From: Sander Eikelenboom <linux@eikelenboom.it>
To: xen-devel <xen-devel@lists.xen.org>, linux-kernel@vger.kernel.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Subject: 3.8.0-rc0 on xen-unstable: RCU Stall during boot as dom0 kernel after IOAPIC
Date: Fri, 14 Dec 2012 16:55:57 +0100 [thread overview]
Message-ID: <1995613404.20121214165557@eikelenboom.it> (raw)
[-- Attachment #1: Type: text/plain, Size: 1633 bytes --]
Hi Konrad,
I just tried to boot a 3.8.0-rc0 kernel (last commit: 7313264b899bbf3988841296265a6e0e8a7b6521) as dom0 on my machine with current xen-unstable.
The boot stalls:
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-
[ 64.598628] INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 64.598676] 0: (1 GPs behind) idle=aed/140000000000000/0 drain=5 . timer not pending
[ 64.598683] (detected by 1, t=18004 jiffies, g=18446744073709551414, c=18446744073709551413, q=162)
[ 64.598692] sending NMI to all CPUs:
[ 64.598716] xen: vector 0x2 is not implemented
Perhaps an interesting line is the incomplete (no end of range, and it stalls there some time before the kernel reports the stall itself:
[ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-
The exact seem config with 3.7.0 as kernel works fine.
Complete serial log is attached.
--
Sander
[-- Attachment #2: serial.log --]
[-- Type: application/octet-stream, Size: 43140 bytes --]
__ __ _ _ _____ _ _ _
\ \/ /___ _ __ | || | |___ / _ _ _ __ ___| |_ __ _| |__ | | ___
\ // _ \ '_ \ | || |_ |_ \ __| | | | '_ \/ __| __/ _` | '_ \| |/ _ \
/ \ __/ | | | |__ _| ___) |__| |_| | | | \__ \ || (_| | |_) | | __/
/_/\_\___|_| |_| |_|(_)____/ \__,_|_| |_|___/\__\__,_|_.__/|_|\___|
(XEN) Xen version 4.3-unstable (root@dyndns.org) (gcc (Debian 4.4.5-8) 4.4.5) Tue Dec 11 15:25:24 CET 2012
(XEN) Latest ChangeSet: Mon Dec 10 11:16:17 2012 +0000 26270:03cb71bc32f9
(XEN) Bootloader: GRUB 1.98+20100804-14+squeeze1
(XEN) Command line: dom0_mem=1024M,max:1024M loglvl=all loglvl_guest=all console_timestamps vga=gfx-1280x1024x32 cpuidle cpufreq=xen noreboot debug lapic=debug apic_verbosity=debug apic=debug iommu=on,verbose,debug,amd-iommu-debug com1=38400,8n1 console=vga,com1
(XEN) Video information:
(XEN) VGA is graphics mode 1280x1024, 32 bpp
(XEN) VBE/DDC methods: V2; EDID transfer time: 1 seconds
(XEN) Disc information:
(XEN) Found 3 MBR signatures
(XEN) Found 3 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009f000 (usable)
(XEN) 000000000009f000 - 00000000000a0000 (reserved)
(XEN) 00000000000e4000 - 0000000000100000 (reserved)
(XEN) 0000000000100000 - 00000000aff90000 (usable)
(XEN) 00000000aff90000 - 00000000aff9e000 (ACPI data)
(XEN) 00000000aff9e000 - 00000000affe0000 (ACPI NVS)
(XEN) 00000000affe0000 - 00000000b0000000 (reserved)
(XEN) 00000000ffe00000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000250000000 (usable)
(XEN) ACPI: RSDP 000FB100, 0014 (r0 ACPIAM)
(XEN) ACPI: RSDT AFF90000, 0048 (r1 MSI OEMSLIC 20100913 MSFT 97)
(XEN) ACPI: FACP AFF90200, 0084 (r1 7640MS A7640100 20100913 MSFT 97)
(XEN) ACPI: DSDT AFF905E0, 9427 (r1 A7640 A7640100 100 INTL 20051117)
(XEN) ACPI: FACS AFF9E000, 0040
(XEN) ACPI: APIC AFF90390, 0088 (r1 7640MS A7640100 20100913 MSFT 97)
(XEN) ACPI: MCFG AFF90420, 003C (r1 7640MS OEMMCFG 20100913 MSFT 97)
(XEN) ACPI: SLIC AFF90460, 0176 (r1 MSI OEMSLIC 20100913 MSFT 97)
(XEN) ACPI: OEMB AFF9E040, 0072 (r1 7640MS A7640100 20100913 MSFT 97)
(XEN) ACPI: SRAT AFF9A5E0, 0108 (r3 AMD FAM_F_10 2 AMD 1)
(XEN) ACPI: HPET AFF9A6F0, 0038 (r1 7640MS OEMHPET 20100913 MSFT 97)
(XEN) ACPI: IVRS AFF9A730, 00F8 (r1 AMD RD890S 202031 AMD 0)
(XEN) ACPI: SSDT AFF9A830, 0DA4 (r1 A M I POWERNOW 1 AMD 1)
(XEN) System RAM: 8191MB (8387772kB)
(XEN) SRAT: PXM 0 -> APIC 0 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 1 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 2 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 3 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 4 -> Node 0
(XEN) SRAT: PXM 0 -> APIC 5 -> Node 0
(XEN) SRAT: Node 0 PXM 0 0-a0000
(XEN) SRAT: Node 0 PXM 0 100000-b0000000
(XEN) SRAT: Node 0 PXM 0 100000000-250000000
(XEN) NUMA: Allocated memnodemap from 24d960000 - 24d963000
(XEN) NUMA: Using 8 for the hash shift.
