All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Stephen Williams" <612dlag102@sneakemail.com>
To: linuxppc-embedded@lists.linuxppc.org
Subject: Re: Configure tweaks for SystemACE without CONFIG_XILINX_OCP
Date: Thu, 10 Jun 2004 20:05:57 -0700	[thread overview]
Message-ID: <19720-17858@sneakemail.com> (raw)
In-Reply-To: <27972-80808@sneakemail.com>

[-- Attachment #1: Type: text/plain, Size: 855 bytes --]


Stephen Williams 612dlag102-at-sneakemail.com |PPC Linux Embedded| wrote:
> In order to get CONFIG_XILINX_SYSACE to define, the unmodified
> source requries that CONFIG_XILINX_OCP is defined. I created this
> patch to alloc SYSACE on by board:

I've made a patch that demonstrates what I have in mind, and
should work in general. With this patch, a configuration can
enable CONFIG_XILINX_OCP and enable CONFIG_XILINX_SYSACE and
not have ppc405gpr pci setup or PIC setup messed with.

Patch is relative the ppc.bkbits.net linuxppc-2.4 tree. I'm
guessing Andrei is the authority for this aspect.

--
Steve Williams                "The woods are lovely, dark and deep.
steve at XXXXXXXXXX           But I have promises to keep,
http://www.XXXXXXXXXX         and lines to code before I sleep,
http://www.picturel.com       And lines to code before I sleep."

[-- Attachment #2: sysace-without-virtex.patch --]
[-- Type: text/plain, Size: 1764 bytes --]

# This is a BitKeeper generated diff -Nru style patch.
#
# ChangeSet
#   2004/06/10 18:45:08-07:00 steve@wing.XXXXXXXXXX
#   Condition Xilinx on-chip processor config with
#   CONFIG_VIRTEX_II_PRO
#
# arch/ppc/kernel/ppc405_pci.c
#   2004/06/10 18:45:06-07:00 steve@wing.XXXXXXXXXX +1 -1
#   Condition Xilinx on-chip processor support with
#   CONFIG_VIRTEX_II_PRO
#
# arch/ppc/kernel/Makefile
#   2004/06/10 18:45:06-07:00 steve@wing.XXXXXXXXXX +1 -1
#   Condition Xilinx on-chip processor support with
#   CONFIG_VIRTEX_II_PRO
#
# BitKeeper/etc/ignore
#   2004/06/10 18:45:06-07:00 steve@wing.XXXXXXXXXX +4 -0
#   Added arch/ppc/boot/images/uImage arch/ppc/boot/images/vmlinux.UBoot arch/ppc/boot/images/vmlinux.gz arch/ppc/kernel/ppc_defs.h to the ignore list
#
diff -Nru a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile
--- a/arch/ppc/kernel/Makefile	2004-06-10 19:57:40 -07:00
+++ b/arch/ppc/kernel/Makefile	2004-06-10 19:57:40 -07:00
@@ -61,7 +61,7 @@
 obj-$(CONFIG_PPC_OCP)		+= ocp.o
 obj-$(CONFIG_40x)		+= ppc4xx_setup.o
 obj-$(CONFIG_4xx)		+= todc_time.o idle_4xx.o
-ifeq ($(CONFIG_XILINX_OCP),y)
+ifeq ($(CONFIG_XILINX_OCP)$(CONFIG_VIRTEX_II_PRO),yy)
 obj-$(CONFIG_40x)		+= xilinx_pic.o
 else
 obj-$(CONFIG_40x)		+= ppc4xx_pic.o
diff -Nru a/arch/ppc/kernel/ppc405_pci.c b/arch/ppc/kernel/ppc405_pci.c
--- a/arch/ppc/kernel/ppc405_pci.c	2004-06-10 19:57:40 -07:00
+++ b/arch/ppc/kernel/ppc405_pci.c	2004-06-10 19:57:40 -07:00
@@ -132,7 +132,7 @@
 	setup_indirect_pci(hose_a, PPC405_PCI_CONFIG_ADDR,
 			   PPC405_PCI_CONFIG_DATA);

-#ifdef CONFIG_XILINX_OCP
+#if defined(CONFIG_XILINX_OCP) && defined(CONFIG_VIRTEX_II_PRO)
 	/* Eliminate "unused variable" warning for pcip.  Optimizer removes. */
 	pcip = NULL;
 	new_pmm_min = PPC405_PCI_LOWER_MEM;

  reply	other threads:[~2004-06-11  3:05 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2004-06-10 21:18 Configure tweaks for SystemACE without CONFIG_XILINX_OCP Stephen Williams
2004-06-11  3:05 ` Stephen Williams [this message]
2004-06-11 17:21   ` Andrei Konovalov
     [not found] ` <1087388724.17025.4.camel@pavement.sandburst.com>
2004-06-16 14:46   ` Stephen Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=19720-17858@sneakemail.com \
    --to=612dlag102@sneakemail.com \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.