Re: u64 fun and PCI DMA not working for things behind bridges?

[Benjamin Herrenschmidt <benh@kernel.crashing.org>]

>
>The firewire device is behind the same bridge the GMAC is behind. Is
>there something special I need to do to make physical dma work all the
>time when the device you are dma'ing to/from is behind a bridge?
>
>It could be a hardware implementation problem in the uni-north FW, of
>course. I'm just trying to see if anyone has ever noticed anything.
>
>
>Right now i have to resort to having the SBP-2 driver emulate physical
>dma reads/writes by telling the firewire subsystem driver to redirect
>all reads/writes into host memory through a routine that simply does
>memcpys.
>I also tell the controller it's not allowed to allow physical dma
>accesses to be performed (there are filter registers that let you
>specify what addresses you'll allow physical dma access to, and what
>you want to go through the normal block read/write/quadlet read/write
>process) , and that the other side must do it through normal block
>reads/write packets.
>
>This works, but it's a little slow, of course.

It might be possible that we have an apple bug here... Could you try
doing as if the device was not cache coherent ?

Basically, invalidate the cache for a data block that will be filled by
the device, and flush the cache for a data block that will be read by the
device. You can do the first one with dcbi, the second with dcbf, both
loops followed by a "sync" instruction to make sure the ache operations
are completed.

Ben


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/