(XEN) Domain heap initialised
(XEN) vesafb: framebuffer at 0xfb000000, mapped to 0xffff82c000081000, using 6144k, total 14336k
(XEN) vesafb: mode is 1280x1024x32, linelength=5120, font 8x16
(XEN) vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) APIC boot state is 'xapic'
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[aff9e00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
(XEN) Processor #2 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
(XEN) Processor #3 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
(XEN) Processor #4 0:10 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
(XEN) Processor #5 0:10 APIC version 16
(XEN) ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
(XEN) ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
(XEN) IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 2 I/O APICs
(XEN) ACPI: HPET id: 0x8300 base: 0xfed00000
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) SMP: Allowing 6 CPUs (0 hotplug CPUs)
(XEN) mapped APIC to ffff82c3ffdfb000 (fee00000)
(XEN) mapped IOAPIC to ffff82c3ffdfa000 (fec00000)
(XEN) mapped IOAPIC to ffff82c3ffdf9000 (fec20000)
(XEN) IRQ limits: 56 GSI, 1112 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 3200.126 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD Fam10h machine check reporting enabled
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0000 buses 00 - ff
(XEN) PCI: Not using MCFG for segment 0000 bus 00-ff
(XEN) AMD-Vi: Found MSI capability block at 0x54
(XEN) AMD-Vi: ACPI Table:
(XEN) AMD-Vi: Signature IVRS
(XEN) AMD-Vi: Length 0xf8
(XEN) AMD-Vi: Revision 0x1
(XEN) AMD-Vi: CheckSum 0x50
(XEN) AMD-Vi: OEM_Id AMD
(XEN) AMD-Vi: OEM_Table_Id RD890S
(XEN) AMD-Vi: OEM_Revision 0x202031
(XEN) AMD-Vi: Creator_Id AMD
(XEN) AMD-Vi: Creator_Revision 0
(XEN) AMD-Vi: IVRS Block:
(XEN) AMD-Vi: Type 0x10
(XEN) AMD-Vi: Flags 0x3e
(XEN) AMD-Vi: Length 0xc8
(XEN) AMD-Vi: Dev_Id 0x2
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: Dev_Id Range: 0 -> 0x2
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x10
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xb00
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x18
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x900
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x43
(XEN) AMD-Vi: Dev_Id 0xa08
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: Dev_Id Range: 0xa08 -> 0xaff
(XEN) AMD-Vi: Dev_Id Alias: 0xa00
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x28
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x800
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x30
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x700
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x50
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x600
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x58
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0x500
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x500 -> 0x501
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x68
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x400
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x88
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0x90
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x90 -> 0x92
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0x98
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x98 -> 0x9a
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa0
(XEN) AMD-Vi: Flags 0xd7
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa1
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa2
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa3
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa4
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x43
(XEN) AMD-Vi: Dev_Id 0x300
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: Dev_Id Range: 0x300 -> 0x3ff
(XEN) AMD-Vi: Dev_Id Alias: 0xa4
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa5
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa8
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0xa9
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x2
(XEN) AMD-Vi: Dev_Id 0x100
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x3
(XEN) AMD-Vi: Dev_Id 0xb0
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: Dev_Id Range: 0xb0 -> 0xb2
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0
(XEN) AMD-Vi: Dev_Id 0
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x48
(XEN) AMD-Vi: Dev_Id 0
(XEN) AMD-Vi: Flags 0xd7
(XEN) AMD-Vi: IVHD Device Entry:
(XEN) AMD-Vi: Type 0x48
(XEN) AMD-Vi: Dev_Id 0
(XEN) AMD-Vi: Flags 0
(XEN) AMD-Vi: IOMMU 0 Enabled.
