All of lore.kernel.org
 help / color / mirror / Atom feed
From: netfilter_user <netfilter_user@o2.pl>
To: netfilter@lists.netfilter.org
Subject: SNMP and IPTABLES
Date: Sat, 2 Aug 2003 11:36:13 +0200	[thread overview]
Message-ID: <1934869742.20030802113613@o2.pl> (raw)

hello everyone,

This is my problem:

As a gateway in my network is a PC with Linux ( Slackware 8.1 ), and
also on this machine is installed MRTG that listen for SNMP. I want to use SNMP
only in local ( internal ) network. I know that SNMP
use 161 and 162 port. There are no problems with comunication between
Linux machine and local hosts via SNMP.

BUT: the problem is when MRTG try to receive SNMP information from this
same machine that is installed ( MRTG is installed on Linux machine -
gateway). I dont know why because i set: iptables -A INPUT -i eth1 -p tcp -m multiport --dport 21,80,161,3128 -j ACCEPT
                                         iptables -A INPUT -i eth1 -p udp -m multiport --dport 80,67,161 -j ACCEPT
                              ...and it should resolve problem...but
                              it wont

!!!!!THIS IS IMPORTANT!!!!
when I set all INPUT ACCETP then it works. So there is no problem with
snmp and MRTG but with my iptables config :/

                                         
I use:
NET-SNMP version:  5.0.7
iptables v1.2.6a

This is my iptables config:


insmod ip_conntrack
insmod ip_conntrack_ftp

iptables -P FORWARD DROP
iptables -P INPUT DROP
iptables -P OUTPUT ACCEPT

iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A INPUT -p tcp -m multiport --dport 22 -j ACCEPT
iptables -A INPUT -i eth1 -p tcp -m multiport --dport 21,80,161,3128 -j ACCEPT
iptables -A INPUT -i eth1 -p udp -m multiport --dport 80,67,161 -j ACCEPT

iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
iptables -A FORWARD -i eth1 -p tcp -m multiport --dport 21,22,25,110,1111,6112 -j ACCEPT
iptables -A FORWARD -i eth1 -p udp -m multiport --dport 53,6112,13073,23083,23073 -j ACCEPT

iptables -I INPUT -p icmp --icmp-type echo-request -s 0.0.0.0/0 -m limit --limit 1/s -j ACCEPT
iptables -I INPUT -p icmp --icmp-type echo-request -s 0.0.0.0/0 -j DROP


#===NAT=================================================================================
modprobe iptable_nat
iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE
echo 1 > /proc/sys/net/ipv4/ip_forward


Will be thankful for any good advice

-- 
Best regards,
   mailto:netfilter_user@o2.pl



             reply	other threads:[~2003-08-02  9:36 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-08-02  9:36 netfilter_user [this message]
2003-08-02 22:36 ` SNMP and IPTABLES srgqwerty
  -- strict thread matches above, loose matches on Subject: below --
2003-08-02 11:05 netfilter_user
2003-08-02 13:28 ` Chris Wilson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1934869742.20030802113613@o2.pl \
    --to=netfilter_user@o2.pl \
    --cc=netfilter@lists.netfilter.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.