All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tomasz Figa <t.figa@samsung.com>
To: Kukjin Kim <kgene.kim@samsung.com>
Cc: linux-samsung-soc@vger.kernel.org,
	Thomas Abraham <thomas.ab@samsung.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Grant Likely <grant.likely@secretlab.ca>,
	devicetree-discuss@lists.ozlabs.org
Subject: Re: [PATCH 2/2] ARM: dts: fix compatible value for exynos pinctrl
Date: Thu, 17 Jan 2013 12:06:41 +0100	[thread overview]
Message-ID: <1908436.ajLE5xdWgK@amdc1227> (raw)
In-Reply-To: <1357172423-8217-2-git-send-email-kgene.kim@samsung.com>

Hi Kukjin,

On Wednesday 02 of January 2013 16:20:23 Kukjin Kim wrote:
> Fix the incorrect compatible property value of pinctrl for EXYNOS4 SoCs.
> 
> Cc: Thomas Abraham <thomas.ab@samsung.com>
> Cc: Linus Walleij <linus.walleij@linaro.org>
> Cc: Grant Likely <grant.likely@secretlab.ca>
> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
> Cc: devicetree-discuss@lists.ozlabs.org
> ---
>  .../devicetree/bindings/pinctrl/samsung-pinctrl.txt        |   12
> ++++++------ arch/arm/boot/dts/exynos4210.dtsi                         
> |    6 +++--- arch/arm/boot/dts/exynos4x12.dtsi                        
>  |    8 ++++---- arch/arm/mach-exynos/common.c                         
>     |    4 ++-- drivers/gpio/gpio-samsung.c                            
>    |    4 ++-- drivers/pinctrl/pinctrl-samsung.c                       
>   |    4 ++-- 6 files changed, 19 insertions(+), 19 deletions(-)
> 
> diff --git
> a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index
> e97a278..4598a47 100644
> --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt
> @@ -7,9 +7,9 @@ on-chip controllers onto these pads.
> 
>  Required Properties:
>  - compatible: should be one of the following.
> -  - "samsung,pinctrl-exynos4210": for Exynos4210 compatible
> pin-controller. -  - "samsung,pinctrl-exynos4x12": for Exynos4x12
> compatible pin-controller. -  - "samsung,pinctrl-exynos5250": for
> Exynos5250 compatible pin-controller. +  -
> "samsung,exynos4210-pinctrl": for Exynos4210 compatible pin-controller.
> +  - "samsung,exynos4x12-pinctrl": for Exynos4x12 compatible
> pin-controller. +  - "samsung,exynos5250-pinctrl": for Exynos5250
> compatible pin-controller.
> 
>  - reg: Base address of the pin controller hardware module and length of
> the address space it occupies.
> @@ -142,7 +142,7 @@ the following format 'pinctrl{n}' where n is a
> unique number for the alias. Example: A pin-controller node with pin
> banks:
> 
>  	pinctrl_0: pinctrl@11400000 {
> -		compatible = "samsung,pinctrl-exynos4210";
> +		compatible = "samsung,exynos4210-pinctrl";
>  		reg = <0x11400000 0x1000>;
>  		interrupts = <0 47 0>;
> 
> @@ -185,7 +185,7 @@ Example: A pin-controller node with pin banks:
>  Example 1: A pin-controller node with pin groups.
> 
>  	pinctrl_0: pinctrl@11400000 {
> -		compatible = "samsung,pinctrl-exynos4210";
> +		compatible = "samsung,exynos4210-pinctrl";
>  		reg = <0x11400000 0x1000>;
>  		interrupts = <0 47 0>;
> 
> @@ -230,7 +230,7 @@ Example 1: A pin-controller node with pin groups.
>  Example 2: A pin-controller node with external wakeup interrupt
> controller node.
> 
>  	pinctrl_1: pinctrl@11000000 {
> -		compatible = "samsung,pinctrl-exynos4210";
> +		compatible = "samsung,exynos4210-pinctrl";
>  		reg = <0x11000000 0x1000>;
>  		interrupts = <0 46 0>
> 
> diff --git a/arch/arm/boot/dts/exynos4210.dtsi
> b/arch/arm/boot/dts/exynos4210.dtsi index e31bfc4..2feffc7 100644
> --- a/arch/arm/boot/dts/exynos4210.dtsi
> +++ b/arch/arm/boot/dts/exynos4210.dtsi
> @@ -48,13 +48,13 @@
>  	};
> 
>  	pinctrl_0: pinctrl@11400000 {
> -		compatible = "samsung,pinctrl-exynos4210";
> +		compatible = "samsung,exynos4210-pinctrl";
>  		reg = <0x11400000 0x1000>;
>  		interrupts = <0 47 0>;
>  	};
> 
>  	pinctrl_1: pinctrl@11000000 {
> -		compatible = "samsung,pinctrl-exynos4210";
> +		compatible = "samsung,exynos4210-pinctrl";
>  		reg = <0x11000000 0x1000>;
>  		interrupts = <0 46 0>;
> 
> @@ -66,7 +66,7 @@
>  	};
> 
>  	pinctrl_2: pinctrl@03860000 {
> -		compatible = "samsung,pinctrl-exynos4210";
> +		compatible = "samsung,exynos4210-pinctrl";
>  		reg = <0x03860000 0x1000>;
>  	};
> 
> diff --git a/arch/arm/boot/dts/exynos4x12.dtsi
> b/arch/arm/boot/dts/exynos4x12.dtsi index 179a62e..9a87806 100644
> --- a/arch/arm/boot/dts/exynos4x12.dtsi
> +++ b/arch/arm/boot/dts/exynos4x12.dtsi
> @@ -37,13 +37,13 @@
>  	};
> 
>  	pinctrl_0: pinctrl@11400000 {
> -		compatible = "samsung,pinctrl-exynos4x12";
> +		compatible = "samsung,exynos4x12-pinctrl";
>  		reg = <0x11400000 0x1000>;
>  		interrupts = <0 47 0>;
>  	};
> 
>  	pinctrl_1: pinctrl@11000000 {
> -		compatible = "samsung,pinctrl-exynos4x12";
> +		compatible = "samsung,exynos4x12-pinctrl";
>  		reg = <0x11000000 0x1000>;
>  		interrupts = <0 46 0>;
> 
> @@ -55,14 +55,14 @@
>  	};
> 
>  	pinctrl_2: pinctrl@03860000 {
> -		compatible = "samsung,pinctrl-exynos4x12";
> +		compatible = "samsung,exynos4x12-pinctrl";
>  		reg = <0x03860000 0x1000>;
>  		interrupt-parent = <&combiner>;
>  		interrupts = <10 0>;
>  	};
> 
>  	pinctrl_3: pinctrl@106E0000 {
> -		compatible = "samsung,pinctrl-exynos4x12";
> +		compatible = "samsung,exynos4x12-pinctrl";
>  		reg = <0x106E0000 0x1000>;
>  		interrupts = <0 72 0>;
>  	};
> diff --git a/arch/arm/mach-exynos/common.c
> b/arch/arm/mach-exynos/common.c index d6d0dc6..3777a41 100644
> --- a/arch/arm/mach-exynos/common.c
> +++ b/arch/arm/mach-exynos/common.c
> @@ -1024,8 +1024,8 @@ static int __init exynos_init_irq_eint(void)
>  	 * interrupt support code here can be completely removed.
>  	 */
>  	static const struct of_device_id exynos_pinctrl_ids[] = {
> -		{ .compatible = "samsung,pinctrl-exynos4210", },
> -		{ .compatible = "samsung,pinctrl-exynos4x12", },
> +		{ .compatible = "samsung,exynos4210-pinctrl", },
> +		{ .compatible = "samsung,exynos4x12-pinctrl", },