(XEN) AMD-Vi: Enabling global vector map
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) Getting VERSION: 80050010
(XEN) Getting VERSION: 80050010
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 0x4 after: 0
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 6-0, 6-16, 6-17, 6-18, 6-19, 6-20, 6-21, 6-22, 6-23, 7-0, 7-1, 7-2, 7-3, 7-4, 7-5, 7-6, 7-7, 7-8, 7-9, 7-10, 7-11, 7-12, 7-13, 7-14, 7-15, 7-16, 7-17, 7-18, 7-19, 7-20, 7-21, 7-22, 7-23, 7-24, 7-25, 7-26, 7-27, 7-28, 7-29, 7-30, 7-31 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) number of MP IRQ sources: 15.
(XEN) number of IO-APIC #6 registers: 24.
(XEN) number of IO-APIC #7 registers: 32.
(XEN) testing the IO APIC.......................
(XEN) IO APIC #6......
(XEN) .... register #00: 06000000
(XEN) ....... : physical APIC id: 06
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 00178021
(XEN) ....... : max redirection entries: 0017
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0021
(XEN) .... register #02: 06000000
(XEN) ....... : arbitration: 06
(XEN) .... register #03: 07000000
(XEN) ....... : Boot DT : 0
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 001 01 0 0 0 0 0 1 1 30
(XEN) 02 001 01 0 0 0 0 0 1 1 F0
(XEN) 03 001 01 0 0 0 0 0 1 1 38
(XEN) 04 001 01 0 0 0 0 0 1 1 F1
(XEN) 05 001 01 0 0 0 0 0 1 1 40
(XEN) 06 001 01 0 0 0 0 0 1 1 48
(XEN) 07 001 01 0 0 0 0 0 1 1 50
(XEN) 08 001 01 0 0 0 0 0 1 1 58
(XEN) 09 001 01 1 1 0 1 0 1 1 60
(XEN) 0a 001 01 0 0 0 0 0 1 1 68
(XEN) 0b 001 01 0 0 0 0 0 1 1 70
(XEN) 0c 001 01 0 0 0 0 0 1 1 78
(XEN) 0d 001 01 0 0 0 0 0 1 1 88
(XEN) 0e 001 01 0 0 0 0 0 1 1 90
(XEN) 0f 001 01 0 0 0 0 0 1 1 98
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) IO APIC #7......
(XEN) .... register #00: 07000000
(XEN) ....... : physical APIC id: 07
(XEN) ....... : Delivery Type: 0
(XEN) ....... : LTS : 0
(XEN) .... register #01: 001F8021
(XEN) ....... : max redirection entries: 001F
(XEN) ....... : PRQ implemented: 1
(XEN) ....... : IO APIC version: 0021
(XEN) .... register #02: 00000000
(XEN) ....... : arbitration: 00
(XEN) .... IRQ redirection table:
(XEN) NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
(XEN) 00 000 00 1 0 0 0 0 0 0 00
(XEN) 01 000 00 1 0 0 0 0 0 0 00
(XEN) 02 000 00 1 0 0 0 0 0 0 00
(XEN) 03 000 00 1 0 0 0 0 0 0 00
(XEN) 04 000 00 1 0 0 0 0 0 0 00
(XEN) 05 000 00 1 0 0 0 0 0 0 00
(XEN) 06 000 00 1 0 0 0 0 0 0 00
(XEN) 07 000 00 1 0 0 0 0 0 0 00
(XEN) 08 000 00 1 0 0 0 0 0 0 00
(XEN) 09 000 00 1 0 0 0 0 0 0 00
(XEN) 0a 000 00 1 0 0 0 0 0 0 00
(XEN) 0b 000 00 1 0 0 0 0 0 0 00
(XEN) 0c 000 00 1 0 0 0 0 0 0 00
(XEN) 0d 000 00 1 0 0 0 0 0 0 00
(XEN) 0e 000 00 1 0 0 0 0 0 0 00
(XEN) 0f 000 00 1 0 0 0 0 0 0 00
(XEN) 10 000 00 1 0 0 0 0 0 0 00
