From: heiko@sntech.de (Heiko Stübner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 13/14] ARM: dts: rockchip: move oscillator input clock into main dtsi
Date: Thu, 03 Jul 2014 02:03:46 +0200 [thread overview]
Message-ID: <1842584.5WA7NPD1Xp@diego> (raw)
In-Reply-To: <156042792.J76K6jxIGl@diego>
The clock definitions get a lot shorter due to the soc clocks being handled by
rk3188-cru and only the input clock remains. These can not simply live
in the main rk3xxx.dtsi without affecting readability.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-By: Max Schwarz <max.schwarz@online.de>
Tested-By: Max Schwarz <max.schwarz@online.de>
---
arch/arm/boot/dts/rk3066a-clocks.dtsi | 6 ------
arch/arm/boot/dts/rk3188-clocks.dtsi | 6 ------
arch/arm/boot/dts/rk3xxx.dtsi | 6 ++++++
3 files changed, 6 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/rk3066a-clocks.dtsi b/arch/arm/boot/dts/rk3066a-clocks.dtsi
index 6e307fc..0d4d667 100644
--- a/arch/arm/boot/dts/rk3066a-clocks.dtsi
+++ b/arch/arm/boot/dts/rk3066a-clocks.dtsi
@@ -31,12 +31,6 @@
#clock-cells = <0>;
};
- xin24m: xin24m {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- #clock-cells = <0>;
- };
-
dummy48m: dummy48m {
compatible = "fixed-clock";
clock-frequency = <48000000>;
diff --git a/arch/arm/boot/dts/rk3188-clocks.dtsi b/arch/arm/boot/dts/rk3188-clocks.dtsi
index b1b92dc..6bc0373 100644
--- a/arch/arm/boot/dts/rk3188-clocks.dtsi
+++ b/arch/arm/boot/dts/rk3188-clocks.dtsi
@@ -31,12 +31,6 @@
#clock-cells = <0>;
};
- xin24m: xin24m {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- #clock-cells = <0>;
- };
-
dummy48m: dummy48m {
compatible = "fixed-clock";
clock-frequency = <48000000>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index b47d5fe..0de3f06 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -26,6 +26,12 @@
compatible = "simple-bus";
ranges;
+ xin24m: xin24m {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
scu at 1013c000 {
compatible = "arm,cortex-a9-scu";
reg = <0x1013c000 0x100>;
--
1.9.0
next prev parent reply other threads:[~2014-07-03 0:03 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-02 23:53 [PATCH v5 00/14] Clock support for rk3066,rk3188 and rk3288 Heiko Stübner
2014-07-02 23:56 ` [PATCH v5 01/14] clk: composite: support determine_rate using rate_ops->round_rate + mux_ops->set_parent Heiko Stübner
2014-07-18 13:55 ` Gabriel Fernandez
2014-07-18 16:00 ` Heiko Stübner
2014-07-02 23:57 ` [PATCH v5 02/14] clk: composite: allow read-only clocks Heiko Stübner
2014-07-02 23:58 ` [PATCH v5 03/14] clk: composite: improve rate_hw sanity check logic Heiko Stübner
2014-07-02 23:58 ` [PATCH v5 04/14] clk: rockchip: add basic infrastructure for clock branches Heiko Stübner
2014-07-02 23:59 ` [PATCH v5 05/14] clk: rockchip: add clock type for pll clocks and pll used on rk3066 Heiko Stübner
2014-07-02 23:59 ` [PATCH v5 06/14] clk: rockchip: add reset controller Heiko Stübner
2014-07-03 0:00 ` [PATCH v5 07/14] dt-bindings: add documentation for rk3188 clock and reset unit Heiko Stübner
2014-07-03 0:00 ` Heiko Stübner
2014-07-03 0:01 ` [PATCH v5 08/14] clk: rockchip: add clock driver for rk3188 and rk3066 clocks Heiko Stübner
2014-07-03 0:02 ` [PATCH v5 09/14] dt-bindings: add documentation for rk3288 cru Heiko Stübner
2014-07-03 0:02 ` Heiko Stübner
2014-07-03 0:02 ` [PATCH v5 10/14] clk: rockchip: add clock controller for rk3288 Heiko Stübner
2014-07-03 0:02 ` [PATCH v5 11/14] ARM: rockchip: Select ARCH_HAS_RESET_CONTROLLER Heiko Stübner
2014-07-03 0:03 ` [PATCH v5 12/14] ARM: dts: rockchip: add cru nodes and update device clocks to use it Heiko Stübner
2014-07-03 0:03 ` Heiko Stübner [this message]
2014-07-03 0:04 ` [PATCH v5 14/14] arm: dts: rockchip: remove obsolete clock gate definitions Heiko Stübner
2014-07-13 19:46 ` [PATCH v5 00/14] Clock support for rk3066,rk3188 and rk3288 Mike Turquette
2014-07-14 3:12 ` Olof Johansson
2014-07-14 8:07 ` Heiko Stübner
2014-07-22 15:45 ` Heiko Stübner
2014-07-24 2:44 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1842584.5WA7NPD1Xp@diego \
--to=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.