From: "Giuliano Pochini" <pochini@denise.shiny.it>
To: toa@pop.agri.ch
Cc: linuxppc-dev@lists.linuxppc.org, x-linux-kernel@vger.rutgers.edu
Subject: Re: MO-Disk on PPC with 53C94 SCSI-chip
Date: Thu, 19 Aug 1999 22:45:46 CEST [thread overview]
Message-ID: <199908201732.TAA09408@mail.shiny.it> (raw)
>I have a LinuxPPC R5 system running on a PowerMac 7200 with the
>2.2.12pre8 kernel.
[...]
>I can create a fs on the partiton, I can read/write from/to it. BUT,
>when I try to change the side of the media I get the same fs tree as
on
>the first side.
Some removable medias don't tell Linux when you change the disk. The
easies way to make it work is to try to mount the device before
reinserting a new disk (you'll get some orrors of course... ignore
them), so Linux notices you changed it.
>So I tried booting without media in to verify if it works on the clean
>way. This what the dmesg says:
[...]
Strange. I get a "READ CAPACITY failed, blah blah blah", but then all
works fine.
[PMac 7300, MO Fujitsu 640MB on ext. SCSI bus]
Bye.
[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting. ]]
next reply other threads:[~1999-08-19 20:45 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
1999-08-19 20:45 Giuliano Pochini [this message]
-- strict thread matches above, loose matches on Subject: below --
1999-08-19 18:08 MO-Disk on PPC with 53C94 SCSI-chip Andreas Tobler
1999-08-20 18:41 ` Sriranga Veeraraghavan
1999-08-23 14:02 ` Jerry Quinn
1999-09-06 11:23 ` Andreas Tobler
1999-09-06 19:31 ` Simon Piette
1999-09-07 0:43 ` Paul Mackerras
1999-09-07 18:59 ` Jerry Quinn
1999-09-08 0:44 ` Paul Mackerras
1999-09-08 1:13 ` Joshua M. Thompson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=199908201732.TAA09408@mail.shiny.it \
--to=pochini@denise.shiny.it \
--cc=linuxppc-dev@lists.linuxppc.org \
--cc=toa@pop.agri.ch \
--cc=x-linux-kernel@vger.rutgers.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.