(XEN) 11 000 00 1 0 0 0 0 0 0 00
(XEN) 12 000 00 1 0 0 0 0 0 0 00
(XEN) 13 000 00 1 0 0 0 0 0 0 00
(XEN) 14 000 00 1 0 0 0 0 0 0 00
(XEN) 15 000 00 1 0 0 0 0 0 0 00
(XEN) 16 000 00 1 0 0 0 0 0 0 00
(XEN) 17 000 00 1 0 0 0 0 0 0 00
(XEN) 18 000 00 1 0 0 0 0 0 0 00
(XEN) 19 000 00 1 0 0 0 0 0 0 00
(XEN) 1a 000 00 1 0 0 0 0 0 0 00
(XEN) 1b 000 00 1 0 0 0 0 0 0 00
(XEN) 1c 000 00 1 0 0 0 0 0 0 00
(XEN) 1d 000 00 1 0 0 0 0 0 0 00
(XEN) 1e 000 00 1 0 0 0 0 0 0 00
(XEN) 1f 000 00 1 0 0 0 0 0 0 00
(XEN) Using vector-based indexing
(XEN) IRQ to pin mappings:
(XEN) IRQ240 -> 0:2
(XEN) IRQ48 -> 0:1
(XEN) IRQ56 -> 0:3
(XEN) IRQ241 -> 0:4
(XEN) IRQ64 -> 0:5
(XEN) IRQ72 -> 0:6
(XEN) IRQ80 -> 0:7
(XEN) IRQ88 -> 0:8
(XEN) IRQ96 -> 0:9
(XEN) IRQ104 -> 0:10
(XEN) IRQ112 -> 0:11
(XEN) IRQ120 -> 0:12
(XEN) IRQ136 -> 0:13
(XEN) IRQ144 -> 0:14
(XEN) IRQ152 -> 0:15
(XEN) .................................... done.
(XEN) Using local APIC timer interrupts.
(XEN) calibrating APIC timer ...
(XEN) ..... CPU clock speed is 3200.1209 MHz.
(XEN) ..... host bus clock speed is 200.0074 MHz.
(XEN) ..... bus_scale = 0xccd7
(XEN) [2012-12-14 15:34:42] Platform timer is 14.318MHz HPET
(XEN) [2012-12-14 15:34:42] Allocated console ring of 64 KiB.
(XEN) [2012-12-14 15:34:42] HVM: ASIDs enabled.
(XEN) [2012-12-14 15:34:42] SVM: Supported advanced features:
(XEN) [2012-12-14 15:34:42] - Nested Page Tables (NPT)
(XEN) [2012-12-14 15:34:42] - Last Branch Record (LBR) Virtualisation
(XEN) [2012-12-14 15:34:42] - Next-RIP Saved on #VMEXIT
(XEN) [2012-12-14 15:34:42] - Pause-Intercept Filter
(XEN) [2012-12-14 15:34:42] HVM: SVM enabled
(XEN) [2012-12-14 15:34:42] HVM: Hardware Assisted Paging (HAP) detected
(XEN) [2012-12-14 15:34:42] HVM: HAP page sizes: 4kB, 2MB, 1GB
(XEN) [2012-12-14 15:34:41] masked ExtINT on CPU#1
(XEN) [2012-12-14 15:34:42] microcode: collect_cpu_info: patch_id=0x10000bf
(XEN) [2012-12-14 15:34:41] masked ExtINT on CPU#2
(XEN) [2012-12-14 15:34:42] microcode: collect_cpu_info: patch_id=0x10000bf
(XEN) [2012-12-14 15:34:41] masked ExtINT on CPU#3
(XEN) [2012-12-14 15:34:42] microcode: collect_cpu_info: patch_id=0x10000bf
(XEN) [2012-12-14 15:34:41] masked ExtINT on CPU#4
(XEN) [2012-12-14 15:34:42] microcode: collect_cpu_info: patch_id=0x10000bf
(XEN) [2012-12-14 15:34:41] masked ExtINT on CPU#5
(XEN) [2012-12-14 15:34:43] Brought up 6 CPUs
(XEN) [2012-12-14 15:34:43] microcode: collect_cpu_info: patch_id=0x10000bf
(XEN) [2012-12-14 15:34:43] HPET: 3 timers (3 will be used for broadcast)
(XEN) [2012-12-14 15:34:43] ACPI sleep modes: S3
(XEN) [2012-12-14 15:34:43] MCA: Use hw thresholding to adjust polling frequency
(XEN) [2012-12-14 15:34:43] mcheck_poll: Machine check polling timer started.
