From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from cthulhu.engr.sgi.com (cthulhu.engr.sgi.com [192.26.80.2]) by neteng.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id VAA35071 for ; Wed, 7 Apr 1999 21:17:42 -0700 (PDT) Return-Path: Received: (from majordomo-owner@localhost) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) id VAA49697 for linux-list; Wed, 7 Apr 1999 21:15:02 -0700 (PDT) mail_from (owner-linux@relay.engr.sgi.com) Received: from sgi.com (sgi.engr.sgi.com [192.26.80.37]) by cthulhu.engr.sgi.com (980427.SGI.8.8.8/970903.SGI.AUTOCF) via ESMTP id VAA40081 for ; Wed, 7 Apr 1999 21:14:59 -0700 (PDT) mail_from (ulfc@bun.falkenberg.se) Received: from bun.falkenberg.se (dialup71-5-11.swipnet.se [130.244.71.75]) by sgi.com (980327.SGI.8.8.8-aspam/980304.SGI-aspam: SGI does not authorize the use of its proprietary systems or networks for unsolicited or bulk email from the Internet.) via ESMTP id VAA07612 for ; Wed, 7 Apr 1999 21:14:57 -0700 (PDT) mail_from (ulfc@bun.falkenberg.se) Received: (from ulfc@localhost) by bun.falkenberg.se (8.8.7/8.8.7) id GAA05275; Thu, 8 Apr 1999 06:14:52 +0200 Date: Thu, 8 Apr 1999 06:14:52 +0200 From: Ulf Carlsson To: Matthias Kleinschmidt Cc: Linux SGI Subject: Re: HAL2 driver 0.2 Message-ID: <19990408061452.A5242@bun.falkenberg.se> Mail-Followup-To: Matthias Kleinschmidt , Linux SGI References: <19990406221641.A6206@bun.falkenberg.se> <19990407015956.A2584@fmc-container.mach.uni-karlsruhe.de> <19990407122257.D19733@bun.falkenberg.se> <19990407134133.A925@fmc-container.mach.uni-karlsruhe.de> <19990407202731.A1042@bun.falkenberg.se> <19990407171538.A3751@fmc-container.mach.uni-karlsruhe.de> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii X-Mailer: Mutt 0.95.4i In-Reply-To: <19990407171538.A3751@fmc-container.mach.uni-karlsruhe.de>; from Matthias Kleinschmidt on Wed, Apr 07, 1999 at 05:15:38PM -0400 Sender: owner-linux@cthulhu.engr.sgi.com Precedence: bulk > Ok, I apologize. I forgot to rebuild soundcore.o. Now I can load the > modules. But the order in your HOWTO is wrong. I had to load snd-timer > before snd-pcm1. Playing wavs and mpegs works as well after building the > ALSA devices. Ok, this is another thing I forgot. I did a ``make install'' once so my devices where ok all the time. Maybe I can extract that util which sets up the devices from ALSA or is it included in the RPM? I've fixed the HOWTO now. > Great job! Thanks :-) > > rpm --rebuild alsa-driver-0.3.0-pre5-2.src.rpm > > Unfortunately that did not work. Maybe because all files in that package have > timestamps Jan xx 2000? I have set my clock correctly now, I actually did that yesterday. I have also touched the all the files on my harddrives so I will not end up with any Jan xx 2000 files again. I'll upload correct versions.. - Ulf