From: Misbah khan <misbah_khan@engineer.com>
To: linuxppc-embedded@ozlabs.org
Subject: facing problem with io_p2v() function
Date: Wed, 13 Aug 2008 08:31:28 -0700 (PDT) [thread overview]
Message-ID: <18965524.post@talk.nabble.com> (raw)
Hi all,
I am using io_p2v() function in my driver to get the virtual address mapping
timer control registers
i am passing address as 0x48304024 as base and after getting the virtual
address of it i am reading and writing to it but my any attempt to read the
location or write is giving segmentation fault
If i use __pa() to read the corresponding location it returning as
0x98304024 insted of 0x48304024
I dont know where the mapping is going wrong
Even when i tried using ioremap() i got the same kernel panic
Below is the error message
-------------------------------------------------------------------------------------------------------
In init function
Read reg address virt 0xd8304024 and phy 0x98304024 are
Unhandled fault: external abort on non-linefetch (0x1028) at 0xd8304024
Internal error: : 1028 [#1]
Modules linked in: omap_timer
CPU: 0 Not tainted (2.6.22.1-omap3 #1)
PC is at omap_timer_read_register+0x30/0x3c [omap_timer]
LR is at release_console_sem+0x1c0/0x1d4
pc : [<bf000160>] lr : [<c005f650>] psr: 60000013
sp : c7f1bea0 ip : c7f1bdd8 fp : c7f1beb4
r10: c8858000 r9 : 00000026 r8 : 00000027
r7 : c06dfdf0 r6 : 00000000 r5 : bf001018 r4 : 00000024
r3 : d8304000 r2 : 00000000 r1 : 60000013 r0 : 0000003d
Flags: nZCv IRQs on FIQs on Mode SVC_32 Segment user
Control: 00c5387f Table: 80694018 DAC: 00000015
Process insmod (pid: 306, stack limit = 0xc7f1a2d0)
Stack: (0xc7f1bea0 to 0xc7f1c000)
bea0: 00000000 bf001018 c7f1bed4 c7f1beb8 bf0001c4 bf00013c 00000000
bf001280
bec0: bf001100 c06dfdf0 c7f1bef4 c7f1bed8 bf0030c4 bf0001b0 00000000
c006b5c4
bee0: c06dfdc4 c06dfc00 c7f1bfa4 c7f1bef8 c007f514 bf00300c 00000000
c0024380
bf00: 000ce008 00000000 00000000 00000000 00000000 00000000 00000000
00000000
bf20: 00000000 00000000 00000000 00000000 00000000 00000000 c886ca30
c07fc200
bf40: 00000000 c8867c88 c88678f0 00000000 00000054 00000054 0000000a
c886758f
bf60: c8867cd8 bf00110c c8867cb0 00000024 00000000 c035da98 c0030184
000a81fc
bf80: bebf5d74 00014cdd 00000080 c0029f68 c7f1a000 00000000 00000000
c7f1bfa8
bfa0: c0029dc0 c007e1d8 000a81fc bebf5d74 000ce018 00014cdd 000ce008
00000001
bfc0: 000a81fc bebf5d74 00014cdd 00000080 00000000 bebf5d74 bebf5e54
00000061
bfe0: bebf5a20 bebf5a10 0001e1c0 401d2ec0 60000010 000ce018 00000017
0011b8d8
Backtrace:
[<bf000130>] (omap_timer_read_register+0x0/0x3c [omap_timer]) from
[<bf0001c4>] (omap_dm_timer_set_l
oad+0x20/0x5c [omap_timer])
r5:bf001018 r4:00000000
[<bf0001a4>] (omap_dm_timer_set_load+0x0/0x5c [omap_timer]) from
[<bf0030c4>] (omap_gp_timer_init_mo
de+0xc4/0xf0 [omap_timer])
r7:c06dfdf0 r6:bf001100 r5:bf001280 r4:00000000
[<bf003000>] (omap_gp_timer_init_mode+0x0/0xf0 [omap_timer]) from
[<c007f514>] (sys_init_module+0x13
48/0x1400)
r5:c06dfc00 r4:c06dfdc4
[<c007e1cc>] (sys_init_module+0x0/0x1400) from [<c0029dc0>]
(ret_fast_syscall+0x0/0x2c)
Code: e1a01003 e59f000c eb417e8b e5953010 (e7930004)
Segmentation fault
-----------------------------------------------------------------------------------------------------------
Looking forward for the suggestion for the above problem
----- Misbah <><
--
View this message in context: http://www.nabble.com/facing-problem-with-io_p2v%28%29-function-tp18965524p18965524.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.
next reply other threads:[~2008-08-13 15:31 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-13 15:31 Misbah khan [this message]
2008-08-20 23:47 ` facing problem with io_p2v() function Sergey Temerkhanov
2008-08-21 20:00 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=18965524.post@talk.nabble.com \
--to=misbah_khan@engineer.com \
--cc=linuxppc-embedded@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.