(XEN) [2012-12-14 15:34:43] Xenoprofile: Failed to setup IBS LVT offset, IBSCTL = 0xffffffff
(XEN) [2012-12-14 15:34:43] *** LOADING DOMAIN 0 ***
(XEN) [2012-12-14 15:34:43] elf_parse_binary: phdr: paddr=0x1000000 memsz=0xd5b000
(XEN) [2012-12-14 15:34:43] elf_parse_binary: phdr: paddr=0x1e00000 memsz=0xda0f0
(XEN) [2012-12-14 15:34:43] elf_parse_binary: phdr: paddr=0x1edb000 memsz=0x13dc0
(XEN) [2012-12-14 15:34:43] elf_parse_binary: phdr: paddr=0x1eef000 memsz=0xe06000
(XEN) [2012-12-14 15:34:43] elf_parse_binary: memory: 0x1000000 -> 0x2cf5000
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: GUEST_OS = "linux"
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: ENTRY = 0xffffffff81eef210
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81001000
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: PAE_MODE = "yes"
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: LOADER = "generic"
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) [2012-12-14 15:34:43] elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) [2012-12-14 15:34:43] elf_xen_addr_calc_check: addresses:
(XEN) [2012-12-14 15:34:43] virt_base = 0xffffffff80000000
(XEN) [2012-12-14 15:34:43] elf_paddr_offset = 0x0
(XEN) [2012-12-14 15:34:43] virt_offset = 0xffffffff80000000
(XEN) [2012-12-14 15:34:43] virt_kstart = 0xffffffff81000000
(XEN) [2012-12-14 15:34:43] virt_kend = 0xffffffff82cf5000
(XEN) [2012-12-14 15:34:43] virt_entry = 0xffffffff81eef210
(XEN) [2012-12-14 15:34:43] p2m_base = 0xffffffffffffffff
(XEN) [2012-12-14 15:34:43] Xen kernel: 64-bit, lsb, compat32
(XEN) [2012-12-14 15:34:43] Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x2cf5000
(XEN) [2012-12-14 15:34:43] PHYSICAL MEMORY ARRANGEMENT:
(XEN) [2012-12-14 15:34:43] Dom0 alloc.: 0000000240000000->0000000244000000 (242516 pages to be allocated)
(XEN) [2012-12-14 15:34:43] Init. ramdisk: 000000024f354000->000000024ffffc00
(XEN) [2012-12-14 15:34:43] VIRTUAL MEMORY ARRANGEMENT:
(XEN) [2012-12-14 15:34:43] Loaded kernel: ffffffff81000000->ffffffff82cf5000
(XEN) [2012-12-14 15:34:43] Init. ramdisk: ffffffff82cf5000->ffffffff839a0c00
(XEN) [2012-12-14 15:34:43] Phys-Mach map: ffffffff839a1000->ffffffff83ba1000
(XEN) [2012-12-14 15:34:43] Start info: ffffffff83ba1000->ffffffff83ba14b4
(XEN) [2012-12-14 15:34:43] Page tables: ffffffff83ba2000->ffffffff83bc5000
(XEN) [2012-12-14 15:34:43] Boot stack: ffffffff83bc5000->ffffffff83bc6000
(XEN) [2012-12-14 15:34:43] TOTAL: ffffffff80000000->ffffffff84000000
(XEN) [2012-12-14 15:34:43] ENTRY ADDRESS: ffffffff81eef210
(XEN) [2012-12-14 15:34:43] Dom0 has maximum 6 VCPUs
(XEN) [2012-12-14 15:34:43] elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81d5b000
(XEN) [2012-12-14 15:34:43] elf_load_binary: phdr 1 at 0xffffffff81e00000 -> 0xffffffff81eda0f0
(XEN) [2012-12-14 15:34:43] elf_load_binary: phdr 2 at 0xffffffff81edb000 -> 0xffffffff81eeedc0
(XEN) [2012-12-14 15:34:43] elf_load_binary: phdr 3 at 0xffffffff81eef000 -> 0xffffffff81f95000
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x2, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x10, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x18, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x28, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x30, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x50, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x58, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x68, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x88, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x90, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x92, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x98, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:43] AMD-Vi: Setup I/O page table: device id = 0x9a, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0xa0, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0xa1, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0xa2, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0xa3, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0xa4, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0xa5, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0xa8, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0xb0, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0xb2, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: No iommu for device 0000:00:18.0
(XEN) [2012-12-14 15:34:44] AMD-Vi: No iommu for device 0000:00:18.1
(XEN) [2012-12-14 15:34:44] AMD-Vi: No iommu for device 0000:00:18.2
(XEN) [2012-12-14 15:34:44] AMD-Vi: No iommu for device 0000:00:18.3
(XEN) [2012-12-14 15:34:44] AMD-Vi: No iommu for device 0000:00:18.4
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0x400, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0x500, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0x501, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0x600, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0x700, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0x800, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0x900, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0xa00, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] AMD-Vi: Setup I/O page table: device id = 0xb00, root table = 0x24d802000, domain = 0, paging mode = 3
(XEN) [2012-12-14 15:34:44] Scrubbing Free RAM: .......................................................................done.
