USB Serial support registered for GSM modem (1-port)
[    9.165624] option 1-6:1.0: GSM modem (1-port) converter detected
[    9.165931] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB0
[    9.165979] option 1-6:1.1: GSM modem (1-port) converter detected
[    9.166053] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB1
[    9.166213] option 1-6:1.2: GSM modem (1-port) converter detected
[    9.166276] usb 1-6: GSM modem (1-port) converter now attached to ttyUSB2
[    9.168875] usbcore: registered new interface driver ch341
[    9.168890] usbserial: USB Serial support registered for ch341-uart
[    9.168904] ch341 8-2:1.0: ch341-uart converter detected
[    9.176887] usb 8-2: ch341-uart converter now attached to ttyUSB3
[    9.314555] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    9.319873] r8169 0000:02:00.0 eth0: RTL8168e/8111e, c0:25:e9:1e:ae:0c, XID 2c2, IRQ 25
[    9.319880] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[    9.367974] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    9.685180] intel_powerclamp: No package C-state available
[   10.463395] EXT4-fs (sdb1): mounted filesystem 62d368bf-3189-453a-9474-9ba054bb56c7 r/w with ordered data mode. Quota mode: none.
[   10.745669] audit: type=1400 audit(1776098007.594:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="Discord" pid=605 comm="apparmor_parser"
[   10.745708] audit: type=1400 audit(1776098007.594:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="1password" pid=604 comm="apparmor_parser"
[   10.753021] audit: type=1400 audit(1776098007.602:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name=4D6F6E676F444220436F6D70617373 pid=606 comm="apparmor_parser"
[   10.755926] audit: type=1400 audit(1776098007.602:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="QtWebEngineProcess" pid=607 comm="apparmor_parser"
[   10.766058] audit: type=1400 audit(1776098007.614:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="brave" pid=610 comm="apparmor_parser"
[   10.766063] audit: type=1400 audit(1776098007.614:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="balena-etcher" pid=609 comm="apparmor_parser"
[   10.766065] audit: type=1400 audit(1776098007.614:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="buildah" pid=611 comm="apparmor_parser"
[   10.769415] audit: type=1400 audit(1776098007.622:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="cam" pid=613 comm="apparmor_parser"
[   10.769655] audit: type=1400 audit(1776098007.622:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="busybox" pid=612 comm="apparmor_parser"
[   10.769916] audit: type=1400 audit(1776098007.622:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ch-checkns" pid=614 comm="apparmor_parser"
[   11.325367] Process accounting resumed
[   12.380339] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[   12.405042] br0: port 1(enp2s0) entered blocking state
[   12.405051] br0: port 1(enp2s0) entered disabled state
[   12.405070] r8169 0000:02:00.0 enp2s0: entered allmulticast mode
[   12.405124] r8169 0000:02:00.0 enp2s0: entered promiscuous mode
[   12.701895] RTL8211DN Gigabit Ethernet r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
[   12.958975] r8169 0000:02:00.0 enp2s0: Link is Down
[   12.959592] br0: port 1(enp2s0) entered blocking state
[   12.959600] br0: port 1(enp2s0) entered forwarding state
[   13.402337] br0: port 1(enp2s0) entered disabled state
[   14.965207] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control rx/tx
[   14.965254] br0: port 1(enp2s0) entered blocking state
[   14.965260] br0: port 1(enp2s0) entered forwarding state
[   18.222927] r8169 0000:02:00.0 enp2s0: Link is Down
[   18.223034] br0: port 1(enp2s0) entered disabled state
[   21.187696] r8169 0000:02:00.0 enp2s0: Link is Up - 1Gbps/Full - flow control off
[   21.187718] br0: port 1(enp2s0) entered blocking state
[   21.187725] br0: port 1(enp2s0) entered forwarding state
[   23.368390] r8169 0000:02:00.0: invalid VPD tag 0xb9 (size 39018) at offset 26691
[   26.520993] kauditd_printk_skb: 105 callbacks suppressed
[   26.521006] audit: type=1400 audit(1776098023.370:117): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139" pid=1806 comm="apparmor_parser"
[   26.522494] audit: type=1400 audit(1776098023.370:118): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139//passt" pid=1806 comm="apparmor_parser"
[   27.586652] audit: type=1400 audit(1776098024.434:119): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139" pid=1810 comm="apparmor_parser"
[   27.630283] audit: type=1400 audit(1776098024.478:120): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139//passt" pid=1810 comm="apparmor_parser"
[   27.793665] audit: type=1400 audit(1776098024.642:121): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139" pid=1816 comm="apparmor_parser"
[   27.830797] audit: type=1400 audit(1776098024.678:122): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139//passt" pid=1816 comm="apparmor_parser"
[   28.014942] audit: type=1400 audit(1776098024.862:123): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139" pid=1821 comm="apparmor_parser"
[   28.030438] audit: type=1400 audit(1776098024.878:124): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139//passt" pid=1821 comm="apparmor_parser"
[   28.240912] audit: type=1400 audit(1776098025.090:125): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139" pid=1832 comm="apparmor_parser"
[   28.242359] audit: type=1400 audit(1776098025.090:126): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139//passt" pid=1832 comm="apparmor_parser"
[   30.685943] tun: Universal TUN/TAP device driver, 1.6
[   30.688162] br0: port 2(vnet0) entered blocking state
[   30.688170] br0: port 2(vnet0) entered disabled state
[   30.688177] vnet0: entered allmulticast mode
[   30.688228] vnet0: entered promiscuous mode
[   30.688326] br0: port 2(vnet0) entered blocking state
[   30.688333] br0: port 2(vnet0) entered forwarding state
[   32.117053] kauditd_printk_skb: 2 callbacks suppressed
[   32.117058] audit: type=1400 audit(1776098028.966:129): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139" pid=2069 comm="apparmor_parser"
[   32.146884] audit: type=1400 audit(1776098028.994:130): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="libvirt-f619b5ae-c4f1-4ed8-ba6e-4733b5aef139//passt" pid=2069 comm="apparmor_parser"

[-- Attachment #3: lspci.log --]
[-- Type: text/plain, Size: 1480 bytes --]

00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4
00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5
00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6
00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4
00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1
00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2
00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3
00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller
00:1f.2 RAID bus controller: Intel Corporation SATA Controller [RAID mode]
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet Controller (rev 06)
03:00.0 VGA compatible controller: S3 Graphics Ltd. 86c775/86c785 [Trio 64V2/DX or /GX] (rev 16)