From: "Heiko Stübner" <heiko@sntech.de>
To: Luis Ortega <luiorpe1@upv.es>
Cc: dmitry.torokhov@gmail.com, yongjun_wei@trendmicro.com.cn,
linux-input@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 2/4] Input: zforce - fix lines exceeding 80 columns
Date: Mon, 27 Jan 2014 20:12:48 +0100 [thread overview]
Message-ID: <1864335.qYXGSfrppl@phil> (raw)
In-Reply-To: <1390848373-7723-3-git-send-email-luiorpe1@upv.es>
On Monday, 27. January 2014 19:46:11 Luis Ortega wrote:
> Fixed lines exceeding 80 characters long wherever possible,
> as per the coding style.
>
> Signed-off-by: Luis Ortega <luiorpe1@upv.es>
checkpatch did not complain on the initial submission, so I guess it's more an
issue of taste. Nevertheless I don't have a preference for one way or the
other, so
Acked-by: Heiko Stuebner <heiko@sntech.de>
> ---
> drivers/input/touchscreen/zforce_ts.c | 19 ++++++++++++-------
> 1 file changed, 12 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/input/touchscreen/zforce_ts.c
> b/drivers/input/touchscreen/zforce_ts.c index c145c1d..c1b6b82 100644
> --- a/drivers/input/touchscreen/zforce_ts.c
> +++ b/drivers/input/touchscreen/zforce_ts.c
> @@ -235,7 +235,8 @@ static int zforce_scan_frequency(struct zforce_ts *ts,
> u16 idle, u16 finger, (finger & 0xff), ((finger >> 8) & 0xff),
> (stylus & 0xff), ((stylus >> 8) & 0xff) };
>
> - dev_dbg(&client->dev, "set scan frequency to (idle: %d, finger: %d,
> stylus: %d)\n", + dev_dbg(&client->dev,
> + "set scan frequency to (idle: %d, finger: %d, stylus: %d)\n",
> idle, finger, stylus);
>
> return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
> @@ -332,7 +333,8 @@ static int zforce_touch_event(struct zforce_ts *ts, u8
> *payload)
>
> count = payload[0];
> if (count > ZFORCE_REPORT_POINTS) {
> - dev_warn(&client->dev, "too many coordinates %d, expected max %d\n",
> + dev_warn(&client->dev,
> + "too many coordinates %d, expected max %d\n",
> count, ZFORCE_REPORT_POINTS);
> count = ZFORCE_REPORT_POINTS;
> }
> @@ -494,8 +496,8 @@ static irqreturn_t zforce_irq_thread(int irq, void
> *dev_id) while (!gpio_get_value(pdata->gpio_int)) {
> ret = zforce_read_packet(ts, payload_buffer);
> if (ret < 0) {
> - dev_err(&client->dev, "could not read packet, ret: %d\n",
> - ret);
> + dev_err(&client->dev,
> + "could not read packet, ret: %d\n", ret);
> break;
> }
>
> @@ -539,7 +541,8 @@ static irqreturn_t zforce_irq_thread(int irq, void
> *dev_id) payload[RESPONSE_DATA + 4];
> ts->version_rev = (payload[RESPONSE_DATA + 7] << 8) |
> payload[RESPONSE_DATA + 6];
> - dev_dbg(&ts->client->dev, "Firmware Version %04x:%04x %04x:
%04x\n",
> + dev_dbg(&ts->client->dev,
> + "Firmware Version %04x:%04x %04x:%04x\n",
> ts->version_major, ts->version_minor,
> ts->version_build, ts->version_rev);
>
> @@ -552,7 +555,8 @@ static irqreturn_t zforce_irq_thread(int irq, void
> *dev_id) break;
>
> default:
> - dev_err(&ts->client->dev, "unrecognized response id: 0x%x\n",
> + dev_err(&ts->client->dev,
> + "unrecognized response id: 0x%x\n",
> payload[RESPONSE_ID]);
> break;
> }
> @@ -618,7 +622,8 @@ static int zforce_suspend(struct device *dev)
>
> enable_irq_wake(client->irq);
> } else if (input->users) {
> - dev_dbg(&client->dev, "suspend without being a wakeup source\n");
> + dev_dbg(&client->dev,
> + "suspend without being a wakeup source\n");
>
> ret = zforce_stop(ts);
> if (ret)
next prev parent reply other threads:[~2014-01-27 19:13 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-27 18:46 Input: zforce - fix various small issues Luis Ortega
2014-01-27 18:46 ` [PATCH 1/4] Input: zforce - fix spelling errors Luis Ortega
2014-01-27 18:41 ` Heiko Stübner
2014-01-27 18:46 ` [PATCH 2/4] Input: zforce - fix lines exceeding 80 columns Luis Ortega
2014-01-27 19:12 ` Heiko Stübner [this message]
2014-01-27 19:29 ` Luis Ortega
2014-01-27 19:29 ` Luis Ortega
2014-01-27 18:46 ` [PATCH 3/4] Input: zforce - Remove unnecessary payload data checks Luis Ortega
2014-01-27 20:16 ` Heiko Stübner
2014-01-27 18:46 ` [PATCH 4/4] Input: zforce - reduce stack memory allocated to frames Luis Ortega
2014-01-27 20:22 ` Heiko Stübner
2014-01-28 6:44 ` Input: zforce - fix various small issues Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1864335.qYXGSfrppl@phil \
--to=heiko@sntech.de \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiorpe1@upv.es \
--cc=yongjun_wei@trendmicro.com.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.