(XEN) [2012-12-14 15:34:46] Initial low memory virq threshold set at 0x4000 pages.
(XEN) [2012-12-14 15:34:46] Std. Loglevel: All
(XEN) [2012-12-14 15:34:46] Guest Loglevel: All
(XEN) [2012-12-14 15:34:46] Xen is relinquishing VGA console.
(XEN) [2012-12-14 15:34:46] *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) [2012-12-14 15:34:46] Freed 252kB init memory.
mapping kernel into physical memory
about to get started...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.0rc0-20121214-netdebug (root@serveerstertje) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT Fri Dec 14 10:05:27 CET 2012
[ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro verbose mem=1024M console=hvc0 console=tty0 nomodeset vga=794 video=vesafb acpi_enforce_resources=lax r8169.use_dac=1 earlyprintk=xen max_loop=50 loop_max_part=10 xen-pciback.hide=(03:06.0)(04:00.*)(05:00.*)(06:00.*)(0a:01.*) debug loglevel=10
[ 0.000000] Freeing 9f-100 pfn range: 97 pages freed
[ 0.000000] Released 97 pages of unused memory
[ 0.000000] Set 327889 page(s) to 1-1 mapping
[ 0.000000] Populating 40000-40061 pfn range: 97 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000040060fff] usable
[ 0.000000] Xen: [mem 0x0000000040061000-0x00000000aff8ffff] unusable
[ 0.000000] Xen: [mem 0x00000000aff90000-0x00000000aff9dfff] ACPI data
[ 0.000000] Xen: [mem 0x00000000aff9e000-0x00000000affdffff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000affe0000-0x00000000afffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000024fffffff] unusable
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: user-defined physical RAM map:
[ 0.000000] user: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] user: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] user: [mem 0x0000000000100000-0x000000003fffffff] usable
[ 0.000000] user: [mem 0x0000000040061000-0x00000000aff8ffff] unusable
[ 0.000000] user: [mem 0x00000000aff90000-0x00000000aff9dfff] ACPI data
[ 0.000000] user: [mem 0x00000000aff9e000-0x00000000affdffff] ACPI NVS
[ 0.000000] user: [mem 0x00000000affe0000-0x00000000afffffff] reserved
[ 0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] user: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] user: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] user: [mem 0x0000000100000000-0x000000024fffffff] unusable
[ 0.000000] DMI present.
[ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x039a0fff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x3fffffff]
[ 0.000000] [mem 0x00000000-0x3fffffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x3fffffff @ [mem 0x02af3000-0x02cf4fff]
[ 0.000000] xen: setting RW the range 2cd3000 - 2cf5000
[ 0.000000] RAMDISK: [mem 0x02cf5000-0x039a0fff]
[ 0.000000] ACPI: RSDP 00000000000fb100 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000aff90000 00048 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000aff90200 00084 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000aff905e0 09427 (v01 A7640 A7640100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000aff9e000 00040
[ 0.000000] ACPI: APIC 00000000aff90390 00088 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000aff90420 0003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000aff90460 00176 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000aff9e040 00072 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000aff9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000aff9a6f0 00038 (v01 7640MS OEMHPET 20100913 MSFT 00000097)
[ 0.000000] ACPI: IVRS 00000000aff9a730 000F8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 00000000aff9a830 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3fffffff]
[ 0.000000] NODE_DATA [mem 0x3fff5000-0x3fffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x3fffffff]
[ 0.000000] On node 0 totalpages: 262031
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4032 pages used for memmap
[ 0.000000] DMA32 zone: 254016 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] smpboot: Allowing 6 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 72
[ 0.000000] e820: [mem 0xb0000000-0xfebfffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] Xen version: 4.3-unstable (preserve-AD)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:6 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88003f800000 s81344 r8192 d21056 u262144
[ 0.000000] pcpu-alloc: s81344 r8192 d21056 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 - -
[ 4.269498] Built 1 zonelists in Node order, mobility grouping on. Total pages: 257929
[ 4.269501] Policy zone: DMA32
[ 4.269509] Kernel command line: root=/dev/mapper/serveerstertje-root ro verbose mem=1024M console=hvc0 console=tty0 nomodeset vga=794 video=vesafb acpi_enforce_resources=lax r8169.use_dac=1 earlyprintk=xen max_loop=50 loop_max_part=10 xen-pciback.hide=(03:06.0)(04:00.*)(05:00.*)(06:00.*)(0a:01.*) debug loglevel=10
[ 4.269672] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 4.269677] __ex_table already sorted, skipping sort
[ 4.310996] software IO TLB [mem 0x3a600000-0x3e5fffff] (64MB) mapped at [ffff88003a600000-ffff88003e5fffff]
[ 4.316206] Memory: 922280k/1048576k available (9242k kernel code, 452k absent, 125844k reserved, 5962k data, 712k init)
[ 4.316302] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 4.316376] Preemptible hierarchical RCU implementation.
