From mboxrd@z Thu Jan 1 00:00:00 1970 From: Spam Message-ID: <199870551.20031126190959@tnonline.net> Subject: Re: [linux-lvm] LVM across network In-Reply-To: <20031126165649.1fd1c51b.neuron@hollowtube.mine.nu> References: <11659189187.20031126163948@tnonline.net> <20031126165649.1fd1c51b.neuron@hollowtube.mine.nu> MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Sender: linux-lvm-admin@sistina.com Errors-To: linux-lvm-admin@sistina.com Reply-To: linux-lvm@sistina.com List-Help: List-Post: List-Subscribe: , List-Unsubscribe: , List-Archive: Date: Wed Nov 26 12:11:01 2003 List-Id: Content-Type: text/plain; charset="us-ascii" To: neuron As far as I can tell NBD 2.x is stable. You can setup failovers with NBD if you have more than one NIC in the computers. I have not tested this myself. The risk is that you accidentally disconnect a network cable etc. Otherwise it is up to the stability of each machine to make this work in the long run. For temp space this is fine =). I doubt any network filesystem will allow you to disconnect a machine and still be able to operate. NFS etc support a reastart of the machine, but you cannot consolidate the distributed diskspace into one logical volume. Give NBD a try and test what happens if you disconnect a computer then reconnect it. I am using NBD 2.0 in Gentoo Linux together with LVM and ReiserFS without any problems (so far). > quick question about this, been looking for a good solution for > this a long time. Any filesystems that can loose connectivity? I > have a setup where I can't guarantee all the computers will stay > stable, but it's only a setup for temporary storage anyway (1gb > networks, temporary storage is for rendering files). >> >> Yes. This is possible with NBD 2.0 and later (earlier nbd tools has >> limitation of 4GB per shared disk/volume/device). You need to >> compile the NBD (Network Block Device) module in the kernel too. >> >> Then simply run on the server (the machines hosting spare volumes): >> >> nbd-server 10000 /dev/hdax (replace 10009 with the port you want >> to use) >> >> On the client machine (where you want to run LVM to collect all >> space; >> >> nbd-client IP port /dev/nbd/0 >> >> For each server you connect simply change the IP/port and the NBD >> device number. After this you run "vgscan" and "vgchange -ay vg" >> >> You should be warned though. If you loose network connectivity you >> can end up with filesystem damage. >> >> >> > Hello, >> > I have simple question. Is it possible run LVM across network ? >> > For example, first disk on pc1, second on pc3, third on pc3... >> > I need file system that colecting free space across network onto one >> > point. >> > Thank you, Marek Jan >> >> >> > _______________________________________________ >> > linux-lvm mailing list >> > linux-lvm@sistina.com >> > http://lists.sistina.com/mailman/listinfo/linux-lvm >> > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/ >> >> >> > _______________________________________________ > linux-lvm mailing list > linux-lvm@sistina.com > http://lists.sistina.com/mailman/listinfo/linux-lvm > read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/