All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: niklas.soderlund+renesas@ragnatech.se,
	kieran.bingham@ideasonboard.com, linux-media@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org
Subject: Re: [PATCH 4/5] media: adv748x: Store the TX sink in HDMI/AFE
Date: Thu, 13 Dec 2018 11:34:03 +0200	[thread overview]
Message-ID: <1922179.BUMsX2vHZM@avalon> (raw)
In-Reply-To: <1544541373-30044-5-git-send-email-jacopo+renesas@jmondi.org>

Hi Jacopo,

Thank you for the patch.

On Tuesday, 11 December 2018 17:16:12 EET Jacopo Mondi wrote:
> Both the AFE and HDMI s_stream routines (adv748x_afe_s_stream() and
> adv748x_hdmi_s_stream()) have to enable the CSI-2 TX they are streaming
> video data to.
> 
> With the introduction of dynamic routing between HDMI and AFE entities to
> TXA, the video stream sink needs to be set at run time, and not statically
> selected as the s_stream functions are currently doing.
> 
> To fix this, store a reference to the active CSI-2 TX sink for both HDMI and
> AFE sources, and operate on it when starting/stopping the stream.
> 
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> ---
>  drivers/media/i2c/adv748x/adv748x-afe.c  |  2 +-
>  drivers/media/i2c/adv748x/adv748x-csi2.c | 19 ++++++++++++++-----
>  drivers/media/i2c/adv748x/adv748x-hdmi.c |  2 +-
>  drivers/media/i2c/adv748x/adv748x.h      |  4 ++++
>  4 files changed, 20 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c
> b/drivers/media/i2c/adv748x/adv748x-afe.c index 71714634efb0..dbbb1e4d6363
> 100644
> --- a/drivers/media/i2c/adv748x/adv748x-afe.c
> +++ b/drivers/media/i2c/adv748x/adv748x-afe.c
> @@ -282,7 +282,7 @@ static int adv748x_afe_s_stream(struct v4l2_subdev *sd,
> int enable) goto unlock;
>  	}
> 
> -	ret = adv748x_tx_power(&state->txb, enable);
> +	ret = adv748x_tx_power(afe->tx, enable);
>  	if (ret)
>  		goto unlock;
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x-csi2.c
> b/drivers/media/i2c/adv748x/adv748x-csi2.c index 307966f4c736..0d6344a51795
> 100644
> --- a/drivers/media/i2c/adv748x/adv748x-csi2.c
> +++ b/drivers/media/i2c/adv748x/adv748x-csi2.c
> @@ -85,6 +85,9 @@ static int adv748x_csi2_registered(struct v4l2_subdev *sd)
> MEDIA_LNK_FL_ENABLED);
>  			if (ret)
>  				return ret;
> +
> +			/* The default HDMI output is TXA. */
> +			state->hdmi.tx = tx;
>  		}
> 
>  		if (is_afe_enabled(state)) {
> @@ -95,11 +98,17 @@ static int adv748x_csi2_registered(struct v4l2_subdev
> *sd) if (ret)
>  				return ret;
>  		}
> -	} else if (is_afe_enabled(state))
> -		return adv748x_csi2_register_link(tx, sd->v4l2_dev,
> -						  &state->afe.sd,
> -						  ADV748X_AFE_SOURCE,
> -						  MEDIA_LNK_FL_ENABLED);
> +	} else if (is_afe_enabled(state)) {
> +		ret = adv748x_csi2_register_link(tx, sd->v4l2_dev,
> +						 &state->afe.sd,
> +						 ADV748X_AFE_SOURCE,
> +						 MEDIA_LNK_FL_ENABLED);
> +		if (ret)
> +			return ret;
> +
> +		/* The default AFE output is TXB. */
> +		state->afe.tx = tx;
> +	}
> 
>  	return 0;
>  }
> diff --git a/drivers/media/i2c/adv748x/adv748x-hdmi.c
> b/drivers/media/i2c/adv748x/adv748x-hdmi.c index 35d027941482..c557f8fdf11a
> 100644
> --- a/drivers/media/i2c/adv748x/adv748x-hdmi.c
> +++ b/drivers/media/i2c/adv748x/adv748x-hdmi.c
> @@ -358,7 +358,7 @@ static int adv748x_hdmi_s_stream(struct v4l2_subdev *sd,
> int enable)
> 
>  	mutex_lock(&state->mutex);
> 
> -	ret = adv748x_tx_power(&state->txa, enable);
> +	ret = adv748x_tx_power(hdmi->tx, enable);
>  	if (ret)
>  		goto done;
> 
> diff --git a/drivers/media/i2c/adv748x/adv748x.h
> b/drivers/media/i2c/adv748x/adv748x.h index 387002d6da65..0ee3b8d5c795
> 100644
> --- a/drivers/media/i2c/adv748x/adv748x.h
> +++ b/drivers/media/i2c/adv748x/adv748x.h
> @@ -118,6 +118,8 @@ struct adv748x_hdmi {
>  	struct v4l2_dv_timings timings;
>  	struct v4l2_fract aspect_ratio;
> 
> +	struct adv748x_csi2 *tx;
> +
>  	struct {
>  		u8 edid[512];
>  		u32 present;
> @@ -148,6 +150,8 @@ struct adv748x_afe {
>  	struct v4l2_subdev sd;
>  	struct v4l2_mbus_framefmt format;
> 
> +	struct adv748x_csi2 *tx;
> +
>  	bool streaming;
>  	v4l2_std_id curr_norm;
>  	unsigned int input;