[ 4.316377] RCU dyntick-idle grace-period acceleration is enabled.
[ 4.316379] Additional per-CPU info printed with stalls.
[ 4.316381] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 4.316419] NR_IRQS:4352 nr_irqs:1272 16
[ 4.316493] xen: sci override: global_irq=9 trigger=0 polarity=1
[ 4.316496] xen: registering gsi 9 triggering 0 polarity 1
[ 4.316528] xen: --> pirq=9 -> irq=9 (gsi=9)
(XEN) [2012-12-14 15:34:46] IOAPIC[0]: Set PCI routing entry (6-9 -> 0x60 -> IRQ 9 Mode:1 Active:1)
[ 4.316563] xen: acpi sci 9
[ 4.316568] xen: --> pirq=1 -> irq=1 (gsi=1)
[ 4.316573] xen: --> pirq=2 -> irq=2 (gsi=2)
[ 4.316577] xen: --> pirq=3 -> irq=3 (gsi=3)
[ 4.316581] xen: --> pirq=4 -> irq=4 (gsi=4)
[ 4.316584] xen: --> pirq=5 -> irq=5 (gsi=5)
[ 4.316588] xen: --> pirq=6 -> irq=6 (gsi=6)
[ 4.316592] xen: --> pirq=7 -> irq=7 (gsi=7)
[ 4.316596] xen: --> pirq=8 -> irq=8 (gsi=8)
[ 4.316600] xen: --> pirq=10 -> irq=10 (gsi=10)
[ 4.316604] xen: --> pirq=11 -> irq=11 (gsi=11)
[ 4.316608] xen: --> pirq=12 -> irq=12 (gsi=12)
[ 4.316612] xen: --> pirq=13 -> irq=13 (gsi=13)
[ 4.316616] xen: --> pirq=14 -> irq=14 (gsi=14)
[ 4.316620] xen: --> pirq=15 -> irq=15 (gsi=15)
[ 4.316702] Console: colour dummy device 80x25
[ 4.316707] console [tty0] enabled, bootconsole disabled
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.7.0rc0-20121214-netdebug (root@serveerstertje) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP PREEMPT Fri Dec 14 10:05:27 CET 2012
[ 0.000000] Command line: root=/dev/mapper/serveerstertje-root ro verbose mem=1024M console=hvc0 console=tty0 nomodeset vga=794 video=vesafb acpi_enforce_resources=lax r8169.use_dac=1 earlyprintk=xen max_loop=50 loop_max_part=10 xen-pciback.hide=(03:06.0)(04:00.*)(05:00.*)(06:00.*)(0a:01.*) debug loglevel=10
[ 0.000000] Freeing 9f-100 pfn range: 97 pages freed
[ 0.000000] 1-1 mapping on 9f->100
[ 0.000000] 1-1 mapping on aff90->100000
[ 0.000000] Released 97 pages of unused memory
[ 0.000000] Set 327889 page(s) to 1-1 mapping
[ 0.000000] Populating 40000-40061 pfn range: 97 pages added
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] Xen: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] Xen: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] Xen: [mem 0x0000000000100000-0x0000000040060fff] usable
[ 0.000000] Xen: [mem 0x0000000040061000-0x00000000aff8ffff] unusable
[ 0.000000] Xen: [mem 0x00000000aff90000-0x00000000aff9dfff] ACPI data
[ 0.000000] Xen: [mem 0x00000000aff9e000-0x00000000affdffff] ACPI NVS
[ 0.000000] Xen: [mem 0x00000000affe0000-0x00000000afffffff] reserved
[ 0.000000] Xen: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] Xen: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] Xen: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] Xen: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] Xen: [mem 0x0000000100000000-0x000000024fffffff] unusable
[ 0.000000] e820: remove [mem 0x40000000-0xfffffffffffffffe] usable
[ 0.000000] bootconsole [xenboot0] enabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: user-defined physical RAM map:
[ 0.000000] user: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] user: [mem 0x000000000009f000-0x00000000000fffff] reserved
[ 0.000000] user: [mem 0x0000000000100000-0x000000003fffffff] usable
[ 0.000000] user: [mem 0x0000000040061000-0x00000000aff8ffff] unusable
[ 0.000000] user: [mem 0x00000000aff90000-0x00000000aff9dfff] ACPI data
[ 0.000000] user: [mem 0x00000000aff9e000-0x00000000affdffff] ACPI NVS
[ 0.000000] user: [mem 0x00000000affe0000-0x00000000afffffff] reserved
[ 0.000000] user: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] user: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] user: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] user: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] user: [mem 0x0000000100000000-0x000000024fffffff] unusable
[ 0.000000] DMI present.