Since you are around these arrays of of_device_id, could you also add the 
missing terminators?

There was a patch floating on the list some time ago, but it doesn't seem 
to be merged.

>  	};
>  	struct device_node *pctrl_np, *wkup_np;
>  	const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
> diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c
> index cac4b45..8c00f7d 100644
> --- a/drivers/gpio/gpio-samsung.c
> +++ b/drivers/gpio/gpio-samsung.c
> @@ -3024,8 +3024,8 @@ static __init int samsung_gpiolib_init(void)
>  	*/
>  	struct device_node *pctrl_np;
>  	static const struct of_device_id exynos_pinctrl_ids[] = {
> -		{ .compatible = "samsung,pinctrl-exynos4210", },
> -		{ .compatible = "samsung,pinctrl-exynos4x12", },
> +		{ .compatible = "samsung,exynos4210-pinctrl", },
> +		{ .compatible = "samsung,exynos4x12-pinctrl", },
>  		{ .compatible = "samsung,exynos5440-pinctrl", },

Also here.

Best regards,
-- 
Tomasz Figa
Samsung Poland R&D Center
SW Solution Development, Linux Platform

>  	};
>  	for_each_matching_node(pctrl_np, exynos_pinctrl_ids)
> diff --git a/drivers/pinctrl/pinctrl-samsung.c
> b/drivers/pinctrl/pinctrl-samsung.c index 864fed8..602b30b 100644
> --- a/drivers/pinctrl/pinctrl-samsung.c
> +++ b/drivers/pinctrl/pinctrl-samsung.c
> @@ -945,9 +945,9 @@ static int __devinit samsung_pinctrl_probe(struct
> platform_device *pdev) }
> 
>  static const struct of_device_id samsung_pinctrl_dt_match[] = {
> -	{ .compatible = "samsung,pinctrl-exynos4210",
> +	{ .compatible = "samsung,exynos4210-pinctrl",
>  		.data = (void *)exynos4210_pin_ctrl },
> -	{ .compatible = "samsung,pinctrl-exynos4x12",
> +	{ .compatible = "samsung,exynos4x12-pinctrl",
>  		.data = (void *)exynos4x12_pin_ctrl },
>  	{},
>  };

  parent reply	other threads:[~2013-01-17 11:06 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-01-03  0:20 [PATCH 1/2] ARM: dts: Fix compatible value of pinctrl module on EXYNOS5440 Kukjin Kim
2013-01-03  0:20 ` [PATCH 2/2] ARM: dts: fix compatible value for exynos pinctrl Kukjin Kim
2013-01-05 22:57   ` Olof Johansson
2013-01-10  1:34     ` Kukjin Kim
2013-01-17 10:16     ` Tomasz Figa
2013-01-17 11:06   ` Tomasz Figa [this message]
2013-01-17 14:03   ` Linus Walleij
     [not found] ` <1357172423-8217-1-git-send-email-kgene.kim-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2013-01-05 22:54   ` [PATCH 1/2] ARM: dts: Fix compatible value of pinctrl module on EXYNOS5440 Olof Johansson
2013-01-17  8:34 ` Linus Walleij
2013-01-17 16:39   ` Stephen Warren
2013-01-18  2:24   ` Rob Herring
2013-01-18  3:40     ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1908436.ajLE5xdWgK@amdc1227 \
    --to=t.figa@samsung.com \
    --cc=devicetree-discuss@lists.ozlabs.org \
    --cc=grant.likely@secretlab.ca \
    --cc=kgene.kim@samsung.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=thomas.ab@samsung.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.