This may call for defining a common structure to store the common fields of 
adv748x_hdmi and adv748x_afe. Out of scope for this patch, but please keep it 
in mind.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

-- 
Regards,

Laurent Pinchart




  parent reply	other threads:[~2018-12-13  9:33 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-12-11 15:16 [PATCH 0/5] media: adv748x: Implement dynamic routing support Jacopo Mondi
2018-12-11 15:16 ` [PATCH 1/5] media: adv748x: Rework reset procedure Jacopo Mondi
2018-12-11 23:52   ` Kieran Bingham
2018-12-12  8:16     ` jacopo mondi
2018-12-12 10:13       ` Kieran Bingham
2018-12-13  9:15         ` Laurent Pinchart
2018-12-11 15:16 ` [PATCH 2/5] media: adv748x: csi2: Link AFE with TXA and TXB Jacopo Mondi
2018-12-11 23:07   ` Kieran Bingham
2018-12-12  8:21     ` jacopo mondi
2018-12-12 10:19       ` Kieran Bingham
2018-12-13  9:25       ` Laurent Pinchart
2018-12-11 15:16 ` [PATCH 3/5] media: adv748x: Store the source subdevice in TX Jacopo Mondi
2018-12-11 23:19   ` Kieran Bingham
2018-12-13  9:29   ` Laurent Pinchart
2018-12-11 15:16 ` [PATCH 4/5] media: adv748x: Store the TX sink in HDMI/AFE Jacopo Mondi
2018-12-11 23:24   ` Kieran Bingham
2018-12-13  9:34   ` Laurent Pinchart [this message]
2018-12-11 15:16 ` [PATCH 5/5] media: adv748x: Implement link_setup callback Jacopo Mondi
2018-12-11 23:43   ` Kieran Bingham
2018-12-12  8:27     ` jacopo mondi
2018-12-12 10:30       ` Kieran Bingham
2018-12-13  9:40   ` Laurent Pinchart
2018-12-27 20:38     ` Jacopo Mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1922179.BUMsX2vHZM@avalon \
    --to=laurent.pinchart@ideasonboard.com \
    --cc=jacopo+renesas@jmondi.org \
    --cc=kieran.bingham@ideasonboard.com \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=niklas.soderlund+renesas@ragnatech.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.