[ 0.000000] DMI: MSI MS-7640/890FXA-GD70 (MS-7640) , BIOS V1.8B1 09/13/2010
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x40000 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped: [mem 0x00000000-0x039a0fff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x3fffffff]
[ 0.000000] [mem 0x00000000-0x3fffffff] page 4k
[ 0.000000] kernel direct mapping tables up to 0x3fffffff @ [mem 0x02af3000-0x02cf4fff]
[ 0.000000] xen: setting RW the range 2cd3000 - 2cf5000
[ 0.000000] RAMDISK: [mem 0x02cf5000-0x039a0fff]
[ 0.000000] ACPI: RSDP 00000000000fb100 00014 (v00 ACPIAM)
[ 0.000000] ACPI: RSDT 00000000aff90000 00048 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000aff90200 00084 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000aff905e0 09427 (v01 A7640 A7640100 00000100 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000aff9e000 00040
[ 0.000000] ACPI: APIC 00000000aff90390 00088 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000aff90420 0003C (v01 7640MS OEMMCFG 20100913 MSFT 00000097)
[ 0.000000] ACPI: SLIC 00000000aff90460 00176 (v01 MSI OEMSLIC 20100913 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000aff9e040 00072 (v01 7640MS A7640100 20100913 MSFT 00000097)
[ 0.000000] ACPI: SRAT 00000000aff9a5e0 00108 (v03 AMD FAM_F_10 00000002 AMD 00000001)
[ 0.000000] ACPI: HPET 00000000aff9a6f0 00038 (v01 7640MS OEMHPET 20100913 MSFT 00000097)
[ 0.000000] ACPI: IVRS 00000000aff9a730 000F8 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: SSDT 00000000aff9a830 00DA4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] NUMA turned off
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x3fffffff]
[ 0.000000] NODE_DATA [mem 0x3fff5000-0x3fffffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x3fffffff]
[ 0.000000] On node 0 totalpages: 262031
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 4032 pages used for memmap
[ 0.000000] DMA32 zone: 254016 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-
[ 64.598628] INFO: rcu_preempt detected stalls on CPUs/tasks:
[ 64.598676] 0: (1 GPs behind) idle=aed/140000000000000/0 drain=5 . timer not pending
[ 64.598683] (detected by 1, t=18004 jiffies, g=18446744073709551414, c=18446744073709551413, q=162)
[ 64.598692] sending NMI to all CPUs:
[ 64.598716] xen: vector 0x2 is not implemented
next reply other threads:[~2012-12-14 15:56 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-12-14 15:55 Sander Eikelenboom [this message]
2012-12-16 17:38 ` 3.8.0-rc0 on xen-unstable: RCU Stall during boot as dom0 kernel after IOAPIC Konrad Rzeszutek Wilk
2012-12-16 19:42 ` Sander Eikelenboom
2012-12-17 14:58 ` Sander Eikelenboom
2012-12-17 20:32 ` Sander Eikelenboom
2012-12-17 20:46 ` Konrad Rzeszutek Wilk
2012-12-17 21:12 ` Konrad Rzeszutek Wilk
2012-12-17 21:35 ` Sander Eikelenboom
2012-12-18 1:12 ` Konrad Rzeszutek Wilk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1995613404.20121214165557@eikelenboom.it \
--to=linux@eikelenboom.it \
--cc=konrad.wilk@oracle.com \
--cc=linux-kernel@vger.kernel.org \
--cc=xen-devel@lists.xen.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.